How to Replace Coolant/Washer Fluid Tank 1993-1997 Ford Ranger
Vložit
- čas přidán 12. 09. 2024
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/38/aP...
This video shows you how to install a coolant/washer fluid tank on your 1993-1997 Ford Ranger. Your vehicle is equipped with a tank containing extra coolant, and space for the coolant to overflow to when the system gets hot. A cracked or broken tank could slowly drain your vehicle of much needed fluid. A dirty tank could send debris into the system, clogging it.
This process should be similar on the following vehicles:
1993 Ford Ranger
1994 Ford Ranger
1995 Ford Ranger
1996 Ford Ranger
1997 Ford Ranger
Tools you will need:
• 10mm Socket 1aau.to/o4R/1AX...
• 7/16 Inch Socket 1aau.to/oaut/1A...
• Ratchet 1aau.to/oaut/1A...
• Socket Extensions 1aau.to/oacK/1A...
• Cloth Rags 1aau.to/oiP/1AX...
• Fluid Transfer Pump 1aau.to/on/1AXA...
• Drain Pan 1aau.to/oid/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
my 94 ranger coolant/wiper fluid reservoir doesn't look like that. it's thinner and sits along the side.
Doesn't look new. Wonder if it's discounted.
I just drained the washer fluid, disconnected the power connector to the pump, pulled the pump out, disconnected the small hose on pump then replace pump...no need to drain coolant and no reason to pull off coolant and washer fluid containers.