Video není dostupné.
Omlouváme se.
How To Install Universal Power Windows | In Depth Tutorial | Manual to Power
Vložit
- čas přidán 11. 01. 2020
- #universal #powerwindow #howtoinstall
www.amazon.com...
In this video I Install a Universal Power Window Kit in my vehicle with roll up windows. This is a simple modification anyone can accomplish with a little patience and time.
Power Window Kit - amzn.to/2TjLo1Y
Power Door Lock Kit - amzn.to/3sLyP0v
How to Install Power Door Lock Kit - • Install Power Door Loc... .
*Disclaimer: This video description contains affiliate links. That means that I am awarded a small commission for purchases made through them, at no added cost for you.
To be honest I literally just found you and the way you explain stuff is so good. Keep up the good work !!!
Thank you sooo much for this 🙏🏽 I was actually contemplating going to my local junkyard, removing and purchasing 4 door panels for the same vehicle that had power windows. This is much simpler, cheaper and less time consuming! Especially since I have to keep checking for the model and wouldn't know until after installing if they even work!
and less heat and pick over junked cars. lol
Factory stuff is so much better than this trash, and it bolts right up
I wasn't planning to do this in my Solstice, I was watching your power locks actuator video and this one auto played by accident and now you've convinced me. Good project for all my free time!
Me too
I really like this video, you explained all this very well, no filler, no BS. Much appreciated! I am about to do this job on my 04 Honda Civic DX, I'll have power windows for the first time! (11 years with this car, still running great). Cheers mate!
Question for you: did you use a fuse tap for power, and if so, what existing fuse did you tap into and what AMP was it? Thanks.
Excellent video. There’s a 2019 F250 crew cab work truck with the diesel engine and a whopping 7 miles that my local Ford dealer wants to sell for $35,000. The truck has no power windows and no cruise control. It seems that those two things can be added for fairly cheap. I don’t care if they don’t work the same as factory as long as they get the job done. $35K for a diesel work truck that’s brand new and can be converted to a fairly comfortable truck is starting to sound really good.
Excellent video. Now I understand how it works and I can see the system isn't the mass of clutter it looks like.
I like how clean and very clear you are when you explain everything, Thank you 👍🏿
I try to keep the videos simple and straight to the point.
THIS IS PERFECT, thank you so much for not wasting time, best video on this subject I can find, about to upgrade a Colbolt with this kit and this was SUPER helpful, I will be checking out your other videos.
Such a wonder fully made explanatory video highlighting all aspects, makes it simple for novices, like me, to grasp and understand
Imma be honest, I didn’t need to know this information. Stayed because you did a great job breaking stuff down. 😂 I will probably never have to do this, but I stayed liked and commented. Thank you for your hard work
Awesome video. The makers of this kit should of definitely payed you for doing this video. I'm sure I can speak for 90% of the people in these comments your video convinced me to buy this kit.
Thanks for this... I used to put these in new dodge cars in 1990 and 1991 when I worked for car stereo company... spal was the brand, amazing they are still the same, this was the best kind then and I still believe now.
I agree!
I suggested this product to my mother-in-law for her older car. She purchased one from Amazon and it did arrive fast but when we opened the box, the parts looks like it had been used before. Seems like they have sent a “returned” item. The white gears and risers were dirty and greasy, some of the screws & rubber bushings are missing. Even the power window motors are dusty and scratched.
We are communicating with the seller but it has taken a lot of emails back & forth. We sent them pictures of the parts and lately pictures with circled notations.
They are probably figuring out either to send a brand new box or just replace the missing and dirty parts. Hoping to get this sorted out so that I could install it this weekend. Btw, I installed the Keyless Power Door Locks without any problem. Awesome video tutorials and keep it up!
Could you please show how/where to connect the red wire to fuse box, that’s literally the only thing I can’t find anywhere
Should connect to your windshield wiper fuse. 30amps, with a fuse tap
Do an extra step and run a wire from the battery to the new fuse box. Splicing into existing things are just lazy work and you wanna do quality work. Adding a fuse box will allow you to add rear view cameras, dash cams, lighting or anything else that needs power.
Sifaka since my truck is a base trim work model I would love to just add a fuse into my stock fuse box. The spots are there. Any advice on that?
Same, just did mine yesterday and only thing i need is the power 12v
Go to your auto part store and ask for an add a fuse. And you can connect your existing fuse and a new fuse in the same slot
I am super grateful for how detailed you are. You are giving me a lot of confidence to try this myself.
I didn't know this was an option! I'm glad you shared! We have an '05 work truck that would be nice to have this in!! Thanks Ryan!
Now this is what I call a good instruction video ⭐⭐⭐⭐⭐
Merci beaucoup pour votre vidéo....
J'ai une voiture ancienne. Cela fait un petit moment que je cherche à installer des moteurs électriques pour les vitres de mon véhicule. Je ne savais pas trop où chercher. Mais là c'est une révélation. Encore merci.
I've been considering these for a while now. Thank you for the in depth video I will defiantly be ordering them
Great video! I'm just about to install this same kit on my s10 and found this video very informative.
I just did this today. Thanks for the instructions! I used a fuse tap for the power. Ford has a 15v fuse for power wondows and sunroof even if you don't have those options lol.
Excellent!
What year and model is your Ford?
2013 f150 xl
@@dougphillips7339nwnwn Thanks man
Awesome video…. was looking for a way to somewhat “modernize” my 1988 Mitsu MM pickup… had no power options whatsoever
Edit : power steering
Excellent video. Very easy to follow and you described everything very well. Thanks. I used a similar kit on a Frontier I had back in the day after I got tired of manually cranking open the windows. LOL.
I’m watching this to add it to a frontier lol
I installed one in my car works pretty well I enjoy having power windows over my old cranks.
Very thorough walkthrough. Bless you sir
Great video man I wanted to let you no I couldn’t cover the old window handle so i made it were it could fit back so it looks manual up and down.but i have the new power switch installed in some blanks that was in my dash.wasn’t fun getting them to stay in place lol.
Great video 👍 just ordered 2 sets one for my 91 honda crx and one for my 89 hatch back civic 😎💯 cant wait till they get here looking forward to this conversion
Good video. It was informative and Finnertaining. There was a section in there where you videod your hands and Finners which is usually hecka irritating to me but this was not. Thank you for doing such an informative video, you helped make my choice for my window actuators and the Finnershed product looks really good. All joking aside, killer video. thank you.
Excellent thank you. I was looking at this kit for my 1995 Land Rover defender 90. Now am going to give it go. Great video. 🙌🏼
Dude great video, I was looking for a tutorial video to install one on my tacoma, I’ve been doing some stuff to it, security dash cam, led lights in the bed, backup cámara and next will be this, thank you and GOD bless keep up the good work.......
The fact they’re plastic is an instant pass
Just use a cloth to remove the window crank, I normally use an old sock. Wedge it in the gap and just pull the sock until it hits the wire and just keep pullig and viola.
Very good video
Easy to flow GREAT JOB
Thanks
Thanks brother, am connecting my L200 mitsubishi tomorrow. 2020
Sir if u r from phil. pls advised Iam also interested to upgrade to power window, Thanks
Are they still working properly to this day?
Great video man!!
This is an excellent video. Clear and concise.
I use the wiring and the switches from the kit. I use the oem power regulator and use a pig tail to connect to that aftermarket one.
What did you use to power the regulators? Jumped off a fuse?
That’s pretty dang slick. Great find and very good information. I should see if there’s room in my little Nissan work truck. I’d happily spend that to go from manual. Getting lazy in my old age. 😂
Simple and brilliantly explained 💕
I think I will copy all your activity. It is exacting what I was looking for but for my old Alfa Romeo Duetto Spider 1989!
Thank you so much for the video, can’t wait to do my truck 😎
Perfect explanation, thank you!
GREAT VIDEO AND GREAT UPGRADE. I have the same truck. Keep u the great videos man. Big fan.
I wish someone did an in depth video on the wiring part, that seems like the most complicated part.
ain't scared Garage did indepth wiring vid on this kit
Great video, the only thing I would do differently is add a relay for the power to the unit, use the ignition to trigger the relay.
me too is the way im going to do it
How exactly do u use a relay to trigger it? I know how they work im just trying to figure out how to wire it correctly
Use an automotive 5 prong relay (universal) 87 to batter 30 to feed power (to windows switches) 86 to ground and 85 to ignition position on
Nice video. I would add a relay with power directly from battery and have the ignition act as the signal.
Honestly thought of doing this. I’m sure it might be a tad responsive as well. Should be able to deliver more amperage to the motor.
@@Fentertainment I was just thinking maybe the ignition wiring would be too small a gauge and or fuse rating would be too low. Whenever I install things like high flow fuel pumps, that’s what I do to be on the safe side.
I was hoping this would come along 👍👍👍
I already install the tailgate assist ,door locks lol
lol now I'd like to see you close the door, I probably would've either grabbed a power window door panel from the junkyard or cut holes in the blank space above the door pull, but to each their own.
very good video. im gonna buy this for my ford f150. thank you.
Great Video, just what I needed to guide me through fitting mine :-)
😀great har
Thank You ...
Great video. It will make my job much easier, *but* I wouldn't put the switches in the door pull like that. You can't put your hand into the pull, and on a windy day you need to hold on tight.
I used this same kit but got oem window motors and used factory switches from 2000 factory door panel from a oem window truck
Recomend lubeing the rails on your window make it easier for the motor
Outstanding!!!!!!!!!!!!
Great dude, thanks.
Brilliant, thank you
I installed this type of conversion a couple of years ago and they both have started to fail. So I ordered a set of replacement power regulators from A1 Auto for $75. Since I already have the switches I will just use them. You can get a set of universal switches from Amazon for $26. Yes, you will spend a little more if you buy the actual regulators and a set of universal switches, but you will get a superior product with better performance and reliability from the actual regulators. You will have to remove the manual regulators and install the power regulators. The good news is that the mounting holes are already there, so no drilling. Look for a video for your specific car or truck They run up and down smoother and not as jittery and noisy.
Do you know if you can get oem window motors and swap it to the kit ?
How do you "connect the last red wire to the fusebox for ignition power"? How does that work? Are there terminations for bare wire at the fusebox? Does the wire have a clip or connector to plug into the fusebox? Ive done a lot of work on my van but nothing electrical yet. Great video, though! I learned a lot!!
Good video
excellent tutorial
thanks for your video is very nice explanation
which this brand u used
Wow great video 👍🏾
I bought a kit like this with lit up buttons, I rolled the window up and it was having a hard time then it stopped. Lights went out and I heard a pop. The in line fuse wasn't popped, and I'm plugged into an IGN port. No longer works and I'm stumped!
Ah, the good old "jesus" clip.
Jesus "pin", if you know, you know
Great video! Absolutely supreme detail! I have the same truck ('01 Sierra) I bought the same kit and I'd REALLY REALLY like to know where you got your 12V ignition power. I'm going to do this install, plus the power door lock install you did soon (weather permitting). Thanks so much!
Charlie, Check this link out. Should tell you everything you need to know. This website is listed in the description of the video and what I use for all of my vehicles. www.the12volt.com/installbay/forum_posts.asp?tid=7482
Wow beautiful job on your video and you installed it on my very vehicle. Now were you mounted the switches doesn't it get in the way of you closing the door.
To this day the witches are still there. Kinda wish I would’ve mounted them different but the hole is there so it’s done.
You're the best 👍
If there was a wiring process that would be useful
How do I connect the wife to the fuse box for ignition power
I need to know where to connect the wires
Great video.
Very cool thanks
great video
Thanks new subscriber!!!
Sar best video
I have a question. If my truck has manual windows, and I installed factory power window buttons, could I run the wires, after they are ran to power/ground to the factory switch buttons?
Regardless phenomenal video man!! You gained another subscriber! Thanks for posting a how to video the right way!
Where do I connect the red wire to power it I got a mini fuse tap to tap into the fuse box but the fuse tap I got Says not to use anymore them 10 amp but the window kits is a 30 amp so I can’t use the fuse tap. Where els can I connect the red wire
Seems like it would get in the way of the door handle. But to each thier own.
Are you talking about where I mounted the switches? If so the door pull yes but the handle is below that and is free and clear. But you can mount the switches any where you prefer since its universal.
Wonderful easy video this man should do more videos
I found a set of these switches and all the wiring for around 30 bucks. Do you think this setup would work with oem power regulators from higher trim truck? Instead of using old gear system and using the chain type you have couldn't it work with the originals to gm? That's my plan anyways I guess I'm just speaking into the ether to see if anyones done it. Great video BTW if I decide to do this soon I'll definitely be using your tutorial! Super clear directions
I think it would
@@Fentertainmentgot a little buzzed and ordered all the parts last night so we will see lol
Great tips on removing the window handle. Sure hope those motors last longer than GM factory ones. Are there clips for removing the door panel? Like plastic push and pull ones?
the part where you fed the wires through the A pillar door jamb, it seems to me your WHOLE life lead up to you saying "the correct way to do it"
So cool
Great video. How are they holding up?
Good.explanation.thanks... Is there anyting weakness form.this kit...
11:45 horror drilling 😂
I think you meant horrible and I would agree looking back.
...yes.. 😉
Holy shit!
I have no clue where my ignition power source is at on my 2006 Silverado 1500 where would it be at???
And a good ground
Can you do an update video on how the power works are working?
Does it have 2 swtich for friver and passenger side? Or only the driver side have the switch??
Nice tutorial by the way
Very simple and clear explanation..
It comes with 3 switches
Hello man !! Did you use relay ?
Is there a switch for the passenger side ,so your passenger can control that window ? Never mind i saw one in the parts illustration. Great vid btw.
great video. So a year after, how is this kit holding up?
Can we just wire it from the speakers?
This seems to be a solution for my 2014 Titan S model, which currently has manual windows. However, manually they are quite tight to operate. Is this motor assembly stout enough to handle normal pressure?
My crank windows are a little stiff to roll up and down.Will those motors handle it?Excellent video by the way.Thank you
Nope they're weak asf
Mine didn't work but I greased all the moving parts and it worked like butter
You should have mentioned cleaning tracks and greasing.