Video

Came today from the dealer to fix that. Now I have a transmission failure message on the dashboard. Do any of u have the same problem after replace this?

This channel is fucking awesome dude I’ve had my 2013 for a very long time now thanks to you🎉

If there's no admin key? What to do?

I can't seem to get it to re-seat properly. I confirmed the two prongs are lined up and the front clip is in the slot of the white button but still doesn't want to slide in all the way. Any ideas what could be holding it up? Thanks.

A VERY IMPORTANT QUESTION WHEN YOU PUT THE WIPERS BACK DID YOU NOT TIGHTEN THE NUTS?? WHY DID YOU JUST THINK ABOUT IT..

But why can’t I remove the factory code I wanna remove that one

why 18.5, in stead of 17.5 ??? and what about 21.5???

I had a mirror falling off due to adhesive failure and for some reason the spring tab is missing. Is it crucial that I have one before reinstalling the mirror Or can I get away with just putting it back on the way it was?

very good instructional video

This came in handy during a detail I am doing on a 2016 ford escape. Has mechanical and cloth seats but with airbags. I am very grateful for you making this video! The only thing different for me was the bolts holding the glove box on were 10mm instead of 8. Also, the negative terminal on the battery took a 13mm to get it disconnected.

thank you for the video!

Thanks for this video I'm going through the same problem thought it was the transmission but it can't be cause I had the transmission fix 4 months ago .. Car would turn on running but I couldn't change gears reverse or Drive mode or anything gears slides like butter just stays in parking..so it can't be the transmission it's the Shifter Cable Bushing thanks for this video again bro

My car has 2 one on top and passenger side

Car needs to be level; make sure it is if using jack stands.

Here's a tip If you want to cancel my key settings and it wont let you. Are you using the master key or the spare key ? Master key works instantly. If you only have one key, then keep trying and good luck.

Thank you so much!!!!!!! 🙏🙏🙏

Do you have a video of installing a door latch rear diver side

Thank u. For show this

How many engine mounts are there in a 2013 Escape 2.0 ???

Thank you for a clear and easy to understand video. I have a 17 SE and upgrading the trim level to the black package. I wanted to know how to remove this fender trim and your video just explained it to me. Im basically doing a Chrome delete and blacking out some trim sections of the car.

Thank you so much for this video. Method two deff worked. Only a few dings in the nuts, but hey I got them off!

It’s crazy how the manual for the car doesn’t tell you AT ALL to do what this video instructs and the video before this one… makes no sense to me🤣

So the 4WD is always on then?

Finally! Every search I did for my front side marker bulb replacement kept turning up the bottom bulb like the fog light area. I typed in 168 to my search and bam quick easy to follow straight to the point video! Thanks!!

Great video thank you

I have a 2015 Ford fusion and I'm going to try this because I got my whole windshield replaced a couple months back and ever since the guy changed my windshield the wipers don't act right. The driver one is high like the start of your video and the right one overshoots every time I start the car and hits the driver side because it goes to fast.

Perfect clear advice. Hardest part is definitely those push clips!

I've been using one for about a month. Works very well, and capable of pretty precise adjustment as a secondary lift device for certain purposes. I do question the ultimate longevity of the rubber bladders, because rubber always eventually deteriorates. I keep it out of sunlight and I'll start giving it annual rubber treatments.

Thanks!

Thank you!

👍👍Great video

I got it done for free at Ford

THANK YOU!! Seemingly the same as everybody else in here, had my wipers acting up after a battery replacement (that was ALSO crazy) Your video is detailed, to the point and perfect for ‘step by step follow along’ DiY’ing. Thank thank thank you

Excellent! Thank You!

This is an amazing video and I probably would have had to take this to a shop if it didnt exist. I did fine with just a regular socket set. Took about an hour just from sweating and having to let my fingers rest from cramping up.

What if you don't have the factory code? I just got one used and it's not in the manual. And I only got 1key. So I can't do that trick to find your code

Can i install bigger tires than car recommend cause when I'm driving on the highway the speedometer show more speed than my phone's gps speed

Muchas gracias me fue muy útil no hablo inglés pero explicas tan bien que el idioma no fue un problema muchas gracia y éxitos

as someone who is literally just a girl, thank you.

You don't have to remove the wipers for battery access. I have changed the battery on my daughter's 2013 Escape twice and have never removed the wipers. People are making this more complicated than this needs to be. And since I have never removed the wipers I have never needed to calibrate them.

Easy instructions to follow and I was able to do this by myself one handed . 👍🏼👍🏼 Keep up these videos! I still have my 2015 Ford Escape 😊😊

So if I'm pulling assemblies from the junkyard, it seems like I could take a holesaw to the bumper cover and skip a lot of that fun.

Very helpful. I appreciate that and I have my lovely wife help me. Thanks.

The 2013 Ford Escape has got to be the worst designed vehicle I have ever had the displeasure of interacting with. Thanks for your vid.

Thank you so so much for the video. It helped a lot.

Thank you. I’m sure if I went to a car dealership or mechanic I would get reamed and they would do exactly this and charge me a butt load of money so thank you so much.

I have a 2016 ford escape se that has about 165,000 miles on it. I guess that's when the trans is set to explode? Anyway, when its cold, it seems to work. As it gets warmer, 1st gear doesn't want to click in right away. Moreover, there seems to be a mechanism that puts the throttle in idle. Any trans folks have any ideas?

Where do I get the fender vent?

Thanks for this