just an idea on what to expect with one of these UNIVERSAL KITS you see floating around the internet... feel free to ask me anything.. kit on ebay: www.ebay.com/i...
I bought one of these kits a couple of years ago. I just replaced them with the replacement power regulators for my 06 Ranger since they started to fail. Most cars and trucks are already made to fit power regulators if you have manual windows. The replacement regulators are as good as OE and go up and down more smoothly and can cost less then a conversion kit.
Hi I have one of these kits fitted great but one side will do down but won't go up you hold the button up and takes a few minutes to respond l've tried siloken spray but makes no difference would you no the issue been fitted just over a year
Where can I hook up the red wire up so it can power when only the car in on was going to use a fuse tap but can’t find one that I can put the 30amp fuse in only seen some 10amp max
@@Sip28 did a relay from the battery and put a switch on to turn off and on so it’s not draining power with the car is just sitting you could also tap into your ignition wire but I Did it the safe way and ran a relay with a switch
@@Sip28 recommend this set up with the right gauge wire I’d use 10 gauge for power and could use small wire like 18 gauge to run the switch to the dash czcams.com/video/QAD8vDHTbzo/video.html
Hello Chris I have this exact setup in my 79 camaro however the windows are drawing too much amps and I want to install relays in hopes the relays will provide the amps to the motors. Could you please help me figure out the wiring of the relays. I inly want power to the windows when the key is turned on. I have switched power but I don’t know how to wire it.
How does it know where top and bottom are, to cut the motor off? Do you program that once you install or does it just run and the motor isn’t powerful enough to damage anything?
2022 one shop quoted me $1000, another $1200, both seem to quote me the "gullible lady " price. I did my research before going to either. I knew the range for parts & labor was around $450+. I'm a hard core home DIYER but I know my limitations. I found a car audio stereo place that will charge me $650. Im okay with that price. because i looked up the part ---AEW JW universal Heavy Duty conversion kit --was $259. I'm okay paying that price knowing it will be done by a professional with a warranty by someone who has done the job many times.
What do you mean that hole is not on center? Having trouble understanding why you needed to use the shock absorbers for the non-motor end.
I bought one of these kits a couple of years ago. I just replaced them with the replacement power regulators for my 06 Ranger since they started to fail. Most cars and trucks are already made to fit power regulators if you have manual windows. The replacement regulators are as good as OE and go up and down more smoothly and can cost less then a conversion kit.
Very good job. I got a 2005 Ford F-150 STX. So I also ordered a kit on Amazon, I paid $71 with free delivery. Thanks for the vedio young brother.
Man you're on point with these videos. Ordered my kit last week for the 65 impala. Will definitely use this video for help
Are usko Humko chahie matlab Kaise Milega ya yah ki 12 ki
As always, a great and informative video. Thank you very much for taking the time to make it and post it.
Your videos are always very helpful, thank you!!!! 👍👍
hEY, hEY Chris YOU are amazing, you made this so SIMPLE. I will do it by myself. THANKS!!
Great video! I really like how you explained everything and now I know what to look out for!
nice video, i wish i had watched it before my installs, now i need more plastic parts.
I put mine right over the access hole for the locking mechanism. it fits perfectly.
That cat wants attention. : )
Awesome vidéo great instructions thanks buddy!
Hi I have one of these kits fitted great but one side will do down but won't go up you hold the button up and takes a few minutes to respond l've tried siloken spray but makes no difference would you no the issue been fitted just over a year
Really helpful, thanks! 🍻
I want to make my mercedes w123 1982 with power windows😂
Will this work for a 2005 Toyota Corolla ce
Hi, I have a 1978 Chevrolet c10. Can I use this electric download on my car?
Great video bud👍👍👍
How does passengers operate the right side window
Where can I hook up the red wire up so it can power when only the car in on was going to use a fuse tap but can’t find one that I can put the 30amp fuse in only seen some 10amp max
Exactly! I’m in this situation too. Can you help me as well?
@@Sip28 did a relay from the battery and put a switch on to turn off and on so it’s not draining power with the car is just sitting you could also tap into your ignition wire but I
Did it the safe way and ran a relay with a switch
@@Sip28 recommend this set up with the right gauge wire I’d use 10 gauge for power and could use small wire like 18 gauge to run the switch to the dash czcams.com/video/QAD8vDHTbzo/video.html
Question I can get the driver side working by itself or by the driver side, but can’t get it work at the same time from driver and passenger.
Hello Chris I have this exact setup in my 79 camaro however the windows are drawing too much amps and I want to install relays in hopes the relays will provide the amps to the motors. Could you please help me figure out the wiring of the relays. I inly want power to the windows when the key is turned on. I have switched power but I don’t know how to wire it.
This video is from 2 years ago, how is this system holding up? has anything gone wrong?
great presentation.
Does it have a wiring diagram
How does it know where top and bottom are, to cut the motor off? Do you program that once you install or does it just run and the motor isn’t powerful enough to damage anything?
your windows have stops
Can i wire it to 24v??
Awesome
2022 one shop quoted me $1000, another $1200, both seem to quote me the "gullible lady " price. I did my research before going to either. I knew the range for parts & labor was around $450+. I'm a hard core home DIYER but I know my limitations. I found a car audio stereo place that will charge me $650. Im okay with that price. because i looked up the part ---AEW JW universal Heavy Duty conversion kit --was $259. I'm okay paying that price knowing it will be done by a professional with a warranty by someone who has done the job many times.
Can this kit be used to replace an oem power window mechanism?
no
Can I do this to my 4 door 2018 Jeep Wrangler Jl Sport??
mine is an 04... I don’t know
can u put the power window on said door (have an 05 LJ) and also the power locks from ur vid with the half doors?
yes..if you are in houston i will give you the the power window kit.. i sold my full doors
@@chriscraft77022 im in NJ but thx got the same PW kit diff lock kit hoping it works
@@chriscraft77022 - I am in Dallas if you still have the kit. I will pay to have you ship it here. Surely that is what, $20?
What your zip code
@@chriscraft77022 75048
Shop just quoted me 450$ for install is this a good price
hell no
What's a fair price cause I thought that was a little high
it doesn’t matter what I say... it depends on the vehicle and where you take it..
your ebay link is not working :(
i fixed it, sorry