Woodturning | Maple Burl Box Niles Bronze Threaded Inserts
Vložit
- čas přidán 12. 01. 2023
- In this video I turned a Maple burl lidded box and used the Niles bronze threaded inserts to secure the lid.
Tools I used in this video.
Robust lathe if you have any questions jacobson68@yahoo.com
Easy Wood chuck www.easywoodtools.com/
Easy Wood #1 hollower www.easywoodtools.com/
Easy Wood Rougher www.easywoodtools.com/
Spindle Gouge thompsonlathetools.com/
Bronze Rings nilesbottlestoppers.com/
Doctors Walnut oil nilesbottlestoppers.com/
Sandpaper amzn.to/39xGeV1
1/8" Beading tool d-waytools.com/
Wire Burner nilesbottlestoppers.com/
YOU CAN ALSO FIND ME:
= www.etsy.com/shop/Thewoodshoptv
= www.thewoodshop.tv/
= thewoodshop...
= / thewoodshoptv
Robust Lathe Dealer- jacobson68@yahoo.com
THANK YOU FOR SUPPORTING MY SPONSORS!
Easy Wood Tools- www.easywoodtools.com/
Woodcraft: www.woodcraft.com/
Carolina Shoe: www.carolinashoe.com/
Niles Bottle Stoppers nilesbottlestoppers.com/
#woodturning #turning #liddedbox #carljacobson - Jak na to + styl
In this video I used the Niles threaded rings to make a lidded box nilesbottlestoppers.com/product/threaded-rings-for-urns/
Thank you for sharing this awesome project with us. Everyone stay safe, happy and healthy. From Henrico County Virginia
Thank you so much Norm!! Take care
I always watch your channel to relax with my pup. I love your craft!
Thank you so much! 😊
Very thoughtful of your Aunt to gift you that tabletop! And, what a great reuse idea!
Thank you Erin! My Aunt is a sweetheart!
What is that surface that you used to mix the epoxy and then oil the piece? Did the unused epoxy come off the surface? Thanks for your videos!
That turned out awesome you got the best and in the world
Thank you James!! Yes she's a keeper :)
Another beaut! Very nice box brother! That yard sale maple is suhweeeet!
Thank you brother! You can't beat yard sale season!
Enjoyed the video, will have to some threaded inserts for my projects.
Thank you so much Jerry!! They really do give it a nice touch of class, especially if you're making Urns.
Carl don't beat yourself up over the lid, it turned out nice. I would use the extra rings to remount and finish on the lathe, just a thought. Thanks again for showing us your amazing work.
Thank you so much Mike! I'm not sure if you watched the end of the video, but that's what I did. I remounted the lid, and brought it down a bit. It looks so much better now.
Nice wood...Nice detail...Nice ring system
Thank you so much!!
Always love seeing repurposed wood being turned into something beautiful. And as always, I seem to learn something new from every one of your videos. Thank you!
Thank you very much Johnny!! I really appreciate that!
Beautiful box Carl . Have a great weekend take care .
Thank you buddy!! Have a good one and take care.
Turned out real pretty, Carl. So much character in that wood. 💗
Thank you so much Kris!! My Aunt is the best! ❤
I enjoy watching you talking through your design process. Thanks for sharing.
Thank you so much Jim!!
Beautiful burl. The threads look great. Those should really help the urn folks. The lid is MUCH better. Thanks for sharing.
Thank you so much Doug!
Fantastic project, Carl. As soon as I saw those rings in your lineup I immediately thought about how easy they'd make it to remount or even just to finish the bottom. I enjoyed the long form video, too. Good call on bringing down the lid.
Thank you Jay!! They really do make it easy to remount if you need to, or just simply finishing them off.
beautiful recycling, love the threaded rings, Thanks Carl.
Thanks buddy!!
Terrific wood turning as always Carl! That box turned out great! 👍👍
Thank you so much Steve!!
Beautiful box, Carl. The threaded inserts are really cool. Thanks for the video. 😊😊😊
Thank you so much!!
thanks. See you there.
Awesome box Carl. Love maple burl. Those threaded inserts are great.
Thank you so much!!
Gorgeous ! Love your work !
Thank you so much!!
I’m a newbie to all of this stuff. And I have to say that your work is absolutely fantastic.
Thank you so much Keith! I hope you're having fun turning!
That's a masterful looking job you've achieved. Great finish. Love it.
Thank you so much!!
Beautiful box! Really love those inserts, too!
Thank you buddy!!
Love, love, love the box and, especially that it is a burl!
Thank you so much!!
Beautiful job Carl ! I enjoyed watching your video. Thankyou.
Thank you very much Don!
Beautiful woodwork, just stunning!
Thank you very much!
Carl I hope you made your aunt a very nice present from some of the wood from that table top she brought you. Also a very nice video of making a nice little lidded box, even if it was a video advertisement for your new threaded ring sets. Well it worked, when I get my fun money allowance I’ll be ordering some. Cheers, Tom
Thank you very much Tom!! :) We gave her a bowl for Christmas.
So nice to talk to you on the phone Carl! Thanks for letting me know about the back-order! Say hi to Robin for me!
It was nice talking to you too! We'll get them out next week. Robin say's hi :)
beautiful work! great save on the lid, i was thinking the same thing 😅 that wood is stunning, props to your aunt for snagging that for you.
Thank you very much!
Hi Carl, I received my brass threaded inserts. They are high quality and are going to work out perfect! Thank you!
I'm glad it made it safe. If you have any questions just let me know.
Absolutely lovely box Mr Carl! 😃
Thank you so much!!
Nice job, that looks great
Thank you very much Vern!!
I love it sir. Thank you for sharing. I wish with all my heart I had a good lathe like yours. One love to all!!!
Thank you very much! I started with a washer motor with a faceplate, and worked my way up :)
Those rings make me want to turn an urn! Real nice job, Carl! 😊
Phil
Thank you so much Phil!!
That Looks great. Nice work Carl. Those inserts look great
Thank you John!!
Nice work as always Carl! Kudos! I really liked the story with the origin of the teo pieces...
Thank you very much Alex!!
Very good
Thank you!!
Beautiful lidded box Carl and I love the threaded insert.
Take care Carl.
Cheers, Huw
Thank you Huw
Take care,
Carl
Great video Carl. I stuck with you.
:) Thank you very much!!
gorgeous!!!!! i will have to make more lids!!
Thank you! They're a lot of fun to make.
great work
Thank you so much!
благодарю за науку.....классный патрон)))
Very interesting, thank you sir.
Thank you Allan!
HI CARL BEAUTIFULL as u normaly do. weldone. wood burl is a beauty.
Thank you so much!!
Loved the video. I am looking for creative approaches to boxes and the steps various turners use to make them. Even though it was on the long side I appreciated the pace of the video. I am new to wood turning and some videos go so fast I have trouble keeping up. I also appreciate the list of tools you included. Very helpful.
Some videos just show someone making a piece, others tell us what they are doing , why , what tools etc . As learner's we find these more interesting. Carl's are very good , there is also a channel called turn a wood bowl . His main purpose is instruction
Thank you so much!! We really appreciate that! Glad you enjoyed the video.
Good job
Thank you!!
Nice
Thank you!
l welled like this box good job
Thank you Delbert!
Very neat, much smarter than typical thread chasing, for the warping doesn't tighten it at all.
Thank you!! I think it's a great alternative to chasing threads. When done right, hand chasing can be awesome. Sam Angelo does a great job at it.
Thanks you two, i really like that, it turned out lovely….so sorry for late comment but at this time we are load shedding which means 4 hours at a time with no electricity, no signal and no wifi too. Its really awful, fours hours off, four hours on, ten hours a day…..take care you guys, see you soon
Thank you Val! Oh man that sucks, I hope it gets better soon! See you at the Oregon symposium :)
Beautiful repurposed wood project. Q: If you want to align the grain of the lid to the base can you screw on the brass lid fitting to the base, apply the epoxy, then push the lid to the position matching the grain? There’s the risk of too much epoxy but could you put a minimal amount on then once dried supplement with CA for strength?
Thank you very much!! You absolutely can do that. We just finished an Urn and did exactly what you're talking about. I didn't use the CA, just epoxy though. I should of mention that in the video!
Очень интересная и красивая работа ❗️🔥..Подписка и лайк👍👍👍
Спасибо! Мы очень ценим это!
That wood really has great figure. That must have been a massive piece of furniture to provide blanks that size. Those rings really seem like a great solution to making threaded boxes if one does not have, as Mike Peace calls it, "uranium enriched wood" that lets one chase thread in it. A couple questions: 1) If one over-achieves in making the recess for the insert, how much margin does one have with the epoxy? 2) When hand chasing threads, the top and bottom piece can be made to line up in grain or figure by trimming the piece until the figure lines up when the box is closed. What is the recommended way to to that with these rings?
Really enjoyed watching this; saw that you had added those rings and now plan to get some the next time I place an order.
Thank you Mark! The epoxy is pretty thick, so you have a good margin to play with. I would just go slow and take your time. As far as lining up the grain, it's pretty easy. Just put the epoxy on both sides (being careful not to get it on the exposed parts) and simply thread the lid on until the grain lines up. I did an Urn a few weeks ago and lined the grain up on it, and it worked great.
@@CarlJacobson Thanks!
Really enjoyed the video. What is the source of the brass threaded inserts? Beautiful work.
Thank you very much Rodney! We bought Niles bottle Stoppers, and now have these Bronze inserts for sale on the website. Here's the link, nilesbottlestoppers.com/product-category/threaded-inserts/
Carl, nice work. When are you coming to visit us again in Salem. Where did you get the brass inserts?
Thank you!! We'll be back down that way for the symposium in March. We bought Niles Bottle Stoppers, and we'll have a booth there. Really looking forward to it! Here's a link, we have them on the Niles website for sale. nilesbottlestoppers.com/product-category/threaded-inserts/
beautiful lidded box you always do great work and Carl where do you get those brass threaded rings if you don't mind me asking
Thank you very much! Here's the link for the inserts nilesbottlestoppers.com/product/threaded-inserts-for-urns/
Beautiful work,love it!,what is the name of the chuck you have,I like the easy change of the jaws
Thank you very much!! It's the Easy Wood chuck, here's the link www.easywoodtools.com/easy-chuck-1
Did you try a forstner bit?
Beautiful lidded box! I was interested in the bronze rings and went to the Niles website and there is a picture of the rings, but no other mention of how to order, price etc.
Hi Howard, I think you just whet to the home page. There is a Shop tap at the top it will take you to the threaded rings page with the prices.
Beautiful piece. Great video. I have been asked to make an urn for a friend. This video will help alot. What size rings would you suggest for the opening? I think my friend was about 160 lbs so I'm not really sure what size urn to make.
I'm sorry for your loss!
I would go with the 3 1/2" Most funeral homes want the opening fairly large. Here's a link to those, nilesbottlestoppers.com/product/threaded-inserts-for-urns/
Sam Angelo has some great videos on turning Urns and how to calculate the cubic inches they need to be.
Carl, that burl turned out beautiful and these bras insert are really cool. Is there somewhere in the UK that these can be purchased from ??. Great job
Thank you very much Alan!! We don't have a retailer in the the UK right now, but we're sending a box over there for a friend later this week. If you email me your number we can take your order over the phone and ship it together. jacobson68@yahoo.com
Nice video. What is the piece with the mandrel that fit into the headstock that was used before the chuck. I have never seen this particular
piece of equipment.
Thank you Cindy!! It's a spur center. You use it for spindle turning in-between centers.
Really enjoyed watching Carl, what make of chuck do you use
Alan
Thank you Alan! It's a Easy Wood Chuck
@@CarlJacobsonkeep up the good work Carl me and my wife really enjoy watching you here in England 👍
What type of chuck are you using. Great work on box
Thank you Eugene! It's an Easy Wood Tools chuck. It's a game changer! Here's the link, www.easywoodtools.com/easy-chuck-1
Hi great job on your Box I was wondering about the metal inserts I wondering where I could buy some.
Hi Ray, sorry for the late reply. Thank you, we have them on the Niles website.
nilesbottlestoppers.com/product/threaded-inserts-for-urns/
@Carl Jacobson thanks for the info I know your busy so I just bid my time and hoped you would get around to it. And you did thank you I appreciate that.
Where can I find the brass Ring 😊 good job i like the bowl 😊
Thank you Randy! Here's the link, nilesbottlestoppers.com/product-category/threaded-inserts/
I want to know what kind of chuck you’re using that pops out and changes over so easily?
Hey Dennis, It's the Easy Wood Tools Chuck. Here's the link, www.easywoodtools.com/easy-chuck-1
Very beautiful as always ❤. The jaws on the chuck are numbered right? You change them so fast it doesn’t look like you are checking them 😳🤪
Thanks Rick! No need for them to be numbered. They're interchangeable and can go in any slot. It really is a great chuck!
@@CarlJacobson oh ok I just know the nova’s are numbered
Hi Carl we’re do you bye brass insert from as I am in the uk thanks dave
Hey Dave! We sell them on the nilesbottlestoppers.com website, and yes we ship to the UK
Hi........ where do I buy these treaded rings ?
Sounds interesting.
Let me know please
Hi Robert, here's link nilesbottlestoppers.com/product-category/threaded-inserts/
Great. Thanx
Where can I fund the threaded brass inserts
We have them on the Niles website nilesbottlestoppers.com/product-category/threaded-inserts/
Where can I buy those brass rings
Here's the link nilesbottlestoppers.com/product/threaded-inserts-for-urns/
Where can but the métal ring to screw ? Thanks !
buy
Hey Daniel, Here's a link to our website, nilesbottlestoppers.com/product-category/threaded-inserts/