That's cool - I bought a pair of ulti clips based only on the ministry in the very beginning! I still use them today on my work holster, a Crossbreed mini tuck for my Glock 43 (tie, tucked in shirt, NPE 5 days a week) I don't think I ever had one issue with my Ulti clip originals. May God continue to Bless your company and the ministry behind it!!!
Thank y'all so much for making this these I've boughtt $300 knives and had to have $70 sheath made for them and the sheath is fine but they put a big old stupid tech lock or some other dumb looking half inch thick clip that's thicker than the knife and the sheath itself! Thank y'all for making a clip that is thin and it works and it's also adjustable no matter what the pattern is on the Kydex sheeth great job!
Love my Ulti-Clip XL ... what would you recommend for the edges, that over time, scratch up a belt, and wear out repeated attachment points on clothes? I mean, UFC-worthy retention, great design, strong, functional, and versatile - yes ... though with the metal being rather thin (while also strong and not bulky) but still somewhat "edgy" (tho not necessarily sharp) ... but just not even rounded, out of the box.
I purchased a few ulticlips and my problem is the lever that opens and closes the clip is hard to open. The clip lever is so small that it is a task to get your finger under it to open. It needs to be longer and bent out to get a better purchase of the lever.
The Ulticlip itself doesn't have adjustable cant horizontally. However, different holster manufactures design the mounting points on their holsters to have adjustable horizontal cant.
Just to confirm, if I want an attachment system I can use with or without a belt (sweatpants, athletic shorts, whatever), the XL is the way to go? I carry AIWB. Thanks!
We'd actually recommend our Ulticlip 3+ in that case. The XL is designed to work best with a belt while the 3+ can be worn with our without a belt. When using the 3+ with a belt you can still attach to the waistband and then run the belt over the front of the belt.
It would all depend on your holster. The way the holster is designed is what makes it tuckable. If your holster is tuckable and you can use Ulticlip then it will remain tuckable.
It depends on the location and design of the mounting points of the holster. Under FAQ'S on the Ulticlip website we have printable mounting templates available for each clip. If you print those out to full size you can visually inspect if the Ulticlip will integrate onto your holster efficiently.
I need your help I just got my ulticlip 3 + and for the life of me I don't know what I'm doing wrong the screws are too short they don't line up I have the SRK 6 the sheath they seem to be too short I've tried several combination someone please help me some pictures
@@swifty716 Have a look at the "Which Ulticlip" page of our site where you'll find specs on each of our clips along with mounting templates that will help you to determine compatibility.
That's cool - I bought a pair of ulti clips based only on the ministry in the very beginning! I still use them today on my work holster, a Crossbreed mini tuck for my Glock 43 (tie, tucked in shirt, NPE 5 days a week)
I don't think I ever had one issue with my Ulti clip originals. May God continue to Bless your company and the ministry behind it!!!
Thank y'all so much for making this these I've boughtt $300 knives and had to have $70 sheath made for them and the sheath is fine but they put a big old stupid tech lock or some other dumb looking half inch thick clip that's thicker than the knife and the sheath itself! Thank y'all for making a clip that is thin and it works and it's also adjustable no matter what the pattern is on the Kydex sheeth great job!
That was a great video that was short and sweet and to the point. I looking at getting one of the 3 and XL models
Thanks for the explanation!...think I may need the XL ..looks like some great options
Love my ULTICLIP 3 on my Hawg Holster IWB Holster!!!
Thank you!!! Just the info I sought. :)
Love my Ulti-Clip XL ... what would you recommend for the edges, that over time, scratch up a belt, and wear out repeated attachment points on clothes? I mean, UFC-worthy retention, great design, strong, functional, and versatile - yes ... though with the metal being rather thin (while also strong and not bulky) but still somewhat "edgy" (tho not necessarily sharp) ... but just not even rounded, out of the box.
All your vids should have a link to your website and Amazon store in the description. 😀
Steve Rodgers Great idea. Thanks for the recommendation.
I purchased a few ulticlips and my problem is the lever that opens and closes the clip is hard to open. The clip lever is so small that it is a task to get your finger under it to open. It needs to be longer and bent out to get a better purchase of the lever.
That's just what I was looking for I think I found it on multi clip 3
do you think a single XL clip would work carrying a 1911 in appendix position?
Does the xl provide more retention holding to your pants?
3+ with a werkz holster seems to be my best option
Any plans to make a clip for appendix carry style holsters that have 2 parallel screws on the top with tuck-able capabilities?
David- Soon! 😉
That would be great ... so I will wait until that date ... sorry didn’t mean to rhyme hahahaha
I'm going to try this clip. The only thing I'm concerned with is that it doesn't look like you can adjust the cant for 4 or 5 o'clock carry
The Ulticlip itself doesn't have adjustable cant horizontally. However, different holster manufactures design the mounting points on their holsters to have adjustable horizontal cant.
Thanks!
What is the difference in what the 3 versus the 3+ are designed for? I will be using for the IWB use.
The 3+ is our most popular clip for use on holsters and has replaced the Ulticlip 3. Let us know if you have other questions.
Just to confirm, if I want an attachment system I can use with or without a belt (sweatpants, athletic shorts, whatever), the XL is the way to go? I carry AIWB. Thanks!
We'd actually recommend our Ulticlip 3+ in that case. The XL is designed to work best with a belt while the 3+ can be worn with our without a belt. When using the 3+ with a belt you can still attach to the waistband and then run the belt over the front of the belt.
Can you make an ulticlip that replaces the "two screws at the top" iwb belt clips?
Steve- Yes, we know there is a need for a more secure alternative to that type of clip and we have plans to work on a design that will meet that need.
Can ride height be adjusted?
You can tuck shirts with model 1 and 3 correct?
It would all depend on your holster. The way the holster is designed is what makes it tuckable. If your holster is tuckable and you can use Ulticlip then it will remain tuckable.
Would this work for an appendix sidecar holster?
It depends on the location and design of the mounting points of the holster. Under FAQ'S on the Ulticlip website we have printable mounting templates available for each clip. If you print those out to full size you can visually inspect if the Ulticlip will integrate onto your holster efficiently.
Will ulticlip fit on the alien gear shapeshift iwb holster?
Yes, we’ve seen others retrofit our clips by creating a small hole/incision through the fabric backer to then attach with screws/posts.
I need your help I just got my ulticlip 3 + and for the life of me I don't know what I'm doing wrong the screws are too short they don't line up I have the SRK 6 the sheath they seem to be too short I've tried several combination someone please help me some pictures
Does this work for a safariland holster
It depends which Safariland holster you are referring to. Feel free to email us if you'd like us to loop at a specific holster with you.
@@ULTICLIP model 27
@@swifty716 Have a look at the "Which Ulticlip" page of our site where you'll find specs on each of our clips along with mounting templates that will help you to determine compatibility.
Nice gun, talking in the range is always impossible though lol, may as well be sign language
i wanted to buy slim 3.3 but i find out on comments that its an incomplete set, i must buy scews and washers separately to work! great job, i wont.
Our clips now include two screws, two posts, and two rubber washers.
@@ULTICLIP yes, you are right. sorry, i listened someone in the comments. i already ordered it. cheers!
How about showing how the clips work…..
Sure, check out our other videos that show how each of our patented clips work.
Can you tell me whether the Ulticlip 3 can be used to put a reverse cant on a Kydex holster?
Ulticlip3 does not have a slot to allow for cant. Some holster companies make their holsters so that Ulticlip3 will cant.