Ron Bond
Ron Bond
  • 9
  • 42 722

Video

2006 Volvo S40 2.4i UPSTREAM B1S1 o2 sensor how to replacement. engine trouble code p0031 b1s1.
zhlédnutí 6KPřed rokem
2006 Volvo s40 2.4i Bank 1 sensor 1 replacement how to. Volvo engine trouble code p0031. B1S1 replacement. you will need a Deep-well/ atleast 3inch deep o2 sensor socket is 7/8 or 22mm in a 3/8 drive. for b1s1 part on 2006 Volvo s40 2.4i the part number is # 234-9150 on AMAZON for the UPSTREAM o2 sensor. also, remember to check the Fuse F33 under the engine hood before repair to ensure the fuse...
2006 volvo s40 2.4i automatic gear shifter blind replacement/repair how to D.I.Y
zhlédnutí 2,6KPřed 2 lety
this is a repair video for a automatic transmission shifter blind replacement/repair and step by step how to D.I.Y ( do it yourself ) video. for a 2006 volvo s40 2.4i if any questions or concerns I can make another video or answer questions to help. hope this helps everyone
2006 volvo s40 2.4i spark plug replacement how To.
zhlédnutí 2,6KPřed 2 lety
2006 volvo s40 2.4i spark plug replacement how to.
2006 Volvo S40 , S50 , S60 , VOLVO sunroof Leaking backseat Leaking. drain clog. leak on floor
zhlédnutí 6KPřed 2 lety
this is a step by step repair or fix for sunroof Leaking or Clog in Volvo S40 2006 and up. water in backseat floor, water on driver side floor water on passenger side floor. sunroof clog and draining issue's. tools you will need Needle nose pliers, flat head Screwdriver, Dish soap, and universal set of push clips for car door/glove box
maintenance light Reset for Volvo 2004 to 2007 how to reset light. 2006 volvo s40 2.4i
zhlédnutí 594Před 2 lety
how to do a Maintenance light reset for 2004 to 2007 Volvo Volvo s40 or Any type of Volvo within the 2004 to 2007 year
P0335 2006 Nissan Pathfinder explanation of symptoms
zhlédnutí 2,4KPřed 4 lety
This is a symptoms explanation of what is going on with the 2006 Nissan Pathfinder crankshaft Position Sensor A circuit P0335
2006 Nissan Pathfinder Code P0335 Crankshaft Position Sensor Circuit A replacement Nissan repair
zhlédnutí 22KPřed 4 lety
This is a 2006 Nissan Pathfinder LE V6 4.0LT 4WD Repair and step by step explanation for the Trouble code P0335 location and repair Crankshaft Position Sensor circuit A It is located inside the Passenger front wheel hub cover area
How to make a Bucket Wheel/Hedgehog/hampster/small animal DIY
zhlédnutí 429Před 4 lety
Today I will show you all how to make a Bucket wheel you will need 4. #6 32x3/4 machine bolts 4. #6 flat washers 4. #6 32 nuts 1. 1/4 swing nut 4. 1/4 nuts 2. 1/4x 1 &1/4 or upto 2" flat washers 1. 1/4x 3 &1/2 hex head bolt 1. 2gal Bucket cut from bottom edge 5 inches from bottom edge. 2 or 3. 3' x 1/2" pvc... optional 1. 3'x3/4" pvc 1. 3/4" PVC T.... 2. 1/2" to 3/4" adaptors for the T.. 2. 1/2...

Komentáře

  • @jorgemora7190
    @jorgemora7190 Před 23 dny

    Wow very good job Ron thanks for your time

  • @ilyrosbin
    @ilyrosbin Před 27 dny

    Hey so I’m having trouble with a 2006 Volvo s40 2.4i and I’m getting p0171 with p420 and the p0171 could be a bad oxygen sensor but it could be MAF sensor as well. What are your thoughts?

  • @HectorxHector
    @HectorxHector Před měsícem

    Old girl did not want to come out 😂😂

  • @ronbond3777
    @ronbond3777 Před 2 měsíci

    Video Poster Update. This is an UPDATE to question. I will add another video soon of Rear sunroof Drains. But read comment below. Sorry i forgot to mention this in the video. You also have 2 Rear drains as well. Backside of the sunroof. They run down you rear " Oh Shyt Handles " to the rear of the car. I did this video because only my front one's were clogged. So to get to the Rear drains you must take down the rear " Oh Shyt handles " and slightly pull fown the headliner you will see the tubes. Just make sure you are not yanking the headline because you can damage it. Do the same steps as the front drain tubes and you are golden. I will add a video up soon of me doing the rear drain tubes. As another person commented. They have a " Gurgling sound " when turning on the AC or defrotsters. That would be your AC drain line. The AC drain line is UNDER the floor carpet. You must DISCONNECT BATTERY 1ST. Then You must take out your seats Front seats only Driver and Passenger side Seat wiring Harnesses then the carpet to expose the small drain tube for the AC drain line. It has 2 White connectors with a small black hose. Also remember. DO NOT turn the car on with your seats out and unhooked because some Models have Airbags in the seats and you will have a forever airbag light on if you do. If you need to leave the carpet out to dry the carpet you can just rehook the seats back up and drive with NO carpet. But be sure to Disconnect your batter before taking the seats out and only connect the battery once your seats and a seats wiring harness is Reconnected. Your carpet will be fine to be out the car for a few days until it fully dries out and you fix the issue with the AC drain. Remember your floor well can hold over 2 gallons of water in each side of the floor. So even if it is Just the sunroof drains and you want to take the carpet out to get all the water out you can as well. Just remember DISCONNECT BATTERY 1ST... then Disconnect Seat wiring harnesses on Front driver and passenger Frontside. Then take carpet out. For a few days to dry. Use shopVac to get any standing water out. Hope this helps....

  • @mrDeeds111
    @mrDeeds111 Před 4 měsíci

    thank yoU!

  • @b-radsadventures6846
    @b-radsadventures6846 Před 5 měsíci

    Thanks, but our 2007 S60 looks nothing like this inside. Tube is apparently run inside of the A pillar.

  • @melanietempleton2605
    @melanietempleton2605 Před 6 měsíci

    Ok what is that black thing that looks like a turbo drain under the driver seat? That’s wet…

    • @ronbond3777
      @ronbond3777 Před 2 měsíci

      That isn't a drain. That is your vent.

  • @melanietempleton2605
    @melanietempleton2605 Před 6 měsíci

    It’s not the sunroof, it’s gurgling when the heater is on! Arrrggg!

    • @ronbond3777
      @ronbond3777 Před 2 měsíci

      Then you have a clogged AC drain. That is under your carpet. You will have to take out the seats and carpet to find it. It will have 2 white connections going into the floor of the car and a small black hose.

    • @ronbond3777
      @ronbond3777 Před 2 měsíci

      Any time you use the AC or Heat/defroster it will back up. It probably pushed the hose off one of the white connections

  • @darrenmackay2303
    @darrenmackay2303 Před 7 měsíci

    I have a 2009 Volvo S40 2.4I with a P0171 I did look at the fuse in that location... which was 20A and it looked fine. I plan on ordering a Sensor.. Some sellers say it is for Upstream or Downstream. A Part Number that I've seen commonly is the 234-4734 - which says it's for my car.. But I find the "Fitment Charts" are very Unreliable. Just curious to know if everything has been working OK, and the Code has not re-appeared?

    • @ronbond3777
      @ronbond3777 Před 6 měsíci

      Sorry for the late reply. I had that same code last year. I had a Bad PCV valve. And had to replace the oil filter housing. Came in 1 whole piece. That is about an 1 hour job. You have to use the factory screws to tap the new unit.

    • @ronbond3777
      @ronbond3777 Před 6 měsíci

      No after the repair code had never came up again.

    • @ronbond3777
      @ronbond3777 Před 6 měsíci

      Also btw my fuse looked fine too until I tested the fuse. It was blown as well

    • @ronbond3777
      @ronbond3777 Před 6 měsíci

      Also my part number was 234-9150

    • @darrenmackay2303
      @darrenmackay2303 Před 4 měsíci

      I beleive the s40's have 2 different engine codes. My engine Code is B5244S4- but some are B5244S7. Are you able to confirm which engine code yours is? Some sellers say this part 234-9150 does not fit my car. @@ronbond3777

  • @crazyperson6999
    @crazyperson6999 Před 9 měsíci

    God sent brother

  • @kynlynn9201
    @kynlynn9201 Před 11 měsíci

    Please help! I've been scouring the internet looking for a model similar to mine, I have a 2005 volvo S40 2.4i. Do you know how to remove the MAF sensor? It's so close to the battery, I don't know how to get to it.

    • @ronbond3777
      @ronbond3777 Před 6 měsíci

      Sorry for the very late reply. The MAF is under the intake. You will see a black sensor. Follow the tube from your intake box.

  • @Jims_vintage_strings
    @Jims_vintage_strings Před 11 měsíci

    That showed me next to zero. Not zero, but next to zero. I'm not nooking for a guy to point and say take that off. That's that off then do the job? I wanna see the job done?

  • @Lechuza_Chicana
    @Lechuza_Chicana Před rokem

    I got lost with the pvc 😿 I was trying to write down what to buy . It looks really good 👍

  • @judistokes1888
    @judistokes1888 Před rokem

    Nice of you to show us this on your video. So this little piece will keep my car from going into 'd' and 'park'? And replacing this will let it shift? Sorry, I'm not educated at all about any of this and I have been without a car for a week and getting no where.

    • @ronbond3777
      @ronbond3777 Před 6 měsíci

      If your shifter is binding up yes this would stop you from moving into gears as well. But I can't say for sure that is your issue

  • @year96productions18

    Thanks for the video, sir! I've done all these steps and the code comes up still. Along with a p0340 code. It's an 07 Pathfinder.

    • @ronbond3777
      @ronbond3777 Před rokem

      Their is also a sensor on the driver side same spot as well. If you changed the passenger side sensor and that did not correct it. You will need to do the driver side one.

    • @ronbond3777
      @ronbond3777 Před rokem

      The P0340 code I am almost 100% sure is the driver side sensor behind the driver side front wheel in the same spot

    • @year96productions18
      @year96productions18 Před rokem

      @@ronbond3777 thanks for the response! This would be the camshaft sensor, correct?

  • @chriskaldywellness4906

    Ron, My Volvo S60 2013 gets water on the back floor, driver's side. Why does that happen and is it really just these 2 tubes to clear out?

    • @ronbond3777
      @ronbond3777 Před rokem

      Yes absolutely. You have multiple drain tubes that drains your sunroof out. If you have a sunroof then absolutely you need to do this 1st

    • @ronbond3777
      @ronbond3777 Před rokem

      Sorry for the late response

    • @chriskaldywellness4906
      @chriskaldywellness4906 Před rokem

      @@ronbond3777 you say multiple drain tubes. Where are the others beside the 2 front ones described in your video please?

    • @ronbond3777
      @ronbond3777 Před 6 měsíci

      ​@chriskaldywellness4906 you have one on each side where I am showing in the video. Also going straight down between your dash. And firewall. That has to be blown out as well. But the drains start inside the sunroof lip make sure they are cleaned out as well

    • @double_courage57
      @double_courage57 Před 6 měsíci

      Facing the same issue with my 13' S60. Did you get this resolved?

  • @Dssfox
    @Dssfox Před rokem

    Thanks!

  • @ruthannstiner5534
    @ruthannstiner5534 Před rokem

    I replaced crankshaft position sensor now it starts then shuts off. What to do now

    • @ronbond3777
      @ronbond3777 Před rokem

      Do the reset steps at the end of video. Unhook battery for a few minutes then turn it to on position but not fully on only to where you have power to radio and so on. Then let it reset and then turn it off all the way wait a few minutes then turn it on fully and drive around your home close to your home for a few minutes

  • @savyyoeun7149
    @savyyoeun7149 Před 2 lety

    Hi I am Savy I just replaced a crankshaft position sensor A on 2007 Nissan Pathfinder but it still arror cod p335. So what should I do next? Thanks

    • @ronbond3777
      @ronbond3777 Před rokem

      Towards the end of video there is a reset step by step on how to reset this code.

    • @ronbond3777
      @ronbond3777 Před rokem

      Did this fix it?

  • @nickpearson3481
    @nickpearson3481 Před 2 lety

    Thanks for this 🤙🏼

    • @ronbond3777
      @ronbond3777 Před rokem

      You are very welcome. Did this help/solve your issue?

  • @Ashley-tq5fj
    @Ashley-tq5fj Před 2 lety

    ρяσмσѕм 😭

  • @edgarima
    @edgarima Před 2 lety

    Thank you

    • @ronbond3777
      @ronbond3777 Před 2 lety

      You are welcome

    • @ronbond3777
      @ronbond3777 Před 2 lety

      By the way did this solve your problem?

    • @DobraLLC
      @DobraLLC Před rokem

      I’m thinking of buying a S40 with a leak on the passenger side. I have an 04 Cadillac Escalade that had the same problem but the water came down the same area as yours and drains into the cowl under the windshield wipers. There was an access to the inside of the dashboard that was not sealed anymore due to age. I removed the plastic cover and caulked it. Never leaked again. My question to you is… does the water also drain from the lower corner of the widow into the cowl that catches the water from the windshield wiper area also? Or does it have its own tubing that goes down to the bottom of the car?

    • @ronbond3777
      @ronbond3777 Před rokem

      @@DobraLLC it has a tube running down out under the dash to the bottom of the car should be on your passenger side under. If you pour water in the area to drain you can see it draining under the vehicle

    • @DobraLLC
      @DobraLLC Před rokem

      Hello Ron, I did buy the S40 and found the problem. The water does not drain directly to the bottom of the car. In each corner of the dashboard there is a rubber tube that connects to a special grommet that drains the water into the cowl. Then the water drains from the cowl which also collects rain water near the windshield wipers and drains it to the bottom of the car. In my case, that special grommet was broken and the water was draining straight to the passenger floor. After fixing that with an extended piece of tubing and throwing the grommet away it was leaking into the head liner because the tubing near the sunroof was clogged with debris.

  • @vicblue05
    @vicblue05 Před 2 lety

    I have that same code I will replace this sensor thanks I also have the o2 sensor bank one do you know the location of it ?

    • @ronbond3777
      @ronbond3777 Před 2 lety

      One it located on your exhausted pipe itself

  • @zeshanahmad353
    @zeshanahmad353 Před 2 lety

    Thank you, I followed what you said and it solved my problem

    • @ronbond3777
      @ronbond3777 Před 2 lety

      Good. I am glad I was able to help you.

  • @laughingthrushmusic5269

    Do I need to disconnect battery before changing the sensor?

  • @samlarkin5909
    @samlarkin5909 Před 2 lety

    What about a frontier

    • @ronbond3777
      @ronbond3777 Před 2 lety

      Yes. It will also work on the Frontier

  • @johnscully771
    @johnscully771 Před 2 lety

    Replaced sensor car would not start put back existing one wouldn’t start but then removed neg battery cable put back on started. What did I do wrong

    • @ronbond3777
      @ronbond3777 Před 2 lety

      Did you disconnect battery before the repair? If you did the on board computer didn't recognize the repair/change and put it into a ( limp mode ) kind of deal. After you took off the negative connection and put it back on then it did reset the issue

  • @gerardorivera9947
    @gerardorivera9947 Před 2 lety

    It's like the 2nd time I've changed it in 6 years of owning my pathfinder

  • @ulysesperez3203
    @ulysesperez3203 Před 3 lety

    Did it turn on after you change it?

    • @ronbond3777
      @ronbond3777 Před 2 lety

      Absolutely. I had ZERO issue's after i changed it.

  • @dhiaalnasser8864
    @dhiaalnasser8864 Před 3 lety

    From Iraq 🇮🇶 Thanks for your information l have same problem in my nissan 2008 I will try to fix it by myself God bless you

  • @brucebuell7528
    @brucebuell7528 Před 3 lety

    What was the reservoir in the center that you said check it but didn’t mention what it was mine is dry.

    • @ronbond3777
      @ronbond3777 Před 3 lety

      Sorry I thought I did say what it was.. That is the power steering fluid reservoir.

    • @brucebuell7528
      @brucebuell7528 Před 3 lety

      Well that set off the crank shaft position reading

    • @ronbond3777
      @ronbond3777 Před 3 lety

      @@brucebuell7528 is your slip and VDF on? If so then yes.

    • @sjbagley756ify
      @sjbagley756ify Před rokem

      Also the part afterwards that you said to check if the engine is cooled off

  • @sigepbro95
    @sigepbro95 Před 3 lety

    Thanks for putting this out there. I have a FIXD to plug into my computer board and got the same code. It's good to see the exact make/model/year as I have to see where exactly it is located. I already replaced my camshaft sensors. This should finish the job. I heard that you need to replace both camshaft sensors typically when you replace the crankshaft senor, so that might be something to know before you start this job. I got the crankshaft sensor for about $25 and the two camshaft sensors were $75/$85 respectively. I got the parts at Autozone. I hope this helps others who are looking to do this repair themselves as well. Thanks for putting up this video. It's good to know where to look once I get the tire and fender skirt off.

    • @ronbond3777
      @ronbond3777 Před 2 lety

      Not a problem. I enjoy helping people. And if this video helps anyone then it was worth making the video. And feel free to shoot a message if there is anything else you all would like to see in a video of this vehicle

  • @nacho2131
    @nacho2131 Před 3 lety

    I have same problem bro. Thanks. I will try to change the sensor tomorrow

    • @ronbond3777
      @ronbond3777 Před 3 lety

      How did it end up working out?

    • @jjtovaldo
      @jjtovaldo Před 3 lety

      @@ronbond3777 the problem was fix it???

    • @ronbond3777
      @ronbond3777 Před 3 lety

      @@jjtovaldo yes if I did the video and posted it. It absolutely fixed it perfectly.. I was asking Nacho if the same fix worked for his vehicle. 90% of the time it's this issue. If it isn't the smaller issue's that I explained in the video 1st. Are you having this same issue and code?

    • @jjtovaldo
      @jjtovaldo Před 3 lety

      @@ronbond3777 yhea i have the same issues i replace 2 sensors are located back in the engine bay .. I was not expecting is a 3rd sensor located behind the plastic cover as you showed i Purchased a 2 crank shaft position sensor i guess is one moe

    • @jjtovaldo
      @jjtovaldo Před 3 lety

      @@ronbond3777 i will try to change the 3rd sensor. I hope they fix my issues

  • @williamstanley1095
    @williamstanley1095 Před 4 lety

    Enjoying the video’s! Did you ever see FollowSM[.]com!!? You should use it to promote your videos, it will help you grow your channel!!