Tamiya "Rising Fighter" is it the last rigid axle buggy? 못생겼지만 잘달리는 타미야 저가형 입문용 버기 라이징파이터
Vložit
- čas přidán 9. 07. 2024
- 00:00 Opening
00:47 As-Is Quick Review
02:27 New Stardust Wheel and Tires
02:38 Install Shorter CVA Shock
02:54 Install Custom Body Mount to use Body Clips
03:35 Off-Road Test Run
타미야 라이징파이터를 아시나요? 2008년에 출시된 타미야의 어나더 입문용 버기입니다. 아마도 타미야에서 출시된 마지막 리지드 액슬 차량 같은데요? 메인 샤시는 그래스호퍼2를 그대로 사용하고, 기어박스는 DT01 리지드 액슬을 붙였습니다. 이 두개의 전혀 다른 차체의 조합이 그렇게 썩 조화롭지는 못해요. 그닥 인기없는 차량이라고 생각하고, 특히 80년대 어린시절에 그래스호퍼나 호넷 같은 실차감 넘치는 멋진 차량으로 알씨를 입문한 저희 세대에게는 어디서 이런...이란 느낌인 차량이죠. 특히나 이녀석의 리어 서스펜션은 주행은 어떤지 모르겠으나, 너무너무 껑충한게 영 자세가 별루입니다. 일괄 중고거래를 하다가 정신차리고 보니 이녀석이 제 품에 와 있더라구요!
그동안은 전혀 관심을 줄 생각이 없던 녀석이지만 그래도 관심을 갖고 보니 몰랐던 새로운 것들도 알게되고, 나름 타미야의 고민도 느껴졌습니다. 타미야에서는 DT01이라는 희안한(?) 샤시를 만들어 놓고 이녀석을 충분히 재탕하지 못해 뽕을 못 뽑다 보니...이런 희안한 차량까지 만들게 된게 아닌가 하는 제 추측 입니다^^
어쨌거나! 진열을 하든 주행을 하든 도저히 저 껑충함은 참아 주기 어렵습니다. 이걸 완전히 제대로 고치게 되면 다시 업데이트 하겠습니다만 오늘은 일단 짧은 쇽으로 교체해서 그나마 약간 보기에 괜찮아 진 것 같기도 합니다(아니면 오래 보다보니 뇌이징이 된 것 같기도 하구요)^^
Tamiya Rising Fighter, I thought it would be my last tamiya buggy to buy, all is OK but it's rear posture with very high suspension making the car looks too tall was just not my preference.
However during a bulk used car trade, a heavily used Rising Fighter came to me! This one was in very good shape however the previous owner seemed to run this car in track.
I think this GH2 chassis + DT01 gearbox mix isn't the best match, however I need to see how it runs in my own eyes!
#tamiya #risingfighter #rigid #axle #rcbuggy #버기카 #그래스호퍼 #호넷 #증손자뻘 #타미야 #라이징파이터 - Zábava
Enjoyed your running footage! Nice work! Cool RC! It's the Grasshopper on steroids!
many thanks!!!
Nice run and footage, buddy! I really like Rising Fighter as well. Good luck with your journey with the car!!
thank you Masa san! I have just sent a email regarding the trailing arm conversion kit file. Please check and let me know the progress on your 3d printing journey. Thank you always!
@@HumbleVintageRC awesome!! I’ve started using my 3D printer. Thank you for the data, much appreciated 🙇🏻 I’m so excited to print those parts out!!
cool rc,review and run
many thanks!!!
좋은 영상 잘 봤습니다 😍👍
찾아주셔서 감사합니다!!!
개조된 바디 장착 방법 아이디어가 멋집니다.
thank you bro!!!
리어가 부드러워지니 확실히 튀는게 좀 덜하네요!😊
ㅎㅎ 저녀석 워낙 껑충해서 그래도 잘 굴러가서 다행!
I wish I had this dt01 version United States that goes for under a hundred performs better than people expect .
yes they do perform good!
Haven’t got mine built yet but I got a set of white cva shocks for it.
Ps……appreciate the English subtitles 😊
Ppd….. I’m thinking of spraying the body and wing chrome, what do you think about that 😮
Thank you for the comment! Chrome would be cool, I am thinking of going for black and do a hornet look!^^ good luck on your rising fighter project!
The fighting buggy had a longer wheelbase.
well I will have check out fighting buggy someday! thanks!
It is the last of the dt01s to be made because the mad bull is being discontinued. What a pitty.
they will come back some day, doesn't it?^^
바디 고정방식이 참 이상적이네요, 실례가되지 않는다면 바디 고정부속 3d파일 공유를 요청드려도 괜찮을까요?
아 제가 요새 너무 바빠서 파일 업로드하는걸 깜박했네요 ㅠㅠ 주말에 올리고 알려드릴께요~~
감사합니다. ^^ 언제나 응원드립니다.