Branches Chunker - Wood Terminator
Vložit
- čas přidán 19. 04. 2022
- The wood chipper is a very useful tool, especially now when firewood prices are constantly rising.
In this video, we decided to make a two-shaft chipper that can also cut branches that are too thick to the right size.
The maximum diameter of the branches is about 7-8 cm, but thanks to the cutting blades, we can cut wood with a diameter of up to 15 cm in half and quarters.
The tractor has a power of 18 HP
The flywheel weighs approximately 15 kg
The structure of the mechanism is made of 8 mm sheet metal and 200 mm C-channel.
Amazingly done. Safety tip: Never stand in front of a wood chipper, you can be pulled in, always stand to the side. Be safe!
Maybe I want to be pulled in? You don’t know me.
@@slaphappyduplenty2436 Perhaps you live in Fargo?
@@thedevilsadvocate3710 Should have made it bigger if you wanted to pulled in. Hope you have a huge insurance policy for your family.
You can stand infront of a wood chipper just don't put your hand all the way in and preferably don't wear a hoodie or anything long sleeve.
@@thedevilsadvocate3710 Freakin' Steve Buscemi, man...
This just shows that of all the elements of brilliant machine shop operation (tools, materials, etc.), brainpower and experience are the most important. What a joy to see him work!
I like the way that you cut your keyways into shafts. It's simple and effective.
I’ve never seen it like this! Very cool, and for sure dead center in the shaft!
Высокая станина-большая нагрузка на кардан.
and deadly
Nice build! This wood chipper needs an emergency-stop button though. If your hand is somehow stuck, you don't have any chance to stop the machine.
yes, safety is a horror....
And that hand will just… cease to be on your body
Safety 3rd
How do you know he doesn't have/want one?
No offense, jw
Only way for this to happen is to install mechanical clutch
This machine is literally an addon to your tractor's power shaft.
That was amazing. Reminded of my grandfather. He had those kind of skills too. Full watch.
I have to admit that I was skeptical about this build but it really turned out great!!! Now that’s a chipper!!!
Exactly. I thought the key wasn't going to hold.
Great angles! Love the fact that he gets straight to the point
When chainsaw just dont deliver enough horsepower for a project this man takes a tractor. Great build!
I love your builds, clearly very well thought out 👌👌🔥🔥
Szacunek. Uwielbiam patrzeć jak wykonujesz te urządzenia.
Wszystko przemyślane, dopasowane, idealnie współpracuje. Maszyny wyglądają jak produkowane seryjnie. Chylę czoła. 👍👏 Lubelskie pozdrawia.🇵🇱
Привет всем!
Бесконечно можно смотреть как течёт вода, горит огонь и работает человек!
Браво мастер!
Я от Вас в восторге! У Вас золотые руки!
Sprzęt pierwsza klasa. Brawo Ty 😎
Super, kolejny projekt pierwsza klasa, już czekam na kolejne. Pozdrawiam
Man I don’t even need this but now I want it! Awesome build!
As a welder and machinist I can say this is pro work. Not as simple as he makes it look.
I've never been so happy to see guards put on something, that's some excellent fab work 👏
Как всегда великолепно! Просто золотые руки👏👏👍
Super robota. Dodatkowy plus za ujęcia i montaż 👍
Very nice work !! This will be handy for a small wood stove owner or to make kindling either way GREAT job building it !! Getting that balanced and everything is time consuming not to mention the time building it !! 👍👍
Elegancka rozdrabniarka, dzięki za pokazanie.
Pozdrawiam serdecznie
Great job. I have had to shred branches with an 8-blade shredder and a 4-blade shredder. I was very happy with the 8-blade shredder, the short pieces fit perfectly in the bag, even the thin branches, which I wouldn’t say about the two-blade shredder, were very disappointed with it. The branches fall, cross and the bag fills half empty.
This looks like it would be really good for making smoking wood
Awesome engineering! Gotta love the mind and skillset of a farm boy. Thanks for the entertaining video.
Farm boy? More like a lost machinist
Awesome watch! Very soothing to relax to and just listen to the sounds without talking!! Highly recommended if you want to lay back and put something on to wind down to !!!
Hut ab mein Herr!!! Sie sind Ingenieur, perfekter Handwerker und Künstler in einer Person! Große Klasse!!!👍👍👍👍👍
Niesamowita praca, niesamowity pomysł... brawo Ty...
That is a really extreme angle on that PTO shaft... if you start wearing out the u joints, i'd look into lowering the stand on the chipper so the angle isnt so severe.
came here to say this.
Wonderful work ! So much talent made in Poland!!
Very nice job great to seeing the use of the shear pin
Wouldn’t want any of the innards of all that hardened steel going flying everywhere
Very nicely designed and built. It would make short work of cook stove wood, and kindling. You might need some shaft end bearing support on the little splitter, sooner, or later, but that was neat.
Super jak zawsze! Przydałby się taki rębak do gałęzi 😍
This is zombie apocalypse grade machinery... Great Job
The editing and production value is amazing!
THAT IS AMAZING!!!!!!!
I wasn't sure what the splitter blades were going to end up being until the very end when sheet steel around it..... I thought it would be for removing branches maybe, but that just didn't make sense.... I think maybe you need to add one more piece on each side of the blade to pull the tree ALL the way through since I see how some of them need to be pulled all the way out.... but I KNOW you can handle ANYTHING that needs fixing!!1 YOU ARE AWESOME AND I LOVE THIS CHANNEL!!!
This makes me proud to have Polish ancestors! :D
was thinking similar, some sort of driven rubber wheels in front would probably make it easier to use AND safer as it SHOULD slow/stop any kick back that might occur
This man does not know the meaning of the word "subtle" and i love it.
That machine will last longer than planet earth 🌍. Wow great job buddy.
Great work on the guarding as well.
Maszyna pierwsza klasa. Solidna i mocna, jak wszystko co wykonałeś. Aż mam kompleksy jak patrzę na Twoją kreatywność i zaradność : )
Dlaczego masz kompleksy? Po prostu to jest nasz mistrz i uczymy się od niego. Za 5 lat też będziesz mistrzem, jeśli będziesz dobrym i wdzięcznym uczniem.🤜
Zazdroszczę zarówno umiejętności jak i maszyn! Cieszę się, że dzielisz się z innymi swoimi pomysłami. Pozdrawiam! :)
~
Well thought out and executed. You’re very precise, it’s impressive
I have a rocket mass heater stove and those pieces are the perfect size for burning to heat my home. Instead of carrying larger logs you can carry these in 5 gallon buckets. Since my heater is in the basement it would be easier to carry buckets down and just pour into the burner. I use an electric hack saw to cut branches like that which is time consuming. Thanks for sharing the video. 1000 thumbs up
Videography and editing was at another level. Well done.
Nice! The only thing I'd suggest for a future one would be to put the splitting accessory on the two bottom axles so they feed toward the opening of the chipper.
You do amazing fabrication and machine work no show off just skilled craftsmanship.
Yeah this is differently the best 1 I've seen out of all the CZcams videos I've watched of these machines. 💙👌👍
Congratulations, a really great job, very useful, again what congratulations 😊👏🔝
Automatic machines like this always make me uneasy, with a few exceptions that need to be automatic, like a lathe, things like wood splitters and stuff like that turn into death traps when you make them automatic, or worse, fast. A wood splitter I used at a place I used to work, while It probably could have been quicker, worked slow and split big logs into pieces by having you pull a lever. It can automatically move backwards, so you can set it to be open for the next log while you go grab said log, but it would NEVER automatically drive the splitter forward, because that's how you would break all the bones in your arm or fingers if you managed to get them stuck between the stop at the end and the log
The machine in that video makes it look like you could easily feed your arm in the splitter part while pushing a log forward.
e: I watched it again and that thing is a death trap, lol
@@zermati You could get something snagged in a branch or a crack in the tree and get pulled in. Equipment powered by tractor power splines are insanely dangerous. Even a small tractor has enough torque and power to pulp human beings.
@@zermati Agreed. With enough use this thing will for sure bite someone.
I will add onto op comment that no matter how safe you make it, without proper maintenance even the best designed system can break down.
Have a log splitter attachment on my grandads tractor and the lever hasn't been cleaned or had the grease changed so the lever can get stuck in forward/back position. On backwards it will jerk into neutral once the arm is all the way back but forwards has no feature.
Agree. Experience has demonstrated these things to be 'death traps". A man died earlier this year in NSW, Australia by getting sucked into a commercial woodchipper; tragic. I've envied some of the homemade log splitters shown on CZcams because my hydraulic splitter is so slow; BUT it has safety features built into it's design. Nothing automatic about it. I'll take safety over speed anyday.
this is too cool to see, was wondering what this was going to do while i watched you build it, amazingly done!
i respect your handiwork, one can see that you are a very capable artisan...thank you for your creativity with metal, it is inspiring...
Your projects are awesome and well made!
Panie, bardzo dobra robota.
I didn’t watch the build, just the tree demolition at the end. Wow! You are a clever and skilled man.
That Magnet drill press Was awesome!
Отличная работа! Тоже себе хочу такое.
Salut de unde sinteti si daca faceti de vnzare
That looks awesome but might I suggest shortening the legs by 6in. PTO shaft angle is too extreme. It will prematurely we're out the bearings on the tractor side of the PTO.
Be wise to fit a shear bolt coupling to the machine end of the PTO as well.
@@michaelhewitt2463
Even better install limited slip PTO clutch.
Same thing used on bush hogs.
make your own damn wood chipper! 🤓
Is there any other reason to be
@@michaelhewitt2463 cI b ppm mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmoo
Great machine you designed a splitter and a chopper combined together great video thanks for sharing ❤
inventive, imaginative, ingenious, inspiring - well done
Рассщепитель для веток важная вещ. Плохо что ограничил проходной сечение. Можно Было-бы отходы пилорамы-горбыль расщеплять. Мне такое очень нужно. Пока нет времени на изготовление😉👍👍👍
Занятой ты наш человек ! Небось об отчизне всё думаешь !? Великими делами занимаешься ! Но время сидеть в ютубе и клаву давить находишь ...
I'm always terrified of builds like this with no safety cut off. One loose piece of cloth caught on a branch and your whole arm gets ripped off with no way to prevent it
Ti si sigurne amerikanec.
Appreciated.... Watching your video from Pakistan
Love your fast paced videos.
Nice work!
Cheers from Schuylklll County PA USA
That'll be great if all the tree branches were straight like that one you using for the video !
branches straight doesn't have matter ;)
Главное что руки прямые- а для них кривизна веток не важна!
@@MadeinPolandChannel hej, co z zabezpieczeniem wałka wom? Czytałeś mój komentarz? Odpowiesz co o tym myślisz?
🇺🇦👍👍👍👏👏👏😍
Фрезеровка на токарном , отдельный лайк, молодец!
Nice job! I love garage engineering!
Очень полезная вещь. Особенно пригодится когда Польша откажется от российского газа.
Ох уж этот русский юмор. Меня как-то устраивает. Единственным адресатом должны быть те, кто у кормушки, а не простые люди, которые надирают задницу и тут, и там. Как всегда.
Путин сказал что лес тоже у нас .
Готовься выплачивать репарации и о пенсии забудь, если ещё доживёшь до неё.
@@wladimirgrimailov1380 Аха ха ха ! Какой грозный ! К земле готовся .
У них что? крупного леса не осталось? За ветки принялись?
Fantastic engineering. Love watching your videos 👍👍👍🇬🇧
I seen that fireball tool minion square! Excellent!
That's a beautiful widow maker.
that tractor torque really makes it go through like butter 😁 great tool
Класс!!! Шикарный агрегат!!! 👍👍👍
Amazing to watch. So creative and skilled.
Intelligent build by skilled craftsmen.
Ignore the "safety wanka" comments , common sense is all that's needed
Your ingenuity is outstanding.
It’s so much fun to watch smart people operate.
Fantastyczne. Korzystalem z kazdej sekundy. Super maszynka, super praca. Ďakujem a pozdravujem zo Slovenska.
It's talented people like yourself that needs to be some of the first people on the Mars colony.
That's one hell of a machine. Job well done.
Toujours de très bonne vidéos merci beaucoup pour le partage 👍
Amazing as usual!!!🦾🦾💪🏼💪🏼💪🏼💪🏼
Hola Hecho en Polonia buenas tardes.
Muy lindo tu video mostrándonos el proceso de fabricación de esta tremenda maquina herramienta. Sos un artesano del metal, lo manejas a tu antojo como el carpintero a la madera o el alfarero a la arcilla. En resumen, me gusto mucho lo que vi. Muchas gracias por compartir tu arte con todos nosotros. Muy buen trabajo. Segui adelante. Gracias.
yet another great machine, great job!
Damn, thats amazing! I love when people build their own stuff. If you give it a paint job, it'll look even better! (and protect the metal for longer)
Farmers are the backbone of any nation...✊😎
Bloody great rig lads. Well done.
Bravo dude! Cheers from Minnesota.
Master fabricator title. Kudos.
Комментарий в поддержку канала и ролика, а также труда мастера.
Fantastic work, dude! Nicely done! 😃
That can be really useful in a farm!!!
Stay safe there with your family! 🖖😊
Great build….works great and this chipper will last for for a very long time
The editing on this is awesome imo.
Excellent Engineering 👨🔧. Hats off Job done...
Brilliant Work Sir Fantastic Your Are Awesome Thanks For Sharing Great Mechanism.
i love this machine, very useful, thanks for sharing. Regards
this guys knowledge is insane.
That is some nice work! I’m impressed.. 👏🏼👏🏼👏🏼
Great video! That’s exactly what I need for my tractor….
It was wonderful
I have no words
I really want to learn from you.God bless your hand
Хорошая самоделка - Поляк!
Brother you are doing a perfect job I love it
Looks like fun.great build, awesome work.