How to Replace Door Lock Kit 1993-1997 Ford Ranger
Vložit
- čas přidán 25. 08. 2024
- Buy Now!
New Door Lock Kit from 1AAuto.com 1aau.to/ic/1ADL...
This video shows you how to install a new door lock cylinder on your 1993-1997 Ford Ranger. If the door lock on your vehicle has become frozen, seized, or damaged, so that you can't unlock the door, you can replace the lock cylinder yourself.
This process should be similar on the following vehicles:
1993 Ford Ranger
1994 Ford Ranger
1995 Ford Ranger
1996 Ford Ranger
1997 Ford Ranger
Tools you will need:
• Phillips Bit in a Ratchet 1aau.to/oa/1AXA...
• Trim Tool Set 1aau.to/oa/1AXX...
• Pliers
• Complete Torx Bit Set 1aau.to/oa/1AXA...
• Ratchet 1aau.to/oa/1AXA...
• Drill
• Drill Bit Set 1aau.to/oa/1AXA...
• Liquid Thread Locker
• Pick 1aau.to/oa/1AXA...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
You do all this with a calm voice. I did some of this with not a calm voice.
How much does the lock cylinder weigh? And are both driver/pass door configs the same?
About 3 oz each. Lock with black plastic goes on driver side door. White plastic mechanism goes on passenger side.
This is incorrect how to disconnect rod. You will notice that he breaks one of the plastic teeth that holds the rod in place to cylinder. The proper way is actually to pull the cylinder out from the exterior of the door, and then you can slide the cylinder off the rod with just a little bit of maneuvering. I found it fairly easy when you hold the cylinder from outside the door with one hand, and the other hand can hold the rod from inside the door. Also the replacement cylinder kits don’t typically include the plastic piece he broke. That needs to be reused or bought in addition to a new lock cylinder.
Thank you, this is awesome
You help me a lot man thank you!!! I save 75 dollars lol.
where does the other end of the lock cylinder connect? someone tried to steal it and the rod connected to the lock fell inside the door. thanks!
No se quién sea o que dijo, pero muchas gracias mi buen Don
Is this the same for a 2009 Ford Ranger XLT do you think. No manual window crank though. My door opens with the remote only, won't with the key. Lock knob completely disappears when locked.
gracias
What size torx?
Good tutorial, but the chrome door lock makes it looks super cheap.