Video

I agree. They suck and should be shut down for false advertising

Great test man!

Looks like a Lunar lander LOL

are the alumminums really strong? has it bend or break it yet?

Please please respond, i recently bought a 24w Kobalt drill and i didnt think about asking for the charger and so now i just have the drill and the battery, it works very well but i would like to get a charger for it, it is a 24w brushless 2.0ah. Could you show me where i can get the charger for it?

Can you use the chisel to remove a stubborn brake rotor from car?

Спасибо, сделали детальный обзор, единственный мне нужный.

Your furbabies are so good for you. And soooo cute too!! Thanks for the demo....thank your pets too!! 🥰

Wow, with your video that was super easy. Thank you!

You need a little bit of a ladder for her to look at the ep

15:24 Superb watching and sounds... love the Delos specs, price and its sound too. I own a very modest set of vintage TVs--my favorite is the discontinued, massive, dual-barrel 22 mm Panoptic--awesome :-) also fun is the discontinued 7 mm Nagler Original, the discontinued 15 mm TV Wide-Field (65 deg AFOV) and the still-selling 40 mm Plossl (even though it has an AFOV of 43 deg). Tele Vue has contributed so much to eyepiece design and support of amateur astronomy; I like being a part of that historically. I don't know why most of my eyepiece choices were eventually discontinued by TV--but am now looking to replace an old 10 mm Plossl with a 10 mm Delos or even the great-God Ethos.

Your Super Vee still looks brand new yet, thanks for the demo you filled in some blank spots for me, now I can go buy one!

That's was very thorough. Thank you!

that was a lazy kid who is pissed off about their job.

Great points.

We have an older one, and this one. Great purchase!

Nice way to lift the tractor. I have a J&S motorcycle lift that is built like your Keck motorcycle lift. Thanks 👍🏽🤠 07/10/24

thanks for that i have the lunt 50 pressure tuner and putting a dove tail on the cradle rings is not the easiest i wish they gave it with 2 rings and a bar or at least give it with a vixen car already made for the cradle

Excellent video Tony. Clarifies a lot of questions I had about the process. Jeff B, thank you for doing this.

This telescope is superb optically and mechanically. However I ran the price per inch test, otherwise known as the money left in my wallet test on this telescope and it failed me miserably as after looking into purchasing one my financial advisor said I would need a second mortgage to fund it. Then again also you might need a gym membership and bench weights periodically to keep in shape to be able to lift it and use it as you get older. But you can still dream of having one someday and still enjoy videos such as this one.

Thank you for saving my Camera, tried every video I found and nothing worked, until I found yours and it finally works!

Great informative video, very interesting!

Nice video! Thanks for sharing.

That price is steal!…you can’t even buy the aluminum alone at that price. These are handy tools to have.

Thank you for posting- my steamer stopped working and I followed your instructions. Working now ❤

Wow, great presentation. Thank you very much my friend and your friend, thanks.. greetings..

Thanks for the video and expert commentary. I’d also be curious to read up on any references Jeff might have in his testing. I’m wondering about the mirror and the grating (where they might be obtained - I’m overseas in Australia ). It would be great to get Jeff’s experience and those steps down on a doc that I could print. Thanks again for the effort and the thought of doing the video

I like how the Takeya's color looks like a Takahashi refractor's trim color.

Awesome telescopes! Very interesting testing process too... Thanks Tony! Very good interview.

Thanks

Hello Mouse !❤ hello from France....🇺🇸🇲🇫😎👍

Hello my friend. Interessant APP. I just used for many year with my iPhone, the APP ( PS Align PW Pro ). In this APP give diverse polar finder for diverse mount company, and the new RAPAS Astro Physics. I make the Polars setting for my AP1100, and the Polar finder RAPAS the Star have the possibility to Zoom activate, also are possibly very precise setting to make. I don't not you know this APP PS Align PW Pro. Greetings and thanks.

Very good video you explained it very well. People are saying in other video's it is a scam. No it is not a scam you just have to have a little knowledge.

Does 8amp fit inside the shop vac an misting fan or regular fan?

It's a total scam This is the second rebate that hasn't shown up. I don't know how they get away with it.

Great video. I'm having the same problem with my Cub Cadet two-wheeled trimmer. A 10mm ratchet wrench would help with removing that white vane gadget if there's room for it.

This fan works great inside and outside. We took it to the beach which was a nice time because we needed that extra breeze to stay cool, it was a game changer in that 90 plus degree weather. This is a great travel fan. We take it everywhere we go because you never know when you need a fan. We have two fans with two extra batteries always ready to go. These are a must have. The air flow is fabulous, it also has a super long run time even on high speed.

This stuff makes me sad bro 😢 That coward of a cop does not deserve the badge and it makes me angry how careless he was 🤬

Anyone that thinks it's anything other than A stupid COP is also a DUMBASS

Is your back wheel bent in on your trailer on the drivers side or is it an optical illusion , I noticed it at the beginning of the video and you can really see it better at ( 11:01 ) ?

Never had such awful internet in my life until I used spectrum. It feels like every week the internet just goes down. However now takes the cakes. We leave to visit family for a day and we come back the next day and (long story short) we find out the router managed to brick itself somehow while we were gone. Took 3 days for them to send someone to come fix it. The worst part is is that there isn’t even a different provider we can go to. It’s like they have a monopoly here.

Y’all think y’all have it bad try working for these fucks

Honestly you really need a Nagler Type 4 22mm with the 82° field of view and 19mm of eye relief. Get the 2x Powermate for 11mm and the 4x Powermate for 5.5mm, all at 19mm of eye relief and the most addicting view of the stars. Clear skies.

I live in an apartment over 600 units where the owners have just signed an agreement with Spectrum for bulk internet and TV. The cost is $80 per month, where the download speed is approx 100 GiG, and the upload is about 27. The service is a combination of fiber into the building and coax (cable) to your apartment on a shared bandwidth. Right now I have AT&T fiber for $60 per month true fiber all the way to the router. I currently have 500 Gigs up and down (symmetrical). I can also increased to 1 gig symmetrical for $70. I don't watch much TV outside of Netflix and Prime. The owners are telling me that if I renew the lease, Spectrum charges will be automatically added to my monthly rent. So I can either keep AT&T Fiber which is superior and pay for 2 services or be force to cancel AT&T so I only pay for one service. The owners even tried to charge me for 2.5 months of Spectrum ahead of the new lease that I had to argue for 6 weeks and threaten legal action for them to remove the charges. I am dreading the upcoming lease and looking to move just to avoid the horror stories of some tenants that are already using Spectrum's horrible service. Since it's bill through the rent portal even if there's an outage you are forced to pay the entire amount. The FCC needs to close the loop hole and make bulk internet illegal. The purpose of deregulation was to even the playing field with fair competition and give customers the option to choose whichever provider offers the best value. Some people don't require fiber or TV service and still have to pay for this garbage.

Tha k u for posting this

surely they won't let you return it after you dropped it on the ground

Great video and nice research. Unfortunately, the Volt battery packs were a terrible design. Picture 96 flat pouch cells with cooling plates between each one. Each cooling plate has 2 o-ring gaskets, so 192 o-rings all sandwiched together waiting for one of them to leak. Dealers don't fix batteries, they just replace the whole thing. With the early models, they didn't think about putting moisture detection in and relied on the high voltage isolation detection circuit to detect a problem. Unfortunately, the corrosion is so bad at that point, the pack is junk. If this person lived in a CARB state, it would have been still covered under warranty. My 64kWh battery pack in my Bolt is $12k with a simple cooling loop in the bottom vs the Volt's 16kWh battery (1/4 the capacity) with all its over-engineered nonsense. We also have a Honda, great vehicle. We need two vehicles, so making one of then an EV and charging from the sun was little risk for us.

now that is a clean engine bay

I have this set, have not used all the bits, but so far so good. Great set of bits for the price.

I go on Ebay and buy new old stock Craftsman that is USA made (USA steel). Honestly, I have some PRC made Craftsman sockets for my 3/8" drive, and they work fine. But I just feel better about having made in the USA on my tools. Although, it's hard to justify spending $11 for a G2 (one of the made in USA date codes) socket verses a couple of bucks for PRC made Craftsman. Armstrong still makes tools in the USA, but they are like crazy expensive. Snap On used to be a brand to trust, but they are currently making some stuff in the PRC (and are dang sneaky about their labeling too). For me, I rank: Tier one: Made in USA A close second Tier two: German, English, Japanese, Swiss, Canada Somewhat distant gap Tier three: Taiwan, Vietnam, India (although some Indian made tools are dang good - especially some surgical tools) Another big gap Tier four: PRC, other European countries Bottom rung: other countries without a history of decent steel production. Some countries can have outstanding expertise in other area, for example Chile in mining, or South Africa in cell phone RF tech, but they just don't have the quality manufacturing reputation of tooling.