Tilt and Trim any Outboard
Vložit
- čas přidán 9. 05. 2020
- Help support my channel by using the link. Ad www.amazon.com/shop/omfishing#
I am going to install a after market tilt and trim unit. This CMC tilt and trim unit will work on motors up to 130 HP. This unit might be a little big for my 25 hp Yamaha but we are going to give it a try. If you want to help me Keep the FREE videos coming us the link and I get a small commission at no cost to you.
I like that Tilt Trim setup. It can be serviced easy with the motor off.
I think this is going to work very well. Thanks for commenting.
Cool old gamefisher. I have an old 1968 3.5 Eska from Sears. Loud little thing is actually a Tecumseh 2 stroke. CMC price is double from when I first looked at it. I am glad I found this video. I bought a Panther Marine 55. Your plate idea is exactly what I need to put my 20 inch on my 17 inch transom
Happy to help thanks for commenting. Let me know how it works out for you.
Use marine sealant for the bolts and washers. That's dap kitchen and bathroom sealant and could wash out. 3m 4200 or 5200 is a boats friend!
Great job brother, keep up the good work. Take care and stay safe.
Thanks brother Harvey. Stay Well.
Great setup
Thanks for watching and commenting. Keep Watching.
Great job
Micke from 🇸🇪🇸🇪🇸🇪
Thanks for commenting and as always keep watching.
Nice setup.
Thanks can't wait to get to the water. Just could not do it on Mothers Day!!
Lot's of help. TNX
Thanks for watching and commenting.
Great video
Your a beast great job old head !!
Thanks for commenting and Stay Safe!!
Is that F-N-R shifter on the yamaha tiller stock or did you add that? If you added that, please provide a link to product or maybe a video! Great work!
The tiller handle is stock on this motor. Thanks for watching and commenting.
Now the problem I would have with that that CMC Jack plate is fine but you can't rise it up and down vertical
Your right rise it up and down would be much better.
I have a Jack plate that’s bolted and welded to my transom. I wonder if I can just put the cmc on the back of that
I wanted to install my jack plate first and then the tilt and trim, I was not sure if that would move the center of gravity back to far. That 25 hp outboard I have is heavy. Let me know how it works out if you try it.
Om Fishing I thought the Yamaha was suppose to be very light. I think I have some faith in my jackplate bc there was an older 1986 mercury 35 on there before that was built like a tank. So the tilt and trim and light Yamaha should be fine. I hope 🤞
@@The_Great_White My evinrude 30hp weight was 118 lbs. My yamaha 25 weight is 126. Not a lot but more. I think the jack plate will hold with no problem. I just wonder how low the boat would set in the water with me back there.
Not sure why you didn't leave the Jack Plate but nice job !
I thought I would like the tilt and trim better than the jack plate.
just what that boat needs, some more holes in it XD
That does not worry me in the least. I have change the transom out once already and the guy I got the boat from changed it once. No need in saving it for the next guy. There was 20 holes in it already what was 4 more. Thanks for watching and commenting. Stay Safe.
Aidan Gabriel Yeeeah dude, she deserved that.
Nice but what happened to your Evinrude 30
The evinrude is on the motor stand. The friend I am working on the
E-tec. Wants to working on a deal for the Yamaha 25. I am going to take it on the water and try it out and the tilt and trim at the same time.
Hola genial tengo el mismo motor, soy de argentina y no hay estos productos. Me dice el espesor del alumnio del soporte por favor
El espesor de los soportes de aluminio es de 0,5 pulgadas
Still holding up?
How much those cost about? $800?
Where did ya but it and what was the cost? I need one
Dumb luck for me on this one. I was looking for a jack plate and a friend said he had this and I could have it if I want it. True story.
how much the cmc electric hydraulic only ? motor only, thanks
For this motor the OEM hydraulics would be about one thousand the CMC is around four hundred. Thanks for watching.
@@OmFishing thanks
Hello How much a 25hp yamaha like that used ai costs
That one is a yamaha four stroke 3 years old. I bought that from a friend. I gave 1500 and some work on his boat. That was my 50hp E-tec videos. I did see the paper work from when he bought it and he paid $3300.00
How’s the trim and tilt working
The tilt and trim is working fine so far. I have had some people tell me that it will quit working in a short time. I like the tilt when I am coming up to the loading ramp its great. No problems yet.
These LGB R2-D2 commercials are killing me
Is it possible to have both?
Yes tilt is just what it is called when you bring the motor out of the water. Trim is when you change the angle up or down just a little for better performance.
Got s question for ya I have an old 1984 evinrude 25 and it smokes like a chimney and sucks gas like you wouldn’t believe. Put in some plugs rebuilt the carburetor and basically not much changed and the carburetor adjustment knob you turn it to the right and the rpms come up a bit and then turn it to the left it bogs down as acts like it wants to stall. So this motor is white and after running it and smoking up the whole lake it starts to turn black so I’m not sure but of only one thing If I keep running this thing Greta Thunburg is going to get me😳
I would look for a blockage in the exhaust. You might have to remove the lower unit to clean the exhaust and the midsection as well. That is the first place I would check. Thanks for watching and commenting. Stay Safe.
Happy new year from Greece I have a 35 evinrude 1983 and I want a trim where I can get it used?
I don't know of any right now but if I hear of any I will let you know.
@@OmFishing OK thank you
Очень интересно. Жалко, что нет перевода.
Я думаю, что мой канал получает достаточно просмотров. Я проверю, чтобы перевести на разные языки. Спасибо, что обратили на это мое внимание. Я надеюсь, что все хорошо в вашей семье. Спасибо за просмотр и комментирование.
@@OmFishing Классный канал! Много полезной информации по моторам Джонсон-Эвинруд. Спасибо. Удачи Вам.
Im soooo puzzled it looks like everybody is putting their motor so much higher than the transom or am i just seeing things .
It all depends on how long the shaft on the motor is. If it is a long shaft motor yes it is going to look higher on the transom.
Anyone else notice that he put it on backwards and upside down lol
Unrealistic option because of price
Absolutely crap!!! Lasted 12 months and doesn’t lift any more. You can hear it groaning and grinding inside.
Don’t recommend at all
This one was given to me by a friend. I am using it in salt water. I will post how it does.