JP CNC ALL METAL HIGH END QUALITY 120mm EDF 14S Testing video 1
Vložit
- čas přidán 30. 08. 2016
- JP High performance EDF.
Totally weight is 698g of JP 120mm EDF at 14S.
Recommended ESC: Hifei 14S / 160A or Hifei 14S / 200A ESC
All the EDF are adopting advanced aluminum alloy and made by High precision CNC machines.
Each blades and motor are have advanced Balance. Running very smooth,you don't need to do any balance again. - Věda a technologie
what power supply are you using and where can I get one please?
The 90mm/12s fan is performing very well. We are preparing a series of videos that use your fans in hybrid jet engines. I want to be accurate when describing the specs on these engines. The fans are rated to at least 75k RPM and possibly to 82k RPM, but based on the motor kv and your video demonstrations it would seem that the operational RPM would be somewhat less than 50k RPM. Can you clarify this?
Could share me how you get the RPM? Are you get them from RPM testing machine? or get from calculate?
Calculation, based on the motor kv and applied voltage. We will be running these as compressor stages in a hybrid turbojet.
Shane, about a month ago you posted that your highest power fan was an 18s, 120mm diameter fan with a continuous power consumption of 8,700W. Falcon Hobby does not carry this fan and we need it for a series of turbojet videos on our CZcams channel. Can you email us about a source? techingredients@gmail.com
I also would like to purchase a 120mm or biggger any suggestions where to buy?
www.falconhobbysupply.com/airplanes/jp-hobby/
Can you confirm that the 160mm fan is still available, the US source is out of stock? Can you also give a maximum continuous output? Your demonstrations of these engines are limited to several seconds at peak output.
Hi ! I am Shane, The 160mm EDF is not available now. We have similar output data of 120mm EDF with 18S. Here is the information: 18S / 78.3V / 123A / 10.8kg Thrust. Power : 9630.9W
Thank you. Is this a continuous power capability?
How long of time you want the Fan running at the data please? My experience is here the continuous power is depend on quality of your Lipo battery. So the good quality Lipo battery is more power and the power is stabilization. But the bad quality Lipo battery would make the fan lose power.
I understand fully what my power supply limitations are. I am asking only about the fan and it's motor. What is the maximum continuous power that the motor can be operated at without overheating?
This is the best continuous data: 18S / 75.6V / 116A / 10.3kg Thrust. Power : 8769.6W
Great video!
Do you know if the 160 mm 14s model is still available and what the max. thrust on that type is?
Thanks
JP 160mm 14S is available. the max thrust up to 11kg with 130A
Thank you so much for your videos. Do you know where I can purchase the 160mm? Do you have any videos of the 160mm? Will they be making a larger edf or is 160 the largest with most thrust?
If I calculated good this is 2300 KV Per minute ( RPM/V) motor. Right ?
The KV is 673KV is the right KV of the motor.
nice
I have the jp 120mm EDF at 12s (combo)..it is stil possible to run it with 14s battery. it is the same mottor ?? or the mottors are different?
Hi Martin, the 12S motor is not able to run at 14S battery. they has different motor(different KV).
Hi Shane ..In Falcon Hobby site both fans 12s and 14s (120mm) have the same motor JP 5050 760 KV 12 Pole.Can you confirm this. You tell has differnt??
@@martinkomel4219 The JP 5060 760kv 12 pole is 12S motor, The JP 5060 673KV 12 pole is 14S motor.
cooooool
Hi there,
I would like to buy the same setup as your. Is it possible ? Thanks
www.falconhobbysupply.com/jp-hobby-jphedf12014s-high-thrust-120mm-edf-with-1.html