EASIEST Method Ever For Making Gable Roof Rafters Without Complicated Math Formulas

Sdílet
Vložit
  • čas přidán 14. 06. 2024
  • www.homebuildingandrepairs.co... Click on this link for more helpful videos about roof framing, new house construction and home remodeling. This video will provide you with the easiest method possible for calculating and making gable roof rafters without a master carpenter or little experience.
    Check Out Our Other Home Design And Building Projects
    434 Square Feet Small Home Design And Building
    • 434 Square Foot Small ...
    850 Square Feet - Two Bedroom House Building Project
    • 850 Square Foot 2 Bedr...
    1923 Old Home Framing Project
    • Attention Viewers: I'm...
    Two Story Open Floor Plan House Building Project
    • Two Story Open Floor P...
    L Shaped Floor Plan Building Project
    • Three Bedroom L-Shaped...
    Two Story House Building Project
    www.homebuildingandrepairs.co...
    Small Home Addition Project
    • Design And Constructio...
    Small 3 Bedroom House Design And Framing Project
    • Part 1 - Floor Plan Me...
  • Jak na to + styl

Komentáře • 697

  • @frankgrammatico3827
    @frankgrammatico3827 Před 3 lety +144

    Been involved in construction for several decades. Also taught the subject. Read many books and believed in simplicity. I must say that this is one of the best videos I have ever seen. Basic, simplistic and easy to understand. Kudos to you sir. You should be teaching in an Apprentice school. Absolutely great job. Beautifully illustrated. Thank you. A joy to watch.

    • @gregvancom
      @gregvancom  Před 3 lety +12

      I never get tired of comments like yours and sincerely appreciate reading them.

    • @christinerameau885
      @christinerameau885 Před 3 lety

      I am new to construction, and I am builing a 12 x 16 shed. Why is there not a video with simple plans for a 12 x 16 simple 2 x 6 rafters joined with a gusset so iIdon't have to fiques out the math?

    • @2nickles647
      @2nickles647 Před 2 lety +6

      @@christinerameau885 you can order a complete 12 x 16 shed as a kit. No math. Just read the plans and nail it together. But if do not want order a kit. Then Math is necessary to measure and build it.

    • @eliguaso22
      @eliguaso22 Před 2 lety +2

      @@christinerameau885 There is. Bushradical have amazing videos on small tiny cabins. I got the enough motivation from him and his wife.

    • @ziggypetrovic7620
      @ziggypetrovic7620 Před rokem

      This is an excellent introduction to the construction of a roof, clear, concise and easy to understand. It explains the angles & geometry of the build and the reason it works the way it does. A superb example of how to teach. Well done that man.

  • @jjnini9754
    @jjnini9754 Před 4 měsíci +12

    Finally a roof raft video I understood for this C- math student! Thank you!

  • @woodchuck1800
    @woodchuck1800 Před rokem +5

    I'm building a 600 square foot shop- and know nothing about roof rafters or how to design them, i have wached about 15 you tubes on the subject all say the same thing, follow these very simple math equations and you will know how to cut a roof rafter, well i say to them bull hunky. i was starting to pull out what small amount of hair from my head that i have left when i said i will try this vid but it's the last one before i call in a professional. Thank you thank you thank you. i finally get it and i feel very confident now that i can do this. the world needs more teachers like you,

  • @rl4you369
    @rl4you369 Před 19 dny +1

    Very few people could explain in a simple way thank you nice

  • @scotseitz2641
    @scotseitz2641 Před 3 lety +22

    I appreciate the detailed way you describe the "math" and the layout concepts. Don't change the way you are presenting your content. You method "cemented" the concept into my mind so well that I doubt I will ever forget it or need a review. My next stop is your link for more helpful videos. I am a fan.

  • @andrewnewby1918
    @andrewnewby1918 Před rokem +12

    This is probably the best video I’ve watched describing how to create a pitched roof for those not familiar with construction methods. Simple, well explained and easy to follow. Well done and thank you 😊 👍

  • @earlsmith2931
    @earlsmith2931 Před 3 lety +15

    This is he easiest i've seen for cutting roof rafters good job.

  • @ashleam1489
    @ashleam1489 Před 3 lety +6

    Finally, a way to understand how to do this! I'm mathmatically challenged so this was soooo helpful. Thank you.

  • @dougstewart3546
    @dougstewart3546 Před 3 lety +9

    Brilliant video, Greg! Thanks for taking the time and providing your expertise to us.

    • @gregvancom
      @gregvancom  Před 3 lety

      As always, thanks for the kind words.

  • @kevinthigpen8652
    @kevinthigpen8652 Před 3 lety +6

    I am not an experienced Carpenter however I do have some basic carpentry skills. I am in the planning process of building my own off grid house and was extremely confused and a little bit scared about building the rafters because of the complicated way everyone explains them. I feel like after watching your video I now have the confidence and understanding I need to successfully complete the task of putting up rafters. Thank you very much for the wonderful way you have taught this process through this video. Please keep up the good work and I will be subscribing

  • @crowolf65
    @crowolf65 Před 3 lety +65

    Brilliant. The ability to convey an understanding in the simplest way possible is a mark of brilliance. Beautifully done.

  • @armoris66
    @armoris66 Před 3 lety +1

    The BEST, SIMPLEST, EXCELLENTLY PRESENTED guide to shed rafter layout on the Tube. Watched this a couple of times now and provided you make sure you are working from a square base, is fool proof. 👍🏾👍🏾

    • @gregvancom
      @gregvancom  Před 3 lety

      Square foundation make everything easier and glad you learned something new.

  • @Lantern1100
    @Lantern1100 Před 3 lety +7

    I have been wanting to build my own work shed for about a year now. After watching this I can say I feel very confident about going through with it. Thank you for your video.

    • @gregvancom
      @gregvancom  Před 3 lety +2

      That sounds awesome and good luck on your project.

  • @Real-Americans-For-Trump-2024
    @Real-Americans-For-Trump-2024 Před 9 měsíci +2

    After spending hours on learning how to make these type of rafters, and putting together all the math that’s involved, I have to say this looks to be the easiest way for a DYI like me.
    Thank you.

  • @dno2760
    @dno2760 Před 3 lety +1

    Thanks. You have simplified roof rafters and I need simple!

  • @UpperSkyDJ
    @UpperSkyDJ Před 3 lety +11

    Thanks for taking the time to share your simple rafter knowledge.

    • @gregvancom
      @gregvancom  Před 3 lety

      You're welcome and keep learning.

  • @sergeykazantsev1
    @sergeykazantsev1 Před 2 lety +4

    Super! I always love to figure things like these on the slab somewhere first with live sizes. Then just step back with the framing from the edge of a thickness of plywood wall sheeting and then you don't need to fuss with the roof, since it's ready to go to be installed fast being precut.

  • @kurthamblin598
    @kurthamblin598 Před rokem +2

    Great video. The explanation goes right down to the layman.

  • @fuzzyfultz
    @fuzzyfultz Před 3 lety +8

    Awesome, thank you Sir. Never in my 57 yrs have I heard anyone explain this in such a simple way. You have made it so easy. Thank you again.

  • @Pk-kp7sn
    @Pk-kp7sn Před rokem +1

    This makes all the sense in the world to me. Thanks so much!

  • @chrispoole2616
    @chrispoole2616 Před 3 lety

    Great job. This makes it so much easier. Thank you

  • @OldPain2GoStevenBlake
    @OldPain2GoStevenBlake Před 3 lety +8

    I love it when people make it clear and simple - you did!

    • @gregvancom
      @gregvancom  Před 3 lety +1

      Glad to help and thank for letting us know you love it.

  • @Emad-xl7gp
    @Emad-xl7gp Před 3 lety +1

    Thanks for your kind teaching

  • @fckmunch
    @fckmunch Před 3 lety +4

    I'm just about to build my own house and was looking for an easier way to measure the rafters. This is just spot on, cheers!

    • @gregvancom
      @gregvancom  Před 3 lety

      Great and thanks for letting us know!!!!

  • @patriciarobinson4267
    @patriciarobinson4267 Před 3 lety +1

    You did a perfect job explaining everything. Great cad work. 🧡👍👍

  • @marcofonseca2519
    @marcofonseca2519 Před 2 lety

    Liked very mutch. Finally someone was an convicent explaining.

  • @lonnieclemens8028
    @lonnieclemens8028 Před 10 dny

    Today I started working on the attic floor. Tomorrow hopefully the the ridge beam. I am excited!

  • @abefroman3903
    @abefroman3903 Před 3 lety +1

    Brilliant ...laying it out on the slab .I have never seen that before , great video

  • @TheRobinsegg1
    @TheRobinsegg1 Před 3 lety +1

    Thank you, making a simple garden project . To the point!

  • @rickmorales2113
    @rickmorales2113 Před 3 lety +5

    Very informative, am learning something so useful, Thanks Greg!!

    • @gregvancom
      @gregvancom  Před 3 lety

      Glad to hear it and thanks for letting me know!

  • @brandtstone2791
    @brandtstone2791 Před 3 lety +3

    Awesome ! So simple 😎

  • @ginozanga2129
    @ginozanga2129 Před rokem +1

    This has been the most simplest way to do trusses I’ve seen for preparation of building my 10x12 shed….ty

  • @mattschamel6550
    @mattschamel6550 Před 2 lety

    Perfect! That was the simplest explanation I've ever seen! Thanks!

    • @gregvancom
      @gregvancom  Před 2 lety

      Glad it helped and you're welcome.

  • @mikeross6236
    @mikeross6236 Před rokem +1

    Well done!!!!

  • @ProjectWoke
    @ProjectWoke Před 4 měsíci

    Soon I am starting the shed project. I wanted to do gable roof. Have been watching a lot of videos and this one made everything crystal clear and made it easy❤

  • @minkademko2335
    @minkademko2335 Před rokem

    Easy to understand. Thanks for this 🙂

  • @douglasharper7287
    @douglasharper7287 Před rokem

    I was kinda confused as a novice carpenter but helped me out and explained it well so now I’m good and understand.. thanks

  • @MrPhotographer77
    @MrPhotographer77 Před 3 lety +1

    I didn't know how this was done. First time seeing this. I love it!
    I'm glad I watched this vid to learn the easy way first.

    • @gregvancom
      @gregvancom  Před 3 lety +1

      Thanks for sharing and glad you enjoyed the video, keep learning.

  • @patrickzadd5215
    @patrickzadd5215 Před 2 lety +1

    Excellent video
    thank you!

  • @tydingshomeremodeling2667
    @tydingshomeremodeling2667 Před 8 měsíci +1

    This is an excellent video.

  • @anthonyz7327
    @anthonyz7327 Před 3 lety +1

    Very good video simple and easy to understand 👏👏👏👏👏

  • @robertoacosta8539
    @robertoacosta8539 Před 3 lety +1

    That makes my job easier thank you so much I love ur explanation

  • @bluegrassers
    @bluegrassers Před měsícem

    Thanks for an eye opening video👍

  • @JuanSilva-se6bb
    @JuanSilva-se6bb Před 3 lety

    EXCELLENT WAY TO EXPLAIN HOW TO CUT THE RAFTERS.

  • @windsong832
    @windsong832 Před 3 lety +2

    I love your teaching method! Two thumbs up. Don't change your teaching style. Everyone learns differently. If your style does not work for a viewer, than it should be the viewer's responsibility to search for one that best suites their learning needs. You keep up the good work. I subscribed and liked!

    • @gregvancom
      @gregvancom  Před 3 lety

      Thank you so much for the kind words and support 😊

  • @Joesdifferent
    @Joesdifferent Před 3 lety +3

    I can tell you right now I love the video and the longer I would choose to watch due to the fact it's more information that you're going to be able to teach me I'm 50 years old but in this industry since I was 17 years old I know mostly everything that there is to know except brilliant ways like this following the rules of carpentry makes this one of the most efficient ways I've ever seen in my life thank you very much for taking the time and educating me I can't wait to see what you have next

    • @gregvancom
      @gregvancom  Před 3 lety

      What an awesome compliment and I myself started full time when I was 17.

  • @mikegrigoriadis9484
    @mikegrigoriadis9484 Před 3 lety

    Man! there's always someone that doesnt overthink things and you are the man!!!! Thanks!

  • @Manny-mq8gm
    @Manny-mq8gm Před rokem +1

    Excellent easy to understand explanation of rafter basics

  • @clem95627
    @clem95627 Před rokem +1

    Great explanation of the rafter process.

  • @wesleylawrence6439
    @wesleylawrence6439 Před 3 lety +1

    Thank you!

  • @Emad-xl7gp
    @Emad-xl7gp Před rokem +1

    Vety useful video thank you

  • @midwesthoodvents882
    @midwesthoodvents882 Před rokem +1

    perfect!!! thankalot!

  • @wilko3034
    @wilko3034 Před 10 dny +1

    Very clear, thank you sir

  • @larrytaylor7753
    @larrytaylor7753 Před rokem

    So simple. Thank you!

  • @Good-Citizen
    @Good-Citizen Před rokem +1

    I think your videos are very informative. Thanks amigo.

  • @paulineturpin7086
    @paulineturpin7086 Před 6 měsíci

    I have no experience in building anything. I decided to build a greenhouse to protect my plants from the freezing weather this winter. I was having trouble figuring out how I would make my roof. Your video has helped me figure out what to do to get a stable roof and how to cut my angle at the top. Thank you for making it so easy. Don't change your videos. I'm attaching to my house and using 2 x2 x8 boards and plastic to cover the roof and sides. Nothing is level or at right angles. Fun projects! Thank you.

  • @codygregory5883
    @codygregory5883 Před 7 měsíci

    Very helpful !

  • @sescher4487
    @sescher4487 Před rokem +1

    Dude, what? Super smart. Great idea.

  • @FRANCISCOSANTOS-vb6uy
    @FRANCISCOSANTOS-vb6uy Před 3 lety +1

    Very impressive! Very legible; I don’t think it can be better than that; I’ve been watching many videos, and honestly, all of them, all the contractors have been very professional; but yours is the clearest that I can see, thank you so very much, believe me, you just gave me a big and great solution about what I was looking for; thanks again!.

    • @gregvancom
      @gregvancom  Před 3 lety

      You bet and comments like yours are awesome.

  • @fidelischiti3285
    @fidelischiti3285 Před rokem

    I love it, the method is simple and straight forward . Thanks

    • @gregvancom
      @gregvancom  Před rokem

      Comments like yours are always appreciated:)

  • @nelsonwitz912
    @nelsonwitz912 Před 2 lety

    All the way from Belize central America, thumbs up to your video, it is so easy to understand, on how to cut roof rafters.

    • @gregvancom
      @gregvancom  Před 2 lety

      All right and glad you learned something new.

  • @adamlantsbery6477
    @adamlantsbery6477 Před 3 lety +2

    Education without overthinking. Great video. Thanks 😊 🙏

    • @gregvancom
      @gregvancom  Před 3 lety

      Keeping it simple, you're welcome and thanks for letting us know you like the video.

  • @timothybageant7429
    @timothybageant7429 Před 2 lety

    Nice job ... thank you

  • @KG6AFF
    @KG6AFF Před 4 měsíci

    GREAT !!!
    I love how simple it can be made, ...
    leaving all those whom invest tons of money into tools out to dry...
    meaning... it's not as important to have all the fancy tools as one might think... just need saws, pythogaerom theorem, calculator pencil, paper or something to write on like wood to make note and marks and measuring tape, maybe chalk line... (clear water hose ends with fluid in them for leveling) ... that is all you need, and most important IDEA of what you want to do and how to do it studying these youtube videos really helps, one really has giant advantage that all the previous generations of builders never had... youtube is a coach is like having GPS maps in your car is helpful to all whom previously used paper maps and counting freeway exits to your destination for turn off connecting roads on the way to somewhere else... love youtube and everyone taking the time to teach, many many thanks!
    -tibor

  • @Jeremy-lo6gk
    @Jeremy-lo6gk Před rokem +1

    Wish Id seen this before I built my project very good job explaining thx.

  • @gregmonz697
    @gregmonz697 Před rokem

    Thanks for that , now I get it . Been pounding my head with all these other videos doing all this math . Your way is so simple and easy . thanks again . Greg

  • @YoItsCalos
    @YoItsCalos Před 3 měsíci

    been watching rafter videos for days now trying to understand it because I'm planning to do a roof by myself. This is the only video so far that didn't lost me in all the difficult mathematical steps.

  • @robertallen3133
    @robertallen3133 Před 8 měsíci

    Thank you ! Fantastic video !

  • @jerodlyford10
    @jerodlyford10 Před rokem +1

    Great video

  • @trade0714
    @trade0714 Před rokem

    Did I like this video? Oh hell ya! The simplicity of this method is astonishing.

  • @jasonmueng9274
    @jasonmueng9274 Před 3 lety +2

    Brilliant, thanks for the video!

  • @deanallen8450
    @deanallen8450 Před 3 lety +1

    I never thought about laying out on the slab. Thanks for the pro tip.

  • @MrMannychiva
    @MrMannychiva Před 3 lety

    Videos like this one makes it alot easier...BRILLIANT... THANK YOU.

  • @user-uh4ti7dh7y
    @user-uh4ti7dh7y Před 4 měsíci

    Yes it is very good information I love it ,thank you.

  • @garynasrallah8710
    @garynasrallah8710 Před 8 měsíci

    Made very good sense, thank you,very thorough. That was a very easy way to explain it.
    Much easierto figure out on the floor than it is up in the air.

  • @markirish7599
    @markirish7599 Před 2 lety

    Fantastic video thanks and best wishes from Ireland 🇮🇪

  • @leoanrdescalante5783
    @leoanrdescalante5783 Před 3 lety

    Thank you very helpful.

  • @crr2762
    @crr2762 Před rokem

    Finally. I found what I needed to be able to build my shed rafters. Thank you very much. New sub.

  • @user-ds8jk2cj1r
    @user-ds8jk2cj1r Před 7 měsíci

    Amazing. Simple, thorough, and very much appreciated

  • @Togglefree
    @Togglefree Před 3 lety

    Excellent. Easy to understand. Thank you!!

  • @mikemcgown6362
    @mikemcgown6362 Před 3 lety +1

    You made a complicated project very easy to understand. Thank you so much for the video. I understand this will work for any size rafter on any size building. It all correlates with the size of building. Got a thumbs up from me!

  • @JuanSilva-se6bb
    @JuanSilva-se6bb Před 3 lety

    NICE, THANKS

  • @TT3TT3
    @TT3TT3 Před rokem +1

    Nice!

  • @MrAlespa
    @MrAlespa Před 3 lety

    Probably one of the best CZcams channel I ever seen.

    • @gregvancom
      @gregvancom  Před 3 lety +1

      I always enjoy reading comments like yours and I agree:)

  • @ZZZ333
    @ZZZ333 Před rokem +1

    Finally I understand it now 👍🏼👌🏼

  • @rufusdurham8395
    @rufusdurham8395 Před 2 lety +1

    I love 💕 the video it's easy

  • @austinmmanuel
    @austinmmanuel Před rokem

    This is the most helpful video on this subject I have found. Thank you!

  • @thefoolspeakstruth7435

    Excellent video, bravo. If only I saw this a few months ago it would’ve made my job a lot easier. Thanks

    • @gregvancom
      @gregvancom  Před 3 lety

      That's a comment I hear often, but at least you will know for the next time, if there is going to be a next time.

  • @dougburke50273wind
    @dougburke50273wind Před 3 lety

    Makes so much sense, thank you, great tip.

    • @gregvancom
      @gregvancom  Před 3 lety

      Glad it made sense and you're welcome.

  • @thomasj.mcneil3136
    @thomasj.mcneil3136 Před 3 lety +1

    Very good explanation. Thanks Tom

  • @ypcharly
    @ypcharly Před 2 lety +1

    I like your explanation a lot

  • @R3LI2UI
    @R3LI2UI Před 7 měsíci

    Thank you, nicely done!

  • @travis1572
    @travis1572 Před rokem +1

    Woah,
    I think I got it THANKS

  • @franklinbittner4683
    @franklinbittner4683 Před 2 lety

    Great job thank you very much,I’m a very experienced carpenter and I always learn something with you!

  • @duncanread587
    @duncanread587 Před 2 lety

    Great stuff. Hope this guy does more deck vids.

    • @gregvancom
      @gregvancom  Před 2 lety

      Noted and yes to more deck construction videos.

  • @linethsanchez3656
    @linethsanchez3656 Před 3 měsíci

    Your video are very good Alex from Panama thanks

  • @user-zb3ws1lv5x
    @user-zb3ws1lv5x Před 7 měsíci

    Thank You for this Great video!

  • @georgeomalley6066
    @georgeomalley6066 Před rokem

    ♥️ The Method, Great for the younger generation for Quick checking their layout

  • @edwardsantiago6433
    @edwardsantiago6433 Před 3 lety

    Awesome explanation, just what I was looking for.

    • @gregvancom
      @gregvancom  Před 3 lety

      Great to hear and thanks for watching!

  • @josemachorro4239
    @josemachorro4239 Před rokem +1

    Nice video