Juliet! Part 2 Freeform 360 Wire Wrapped Pendant Tutorial Layered Hammered Sanded

Hi friends! I hope you love Juliet! In this tutorial, I show you how to create a base frame that sets you up for a 360 wearable pendant (meaning you can wear it vertically on either end or as a horizontal bar. Many of you ask me if I can give more details about shaping, hammering, and sanding, so in this one, we focus on all that too! Please like, share and subscribe if you enjoyed making Juliet! Much love! Have fun! Materials and Tools are listed below.
NOTE: I'm not sure what happened to the last 1 minute of my video, but here is the finished link...
I say I'm going to go to the tumbler and 'be right back'... but then that last part wasn't there! So thank you for being here! Enjoy the short (linked below) to see the finished piece on a chain. You can slip the chain into either side of the pendant opening. ;)
• Juliet! New, FREE step...
Thanks for making one with me!
Juliet part 2 link • Juliet! Part 1 Freefor...
I give cuts and measures during the video, I also speed up through some of the sanding but the video slows down again each time I speak to share info.
You can use your Video controls to slow the motion down if you want to see the sped-up parts in real-time, but it's mostly repetitive sanding (I show the first how to sand in real-time)
Materials:
12 inches each of
16g, round, soft copper wire
18 gauge, round, soft copper wire
20 gauge, round soft copper wire
5 feet on hand of 22 gauge, half-round wire for banding
My stone is 1.5 inches long x just over .5 inches wide and 3mm thick, Oval, Purple Russian Charoite cabochon.
Additional design add-0n wires
8 inches more of 16 or 18g
TOOLS
Flush Cutter
Round Nose pliers
Bent Nose, Chain Nose pliers
Hammer and Steel Block
Tape
Sandpapers 800 or 1000, 200, 3000 (optional)
Sharpie Marker
My Amazon Associate Store...
www.perfectlytwistedjewelry.c...
Most of the tools you see me using can be purchased from my Amazon Associates store. I do get a small commission from Amazon when you make a purchase using my links. Thank you in advance for your support!
Join this channel Membership to get access to perks such as Members-only videos, Membership Livestreams, and more!
/ @perfectlytwistedjewelry
Learn to create beautiful, easy, wire-wrapped jewelry, using traditional jewelry-making techniques and tools with Perfectly Twisted Jewelry!

[@PerfectlyTwistedJewelry]

Hi friends! I hope you love Juliet! In this tutorial, I show you how to create a base frame that sets you up for a 360 wearable pendant (meaning you can wear it vertically on either end or as a horizontal bar. Many of you ask me if I can give more details about shaping, hammering, and sanding, so in this one, we focus on all that too! Please like, share and subscribe if you enjoyed making Juliet! Much love! Have fun! Materials and Tools are listed below.

[@justplaindawnmurry2145]

Oh my goodness! This is an amazing process -- such a beautiful pendant!

[@lesleyhenshaw2878]

Beautiful work, love your gorgeous pendant. Thank you so much xxx❤❤

[@gramingo6402]

I love how the wire obeys you! My wire is naughty 😜. But I’m still aiming to make a creation as beautiful as the ones you make ❤️

[@arslansa123]

Merci beaucoup 🎉

[@theresaamandola7676]

Beautiful! Thank you ❤

[@btandi1]

Unbelievably gorgeous! I’m working on this now! You break it down so well that I can even do this!

[@lisasbeadbox1]

Hey lady, where did you get that stone?