How to make a Bucket Wheel/Hedgehog/hampster/small animal DIY

Today I will show you all how to make a Bucket wheel you will need 4. #6 32x3/4 machine bolts 4. #6 flat washers 4. #6 32 nuts 1. 1/4 swing nut 4. 1/4 nuts 2. 1/4x 1 &1/4 or upto 2" flat washers 1. 1/4x 3 &1/2 hex head bolt 1. 2gal Bucket cut from bottom edge 5 inches from bottom edge.
2 or 3. 3' x 1/2" pvc... optional 1. 3'x3/4" pvc 1. 3/4" PVC T.... 2. 1/2" to 3/4" adaptors for the T..
2. 1/2" PVC elbows.. Optional 1. 3/4"PVC Cap...
2 or 3.. 1/2" pvc Caps.
Also will need 1 Pully either single pulley or Clothesline Pully
Cut down 1/2" pvc will need 2. 10" pieces 2. 8" pieces. Or Optional 1. 10" piece for Base neck.
1. 3/4" PVC Cut 10" for Base neck..

[@Miss.Lechuza_Chusma]

I got lost with the pvc 😿 I was trying to write down what to buy . It looks really good 👍