Video

Thank you it worked!

Recently got mine for a 2021 Chevrolet Colorado ZR2 off of Facebook Market place. $180 and 35 mins of my time and I am as happy as ever! I rarely score a WIN with FB Market Place but I consider this being one!

What is the reason you put battery on tender the night before you start it in the spring? A lot of times it starts for me if i dont even use a temder. Doesnt the alternator charge battery back up anyhow?

Shoot...I came here to see the proper way to start it, and you didn't even do it. Good info, but wasted my time fast forwarding to only see it in a trailer.

Thank you for this helpful video.

Thank you for sharing this video you just saved me a heap of money and time!!!

Life saver thank you sir !

Are you using sometime after truck city pass and throw the snow in front of the driveway and snow get super hard to remove??? If you try let me know if that work ok thanks in advance

There are memes about that ONE guy on the internet that posts that ONE video that saves your ONE problem in that ONE situation. This this that video and I am that guy with that problem. THANK YOU

Nice

It is a big deal by not putting a sign on it. You blew the motor up and had to replace it. Now it's not working like you want it to with a new Harbor Freight engine. Moral to the story. First check for engine oil!😂🙈😎

Can this device be used for determining the carburetor settings on a motorcycle in order to get the idle speed at 1400?

Thanks man! Life saver info….

Thank you

Thanks for the video! The instructions I got didn’t indicate (or I missed it) to go to the negative terminal for the wireless remote transponder.

I always wondered why people don’t unplug the connector first from the light while still in the housing so you can use one hand on that connector instead of pulling bulb out first, you’d have more leverage. Thanks for posting, you gave me information I didn’t have before. Great video Cheers!!

I too have a 2020 Colorado. Goes together pretty straight forward. I was curious where you mounted the electrical control box. Was it just left hanging in the engine compartment?

Perfect video, I have a ZR2, same frame fastening points but with metal skid plate underneath. I'll see what happens when I get underneath.

bro oh my goodness ur an actual life saver thank you so much u do not know how grateful i am for this damn video

did they do anything for your blade being marked up? just bought mine from costco on sale and put it together and it has some very deep scratches in the blade. I mean the metal has huge gouges out of it from being rubbed constantly. About 4 spots right in the middle. Curious if they did anything for you? My wireless winch controller also doesnt work unless i put the wireless controller touching the control box.

i have an older snowbear plow which is similar to what you have. new ones use that front receiver mount, mine uses a different bracket with two mounting points. used it on a couple vehicles, latest one being an 07 wrangler which i sold, keeping the plow but i also have a plow for my tractor which is what i currently use.

Thank you for this video! It will save me a lot of time as I work to get mine maintained and running. You're Awesome!

Do you think it REALLY cuts down on your total time out clearing the drive with a snowblower? I mean if you have to attach and then unattach that blade rig every time it snows (assuming this is also your commuter vehicle), then I don't know if this would be worth it. I have a 2021 Z71 that I bought this past year and was considering a light blade for it (live in the midwest, harsh winters, decent amount of snow) but I really don't need it for my house or my neighbors because I already blade with my John Deere select series lawn mower and it works great. I'd really want a blade to go blade out around town for my various friends and family members. I don't think I'm going to get one but was half curious if anyone had done any blading with their z71. I will say the thought of blading in a warm cab with my steering wheel and heated seats sounds so much nicer then being bundled up on the John Deere freezing my face off lol. Thanks for the video!

THANK YOU

Why rpms not steady? They going up and down

DIAGNOSTIC PRO TIP: Wrap 5 turns around a round metal bar 1/4" diameter, 1 inch long. Wrap that with duct tape to keep wire on the bar, and not unwinding like the Graz attempt. Zip tie it to a spark plug wire and start your engine. When done adjusting engine RPM, cut zip ties and move to the other cylinder, if necessary. You have just created an inductive bar. It steals the pulse from the plug wire, and applies it to your metal bar, where the device accurately detects and registers it. I cannot tell you the device is accurate, but you just removed a lot of the variables. -- The Great Nicolas Tesla revealed these secrets 100 years ago. -- North Central Florida -- 9.10.2023

3600 rpm is usually the redline for single cylinder lawnmower type engines.

This worked - thanks tons for this

Tip, buy a small batter clamp and solder the wire to the clamp. That way you can easily attach and remove the tacho on any engine.

Did you ever figure out why it wasent scarping the snow too good?

It was great to see someone install the front receiver hitch. Not many trucks have this -- good place to mount a winch for very occasional use. I am thinking of doing the same thing. Do you think it is possible to re-install the factory air dam using some surgery on the plastic part? The air dam improves mpg and cooling so I would like to have it back on.

For the money these are very good mowers and last along time if service regular 😊

I thought I'd give some feedback on mine I bought a year ago. I have 2003 Dodge Dakota extended cab 4x4 with 4.7 V8. I've owned it for years and it only has 100,000kms. Frame is mint and its been babied all its life except for my hunting trips. I ordered the Dakota kit for it and this exact plow. I was concerned I was too light as I have 1800 feet of gravel driveway. I've used my TYM 293 tractor for years with front blower and back blade. That thing is a beast. Heated cab etc. It'll take on any storm no problem. But I wanted something to do the quick hits with 6 inches or less for speed. I had 300lbs of salt bags centered over the back wheels and that made a HUGE Difference in steerability. Do it. I put a set of Timbrens on the front and that was huge!! The plow never affected the front height at all. I had to re-do the front end this spring but it's a 20 year old truck that needed it anyway. So next year it'll be fully ready. I have to say this thing worked perfectly except for the markers. Pure crap. I'll figure out something for those this summer. I didn't use the shoes as I don't use anything with my tractors either so I just went to ground. In 4x4 I used 2nd gear and simply drove to push snow I never went above 20kph - didn;t need to except for one slight hill I have to climb. These things work superbly if you accept what they are. I see alot of guys beat the living crap of these blades then complain. STOP! They are homesteader blades. Nothing more. 1800 feet of driveway 12 storms - never turned the tractor on once and had 4 storms of 2 feet or more. NO problem as I plowed with the storm going out in the middle of them and keeping it under a foot. For you property these things work great. I would have two things as spares though. The wireless control wiring kit and a an extra pulley motor. I see these as the most breakable on these plows. All in all they are steal imho when full plows in my area are 10K plus installed.

Oil sump capacity for Tecumseh HM70-80-100 8 HP engines is 26 oz.

Good blessings to you you saved my life❤❤❤❤❤❤

I am about to buy both headlights and the fog lights do they hold up well 2 years later?

Very helpful video. Thanks

THANK YOU. BECAUSE OF THIS VIDEO I CAN DRIVE MYSELF AND MY SON HOME! My wheel was in the exact same position when I removed my key and I was freaking out because I couldn't turn the wheel or key. I watched several other videos before yours that didn't work. Thank youuuuu!

Prolly homelite I found one at a construction job for free and it’s 1500 watts with a 5 hp Briggs & Stratton engine on it same color and a different frame

Can you adjust the angle from side to side on that plow? I have been wanting to pick one up but im interested in that before I do

I just put LEDs in low and high beams. I learned that they need to align vertically or beams of light will not be accurate. This is easy on the high beams as you can see then through the lens cover, not the low beams however. This is important for the lights to work well. Good video...thank you

Dude you save my day it actually worked thank you lots man

Thank you boss you saved my life, just know that.

Thanks dude! Just bought this truck and I was freaking out! Your method worked perfectly!

Bring the shoes up a bit ( clearance should be very little ) mark your driveway , it’s illegal to plow across a road in many areas so plan a spot to push your snow and hold or you’ll run out of space , a good spot is in the back yard but a straight push is definitely better also I start at the road working towards the house and if you want clean edges use your snowblower after plowing . Angle plowing is a bit more complicated, plan your pushes ! I removed my shoes because I have a concrete driveway and it cleans really nice without last but not least I only plow if there’s more then 2” ! I’m in Minnesota so we do get our share of the white flakes from hell ! Lol

What if you got push start

Thanks for sharing this saved me big time bucks!

You can put a hitch in the front ?

Thanks 😊 fixed the issue I was having with my 2020 Sierra

Hi, where do you buy your 2" receiver hitch? Does it come with the plow or you have to buy it separately?