![Tippy Travels - Winter Vanlife](/img/default-banner.jpg)
- 32
- 38 851
Tippy Travels - Winter Vanlife
Registrace 11. 12. 2020
Hello! Thanks for visiting our channel!
We're Coz & Meeks, we used to be workaholics and realised our 2 little girls were growing up too fast around us and decided to change our lives to enjoy as much time together as possible.
So we are self building a fully winterised camper to take us to the Arctic & the mountains for snowy adventures.
We are massive fans of winter and the extremes, we love to travel and explore, so we've bought a 2021 Fiat Ducato and this CZcams channel is where we hope to document the whole build and the adventures that follow!
We're Coz & Meeks, we used to be workaholics and realised our 2 little girls were growing up too fast around us and decided to change our lives to enjoy as much time together as possible.
So we are self building a fully winterised camper to take us to the Arctic & the mountains for snowy adventures.
We are massive fans of winter and the extremes, we love to travel and explore, so we've bought a 2021 Fiat Ducato and this CZcams channel is where we hope to document the whole build and the adventures that follow!
EP22 | Finishing the bulkhead | Ducato Boxer Relay Promaster | Vanlife | Van Conversion
In this video, we show the finishing of the bulkhead. Because of the difficulties in getting the services installed we had to leave the bulkhead and revisit once the cables and diesel heater feeds were installed.
This video is nice because it shows how much work went into building this insulated bulkhead and the finishing that it took.
Its essentially all 4mm ply, which I templated, scribed, detailed and finished to make it look like bendy wall tongue and groove planks.
-----------------
Links
-----------------
-----------------
Our Family
-----------------
We are Coz & Meeks, we are self building a 6 seater / 5 sleeper Arctic winterised van for us and our 2 little girls to build memories and happy lives. Our 2021 Fiat Ducato van conversion build series will be here for you all to watch, enjoy and hopefully help you for your own van build!
-----------------
Music
-----------------
Our great friends from FitsRoy were thrilled to let us use their music for the channel and we are ever grateful. You can see Jordan's latest music here:
open.spotify.com/artist/0szLJcCNIRYvqwLek9oOLv
-----------------
Our Partner
-----------------
Beyond Batteries is our family business, we are trying to build a greener world, one little off-grid set up at a time. If you need batteries for your van build or off-grid home, then click below or give us a shout, we love meeting van builders!
www.beyondbatteries.co.uk
#vanconversion #vanlife #vanbuild #wintervanlife #ducato #fiat #buildseries #builtnotbought #vanlifeuk #vanlifers #selfbuildcamper #vantour #vanlifediaries #van
This video is nice because it shows how much work went into building this insulated bulkhead and the finishing that it took.
Its essentially all 4mm ply, which I templated, scribed, detailed and finished to make it look like bendy wall tongue and groove planks.
-----------------
Links
-----------------
-----------------
Our Family
-----------------
We are Coz & Meeks, we are self building a 6 seater / 5 sleeper Arctic winterised van for us and our 2 little girls to build memories and happy lives. Our 2021 Fiat Ducato van conversion build series will be here for you all to watch, enjoy and hopefully help you for your own van build!
-----------------
Music
-----------------
Our great friends from FitsRoy were thrilled to let us use their music for the channel and we are ever grateful. You can see Jordan's latest music here:
open.spotify.com/artist/0szLJcCNIRYvqwLek9oOLv
-----------------
Our Partner
-----------------
Beyond Batteries is our family business, we are trying to build a greener world, one little off-grid set up at a time. If you need batteries for your van build or off-grid home, then click below or give us a shout, we love meeting van builders!
www.beyondbatteries.co.uk
#vanconversion #vanlife #vanbuild #wintervanlife #ducato #fiat #buildseries #builtnotbought #vanlifeuk #vanlifers #selfbuildcamper #vantour #vanlifediaries #van
zhlédnutí: 172
Video
EP21 | Part 4 | Making the Roof Rack! | Ducato Boxer Relay Promaster | Vanlife | Van Conversion
zhlédnutí 231Před měsícem
This is Part 4 of 4 of our custom roof rack build. In this episode we complete the roof rack, we cut and weld all of the framework for the roof rack. This Aluminium roof rack has been an epic amount of work totalling a month, but finally we have completed it!..... Almost.... This is the main frame work, the welding, the cleaning, grinding, sanding, surface preparation and painting. Unfortunatel...
EP20 | Part 3 | Making Roof Rack Brackets | Ducato Boxer Relay Promaster | Vanlife | Van Conversion
zhlédnutí 725Před 2 měsíci
This is Part 3 of 4 of our custom roof rack build. The Fiat Ducato, Ram Promaster, Peugeot Boxer and Citroen Relay all have the same roof mounts for a roof rack, but there is no straight forward universal bracket you can purchase to assist with a custom roof rack or rails. So in this video I show you how to make roof rack mounts for these vans. The approach is fairly fluid, just built some bits...
EP19 | CUSTOM BUILD ROOF RACK Part 2 | Learning to weld Aluminium! | Vanlife | Van Conversion
zhlédnutí 220Před 2 měsíci
This is Part 2 of 4 of our custom roof rack build. We are building this roof rack from aluminium, so in this episode you will see Coz learning to weld Aluminium! Plus lots of practicing Welding Aluminium is not the same as welding steel, a TIG welder is required and tonnes of practice. There are loads of CZcams channels dedicated to the pursuit of quality TIG welds. Follow the links below The A...
EP18 | CUSTOM BUILD ROOF RACK Part 1 | Wood Templating for Aluminium | Vanlife | Van Conversion
zhlédnutí 554Před 3 měsíci
This is Part 1 of 4 of our custom roof rack build. We are building this roof rack from aluminium, but to do this with as few mistakes as possible we are first making a wooden roof rack as a template. This episode shows the motions of getting the timber cut and shaped into the template, taking into consideration the solar panels, the Maxx Fan, the roof window etc.. This allowed us to see where t...
EP17 | We fitted a Vapour Barrier! Why wouldn't you? | Ducato - Boxer - Promaster | Vanlife | VanFam
zhlédnutí 681Před 3 měsíci
In this video you will see Coz installing the vapour barrier. This is a contentious issue on campervan groups on social media, so to explain the science behind this we would advise you to watch this video by @GregVirgoe. This explainer shows simply the effect of extreme temperature differentials with and without the vapour barrier. czcams.com/video/ommqMG7RjXg/video.html We used the bubble wrap...
EP16 | Back door Insulation + Cubby holes | Ducato - Boxer - Promaster | Vanlife | VanFam
zhlédnutí 483Před 3 měsíci
In this video you will see us working on the back door insulation, a tricky task as there are lots of obstacles. We also make a start on the cubby holes. First: We cut and stuck the 8mm foil foam insulation on to the metal work of the back doors, the same stuff that we have used in all our previous videos, we then stuffed the recycled bottle insulation into the nooks and crannies (never googled...
EP15 | Ceiling battens, Insulation & lighting cables | Ducato - Boxer - Promaster | Vanlife | VanFam
zhlédnutí 480Před 4 měsíci
In this video you will see us working on the ceiling battens to assist with a structure to fit the PIR / celotex insulation. This is a simple but also a nasty job, the insulation itself is horrible to breathe in or get in your eyes, as your working directly underneath it. Wear protective equipment! Meeks was able to get away from the office and give me a hand with this, which has been a godsend...
Chamrousse 2024 - Full Winter Campsite tour / Aire - Winterised Campervan and Motorhome skiing
zhlédnutí 419Před 4 měsíci
This is our 2024 tour of the Chamrousse campervan and motorhome camp site / park up / Aire du camping car. Chamrousse is a ski resort in French Alps, very close to the southern city of Grenoble. Living in the UK we are always on the hunt for easily accessible skiing areas, this is definitely one of them, it sits just 25 minutes from the main peage / toll road, which means its a fairly swift jou...
Serre Chevalier 2024 - Full tour of the Campsite / Aire - Winterised Campervan and Motorhome skiing
zhlédnutí 747Před 4 měsíci
This is our 2024 tour of the Serre Chevalier campervan and motorhome camp site / park up / Aire du camping car. Serre Chevalier is a ski resort in France, in the Alps, which forms part of the town of Briancon in the Provence Alpes Cote dAzur. We came here as it was on our "to do" list of ski resorts from way back before we embarked on our Van adventures, so what better way to explore than in Ti...
EP14 | Diesel heater installation 1st Fix | Eberspacher | Espar | Airtronic D2 | Vanlife | Vanbuild
zhlédnutí 655Před 5 měsíci
EP14 | Diesel heater installation 1st Fix | Eberspacher | Espar | Airtronic D2 | Vanlife | Vanbuild
EP13 | Got the Pro's in | Deadlock and Pro Plate Installation | Van Build series
zhlédnutí 503Před 5 měsíci
EP13 | Got the Pro's in | Deadlock and Pro Plate Installation | Van Build series
EP12 | MAXXFAN Installation | Fitting the roof window | Self build van conversion | Vanlife
zhlédnutí 349Před 5 měsíci
EP12 | MAXXFAN Installation | Fitting the roof window | Self build van conversion | Vanlife
EP11 | Building a Fully Insulated Bulkhead | Insulating the Cab | Self build van conversion
zhlédnutí 1,1KPřed 5 měsíci
EP11 | Building a Fully Insulated Bulkhead | Insulating the Cab | Self build van conversion
EP10 | Over Cab Storage box installation | Insulating the Cab | Self build van conversion
zhlédnutí 511Před 5 měsíci
EP10 | Over Cab Storage box installation | Insulating the Cab | Self build van conversion
Montgenevre 2024 - Full tour of the Campsite / Aire - Winterised Campervan and Motorhome skiing
zhlédnutí 1,7KPřed 5 měsíci
Montgenevre 2024 - Full tour of the Campsite / Aire - Winterised Campervan and Motorhome skiing
EP9 | Installing cable conduits and fluff insulation | Self build van conversion | Vanlife | VanFam
zhlédnutí 428Před rokem
EP9 | Installing cable conduits and fluff insulation | Self build van conversion | Vanlife | VanFam
EP8 | Where to fit all the services?! Layout update | Self build van conversion | Vanlife | VanFam
zhlédnutí 559Před rokem
EP8 | Where to fit all the services?! Layout update | Self build van conversion | Vanlife | VanFam
EP7 | PLYWOOD FLOOR INSTALLATION - NO SCREWS | Self build van conversion | Vanlife | VanLife Family
zhlédnutí 5KPřed rokem
EP7 | PLYWOOD FLOOR INSTALLATION - NO SCREWS | Self build van conversion | Vanlife | VanLife Family
EP6 | FLOOR INSULATION WITHOUT BATTENS! | Self build van conversion | Vanlife | VanLife Family
zhlédnutí 11KPřed rokem
EP6 | FLOOR INSULATION WITHOUT BATTENS! | Self build van conversion | Vanlife | VanLife Family
EP5 | WALL INSULATION | 3 layers of insulation on our van build | Vanlife | VanFam | Self Build
zhlédnutí 486Před rokem
EP5 | WALL INSULATION | 3 layers of insulation on our van build | Vanlife | VanFam | Self Build
EP4 | TIMBER! | We got a TREE and turned it into Van Build Interior | Vanlife | VanFam | Self Build
zhlédnutí 249Před rokem
EP4 | TIMBER! | We got a TREE and turned it into Van Build Interior | Vanlife | VanFam | Self Build
EP3 | 6 Seater Camper! | Installing rear seats to our van conversion | Vanlife | VanFam Self Build
zhlédnutí 2,8KPřed rokem
EP3 | 6 Seater Camper! | Installing rear seats to our van conversion | Vanlife | VanFam Self Build
EP2 | Too much Sound Deadening on our van conversion?! | Vanlife | Build Series | VanFam
zhlédnutí 462Před rokem
EP2 | Too much Sound Deadening on our van conversion?! | Vanlife | Build Series | VanFam
EP1 | We cheated - Fitting the van windows | Removing the bulkhead | Vanlife | Build Series | VanFam
zhlédnutí 496Před rokem
EP1 | We cheated - Fitting the van windows | Removing the bulkhead | Vanlife | Build Series | VanFam
WE BOUGHT A VAN! - Now let's build this winterised beast! | Vanlife | Build Series | Family Van
zhlédnutí 416Před rokem
WE BOUGHT A VAN! - Now let's build this winterised beast! | Vanlife | Build Series | Family Van
Dropping the kids to ski school - Winter Vanlife - Manigod 2019 - La Clusaz
zhlédnutí 98Před 3 lety
Dropping the kids to ski school - Winter Vanlife - Manigod 2019 - La Clusaz
Get the goggles on mate
Quite right. I do forget that often! Thanks
Bulkhead looking good
Thanks!!
I do like your human ( un slick style ) don't get too professional.
Thanks, it means a lot to us.
Nice. How much did it cost you with installation service?
😨 I can't remember! I think it was £450ish maybe? For 4x locks and the 2x pro plates. If I find the receipt I'll post an update 👍
@@tippy_travels That sounds affordable. Just watched other video, the guy paid £600 for 4 deadlocks only, but they came to his house for the fitting, so I think that was a good deal from Sussex Instalations. Thanks for replying😊
why did you make this so complicated. By filling the low points of the ribs you are preventing them to breath and dry. also why why did you fill those tie down points? they are the perfect way to secure your plywood subfloor
Thanks for commenting. Well we wanted a hermetically sealed floor space. So no moisture, no screws or screw holes, sealed with hybrid silicone, this way we don't want it to breathe. So filling the anchor points was an essential part of this as they would allow air and moisture into the sealed floor space. Filling the low points of the ribs was a way getting more insulation in, but mainly to even out the floor height and prevent point loading of the dense foam insulation. The insulation board is compressible on high points. In other words, to ensure the lifespan of the foam insulation, by spreading the load. Our glue down method isn't for everyone, it's just my choice.. But thought it a useful video for those who wanted to do it this way.
@@tippy_travels I understand why you fiiled the screw holes but you still could have used them to bolt down the floor. Looking back at your video I see that the Ecotherm does not seem to have very good compression strength that is why i am using XPS . You drive a car on that stuff
Ok. That sounds good. So our flooring has been in the van for 2 years and seems to be working successfully, no cracks in any adjoining panels or movements on the floor. I feel happy that it was the right approach for us. Good luck with your build!
That look s awesome
Cheers!
Fair play, that looks brilliant 🎉
Thanks!!!
Hi, great videos I have subscribed and will watch all your videos. Can I ask how many of the NasBoard did you need and would this EVERBUILD STIXALL COLOUR HYBRID SEALANT ADHESIVE C3 290ML CARTRIDGE be OK and how many did you Use? Keep up the good work. I have got the Citroen Relay Van which will have a full build. Thanks
Hi. I think I bought a 10 pack of nasboard. The sheets were 1200 x 600. Yes to the adhesive, I used about 20 tubes for the whole floor, so not cheap.. but I knew it would work, the van floor has been in for 2 years and is working as it should. Thanks for watching and subscribing, many more videos to come. 😁
Wow very wonderful
Thanks!!
Awesome job - Very informative as always, and some serious welding skills coming in considering you hadn’t picked up a TIG welder before this. High five ✋
Appreciated! 🙏
Hi Coz & Meeks, any news on dropping the fourth episode … I’m glued to the channel and feel I’m left on a season finale cliffhanger 😂 Excellent info by the way 👍👍
Hey, really sorry, it's coming, final bits being put together, our business is always really busy this time of year so we find ourselves prioritising that over vids. This week 👍
@@tippy_travels You don’t have to apologise ;) Thanks for the update - I’m just starting a FDL3H2 so soaking everything up like a sponge.
Amazing mate! I had this same idea in my mind, and was not easy to find this in youtube! Keep sharing content, your job is super great!
Thanks, yeah it's tough to find this stuff, more videos coming, thanks 🙏
Genius 🎉
As always, too kind 🤩
Hi, thanks for a great video. I would like to ask yo what are those metal bits on the floor showing at the top of the image at min 3:00, 3:51, 5:08 to 6:47 and you had to cut the insulation foam around them . they are kind of in front of the side door and that strengthens my belief that they look like they may be some mounts for some seats but not 100% sure. I would like to learn about how you got that done as that is of special intertest to me . I wanted to look at every episode but they are difficult to find so perhaps if you put the list of URLs for every episode, in the description that could help even dumber people, like me, to find all the episodes more easily :-)
Hi, thanks for commenting. Those metal parts are the floor mounts for the additional seats, which are featured in episode 3 "6 seater camper". Your suggestion is a nice idea, we'll look into that, although if you look at our "playlists" on our CZcams channel, all of the "Tippy Travels Van Build" episodes are listed there. Good luck with your build!
Enjoying your videos! I live in California but have been thinking of doing a ski/vantour of the Alps.
Thank you! Well I would love to tour California for both ski and the coast, it's high up on our list! You won't regret a trip to the Alps, we'll have many more ski van videos coming out later in the year. 😁
I recognise that carpark :)
I'd hope so after 13 years!
Beautiful if only someone would produce such a bracket , I’ve been gifted a rino rack and the brackets is my dilemma ☝️unfortunately I don’t have the tools to copy your design that and I think I would need them in steel to accommodate the weight of the rino rack , cool video keep up the good work 🙏
Thank you.. I sometimes take for granted my tool collection and workshop.. from memory, Rhino make brackets for this model of van, but they are powder coated steel, which obviously have a tendency to rust, but you could give them a clear coat before installing? An added layer of protection could work. 🤷♂️
Good on ya learning a new skill 💪
Love how tidy & organised your workshop is
Haha, upcoming video contradicts this kind statement!!!
Great video, thanks.
how are you finding the insulation in the van a year on and pretty much at the end of the ski season? Do you still stand by this method or are there any changes you would make if you were doing it all again? Embarking on my own build journey and looking at different methods :)
So far so good. The floor is still cold in winter time, but not freezing, however I think it's better than the thermal bridging effect of the wood
@@tippy_travels is there anything you would have done differently looking back on it now? I won't be fixing seats to the chassis. I do like the simplicity of just cutting the cellotex to the floor of the van rather than cutting into squares to fit in a wooden framework
I definitely wouldn't do it differently! If we had a high top van, I would possibly use slightly thicker celotex but the same method 👍
@@tippy_travels great thanks. reckon I'll do the same as it looks quicker and less thermal bridgey. Thanks for your help
Do you have a list of materials you used please? It would really help haha
Sure. 6mm (purple ply) for the cab side 25mm roofing battens 25mm celotex style insulation 50mm sticky back foil tape 4mm bendy (purple ply) for the living side. Assortment of screws! Clear sticks like sh*t I hope this helps!
I notice there is a lift going over the aire. not expecting pistes about but would it be possible (assuming you have alift pass already) to freeride to the lift at the start of the day and then freeride back to the aire at the end?
Hi, yes. You'll need to walk down past the petrol station to get to the snow which takes you to the lift. But the way home is pretty easy, you just peel off the blue run before you get to the aire and you can pretty much ride to the aire entrance. 👍
@@tippy_travels wicked, top info, thanks 😀
This is such a great idea. Almost like dovetails.
Thanks for the comments 🙏
Came here to see the biscuits but you never showed the biscuits
Apologies. Not good at this stuff...
👍👍
This is what I need to learn to do.
I love her laugh!
I know right! Filthy! Haha!
I really hope you've kept the dimensions and specs. Selling those plans is a must do!
Well we deviated slightly from the plan, but the core of it is the same. 😁
Vapour barrier, do or do not, there is no try IE either makes it 100% sealed or let it breathe, doing it half arsed is actually worse as you'll concentrate the condensation in localised areas 🤔 TBH I have allways just use sheets of polythene as a vapour barrier, it's what manufacturers use behind door panels, bubble stuff works fine but it's a waste of money as your paying for a foil layer that does nothing once it's covered over 👍 Still doing a great job though , very thorough 😎
I agree, all or nothing. The insulation is really what we were after, thanks for the comments, got some interesting vids coming soon 😁
@tippy_travels I always tackle condensation with ventilation, I have 3 roof vents, 2 powered 1 passive, air flow, air flow, air flow 👍 Look forward to the upcoming videos 👍
We used vapour barrier in our van too cos Greg Virgoe said we should 😊
He's pretty amazing, we followed the core of his van build principles, once we got to the nice bits we went rogue 🙈
I have a question, doesnt the celotex surface layer with alu tape form a vapor barrier? so all that would be needed would be the bare metal thats left? maybe 3mm closed cell foam? anyway, great job guys, and thanks for sharing the whole process! really appreciate it!
Yeah that was my logic too, I thought it wouldn't be necessary, but I had some celotex foil tape on the metal beam holding some cables in place and in hot weather i fell off, so I guess the foil tape would be the let down rather than the celotex. We sold it to ourselves as extra insulation as well as the vapour barrier. For the cost it seemed like a good investment, plus it only took a day to sort out.
@@tippy_travelsmakes sense!
very true about the vapor barrier.
Great idea having cubbyholes.
Making as much use of the space as possible!
thanks guys!
👊
Good work explain as needed Great vids & tunes Keep it up
Thanks for the kind feedback! More coming
Great idea to angle the battens 👍
You're always so kind, thanks again, it's nice to get such consistent positivity
Another great job I must admit I did like the blue lights makes it look spectacular. 👍👊👏👏👏
I think you've commented on the wrong vid maybe?! But we'll take it! It's nice to get nice feedback!
Hello from Sweden will follow your series as I myself am in the starting pit to start building our Fiat Ducato L2H2
Amazing! Well our van will come to Sweden some day!
@@tippy_travels u are more than welcome to Sweden. we live in the south.
Are you documenting your build anywhere that we can follow?
@@tippy_travels not at the moment, haven't started the build yet but don't think i will document it in video.
glad youre back!
Hols finished, back on video duty 🫡
traveling across the United States to stay in a walmart parking lot just like every other lot.
I know right
🥴🤣🤣Only in the USA
Well this was in France if you can believe that?!
What date this taken?
15th Feb 2024 around 4pm
oh wth. Looks awful like this in winter
Yeah.. it's not great, I hope the season isn't ruined for Morzine / Les gets
You have some interesting building ideas. But for gosh sakes, improve your camera techniques and narration. FAR too much camera movement - pull back a bit and stop swinging back and forth. Use a stabilizer or a tripod. You have many minutes of pointless words. Use a script if you have to. Edit out more. You have great material, but it's almost unwatchable because of the low production values.
Yeah, I take your point, heavily. I filmed this stuff years ago, I used a phone. I'm really not good at this stuff, I'm not good at scripting, timing, editing and I completely agree with all of your points. I would like to believe that I'll get better at all of the above. Please accept my apologies.
hey! great build, im wondering if you have footgae of the rest of the build? even some stills would be great! cheers man :) hope you both hasd a great time skiing!
Hi. Yes! We shot the whole build, but we've just not had time to make all the vids, we're back now so will start on the next few 👍👍
Beautiful scenery
Thanks for the tip on the foam board cutter -
Great video 🙂👍 loads of information 😁 you didn't show the black waste disposal or fill up and grey waste? I assume they have it? Is the €25 including unlimited electricity? Thanks again 😁
Apologies 🤦🏻♂️, totally missed that section. Opposite the campers is the water point, grey water disposal, black water / cassette waste is in the toilets of the shower area
Great stuff 👍 Are you heading out again to do some more reviews this year? I know the snow has been a bit dodgy for the last few weeks...
Yes we're in Valmorel right now, then Meribel and La Clusaz. We've got footage for Alpe d'Huez, Les 2 Alpes, la Chappelle d'abondance, morzine and Les gets coming soon. Just finding the editing taking some time..
Anything you need to know about those resorts please ping us a message
Great information…thanks for sharing!!!