How to Replace Air Intake Boot 01-05 BMW 325Xi
Vložit
- čas přidán 4. 09. 2019
- Buy Now!
New Air Intake Boot from 1AAuto.com 1aau.to/ia/1AEIH00069
In the video, 1A Auto shows how to remove and replace a cracked, torn, leaking or damage air intake boot. The video is applicable to the 01, 02, 03, 04, 05, BMW 325Xi, and similar E46 models.
This process should be similar on the following vehicles:
2001 BMW 325Xi
2002 BMW 325Xi
2003 BMW 325Xi
2004 BMW 325Xi
2005 BMW 325Xi
2006 BMW 325Xi
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oaUC/1AXAA00013
• 10mm Socket 1aau.to/oaEp/1AXAA00017
• 6mm Socket 1aau.to/oaEp/1AXAA00017
• Side Cutters
• T30 Socket
• Ratchet 1aau.to/oa7F/1AXAA00016
• Socket Extensions 1aau.to/oaS4/1AXAA00015
• Marker / Writing Utensil
• Pick 1aau.to/oAz/1AXAA00037
Subscribe: / @1aauto
Check out our playlist:
BMW 325Xi 1997-2006 4th Gen: • BMW 325Xi 1997-2006 4t...
For More Info visit us at 1aau.to/h/bPv/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
So glad I found this I was about to be charged 800 something for crank shaft seals and that wasn’t even the problem
Excellent guide. Just did the replacement on my 325ci in the drive way with this video. Thanks!
Haha thanks for this video, i knew what to remove and how to do it,
but you really helped me with the way you removed the metal shielding below the vents on the hood and the plastic shielding on the right side, i didnt know that could be removed, so i dropped my ratchet on the plastic undertray 5 times trying to do it without looking 🤣
+That Fiat Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Well done!!
This was a helpful guide…
Cheers..!
That 1A advert in the middle about gave me a heart attack with the noise difference.
Is the intake boot from 1A Auto flexible? Especially the small pipe to the idle air control? I have one from a parts supplier that is not easy to bend. thanks!!
My intake boot does not want to stay on no matter how tight I clamp the ring it slides off after the smallest tug , my old one that’s now ripped was way more flexible and about a centimeter shorter , any advice? It’s on a 2000 328i
Hey you forgot to take the inner hose connector and reuse It on the new hose. This will for sure give you a small vacuum eventually a engine code
What inner hose connector do you mean
So I used the T30 like you mentioned and got the top one out but doing the bottom one it ended up stripping. After further inspection mine is a T40. Don't know if it's like that for everyone but now mine is stripped and I can't get it out 😑
Mine was T40 as well 325ci.
Mine is all *t40* , I had to go to harbor freight to get the drill set since I only had t30 and lower....
Can this cause codes p0171 and p0174 ?
Yes. A crack in the intake boot can cause it.
Removed the battery cable for an air intake install 🤣🤣🤣
😂😂😂