Great video of a truck with rust as would be commonly found on vehicles in at least half the US. So much more helpful than repair videos of vehicles with not a speck of rust on them anywhere. Kudos to TRQ for showing a repair video of how to overcome problems with rust and corrosion that are often encountered.
+@kipblack7196 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
No on sales a radius arm for a 97 2wd f350. Which is amazing considering how many flatbeds, dump trucks and cab and chassis you still on the road. I had to take a Welder and fill in all the metal behind the threads on shank of my radius arms. i machine it myself with the old angle grinder. i had to do this before being able to install new bushings
Do you have any videos on how to replace the front radius arm bushings on a RWD 99-03 Ford Super Duty? It is a single bushing that sits in the end of the radius arm with a bolt that passes through where it mounts to the chassis. The only guides I can find are for the style you show in this video.
Wouldn’t it be easier to cut and drive out the rivets on the brackets and pull them off towards the rear of the truck? I mean, if you’re replacing the radius arm, this would be the way to do it.
This is a wonderful instructional video by a great mechanic and it helped me out a ton. My only critique is that in the narration the phrase "go ahead" was used so often that it was very distracting to the otherwise clear and concise instructions. Thank you sir!!!
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
This is one of the only videos I can find that actually details how to remove the radius arm thank you for that
Great video of a truck with rust as would be commonly found on vehicles in at least half the US. So much more helpful than repair videos of vehicles with not a speck of rust on them anywhere. Kudos to TRQ for showing a repair video of how to overcome problems with rust and corrosion that are often encountered.
My radius arm just cracked in half from rust; thanks for having this excellent guide up!
Very informative. Mine finally snapped (rotted away) while I was pulling an enclosed trailer. A little scary ! Thanks for the great vid.
+@kipblack7196 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
No on sales a radius arm for a 97 2wd f350. Which is amazing considering how many flatbeds, dump trucks and cab and chassis you still on the road.
I had to take a Welder and fill in all the metal behind the threads on shank of my radius arms. i machine it myself with the old angle grinder. i had to do this before being able to install new bushings
I have to replace the whole arm. Because the right side had nothing left of it. So this video helps me get a 1994 Ford F150 5.0 V8 back on the road.
Never seen such rust before. They chemically dissolve vehicles up north in the winter.
Thank you for the great explanation and your time. Youve got a new subscriber 🙏
is it the same on 4wd, i have a 1990 and the radius arm bushings are completely blown
Do you have any videos on how to replace the front radius arm bushings on a RWD 99-03 Ford Super Duty? It is a single bushing that sits in the end of the radius arm with a bolt that passes through where it mounts to the chassis. The only guides I can find are for the style you show in this video.
Master mechanic. Great video.
+f h Thanks for watching our video! 1aau.to/m/Shop-TRQ
Wouldn’t it be easier to cut and drive out the rivets on the brackets and pull them off towards the rear of the truck?
I mean, if you’re replacing the radius arm, this would be the way to do it.
Great video, very helpful! Thank you.
Pn for the lower shock mount?
Will a manual trans from a 95 XLT 4x4 4.0 bolt onto a 2000 3.0 motor?
Just one of the reasons nearly all these vehicles aren't on the roads anymore.
Awesome job
Would it fit a 1993 4x4?
Ya estabas ahí por qué no limpiar , me pone ansioso ver la mugre y no limpiar
This is a wonderful instructional video by a great mechanic and it helped me out a ton. My only critique is that in the narration the phrase "go ahead" was used so often that it was very distracting to the otherwise clear and concise instructions. Thank you sir!!!
Placemarker comment. 13:00
What a rust bucket