Great vid! For someone still learning impressive how you knock those jobs out!!! I wrenched for yrs in a previous life and was svc manager for 12. Still figuring out how to work on these machines tho. Hope you get sorted quickly!!!
@@TheFreshRinse other than solenoid mentioned. Battery cables aren’t compromised… the ignition switch would be the only other thing it I think I read once there is a solenoid that goes bad a bit🤷♂️. Thanks! Slowly but surely! Moving right along. Cheers!
Hey Mike - Jazzy sits out in the elements year round I believe…I know you winterize and cover the equipment during winter months…do you do anything to minimize the elements taking a toll on your equipment during the warmer months?
Hey Mike! I wanted to ask about the truck. How has it been on maintenance and fuel? Im assuming driving it everyday youre racking up a good amount of mileage. This was a rig im interested in so id love to have a rough idea of what to expect!
Before you built the rig for your daughter, did you have a back up plan if your truck itself had a major issue and was out of commission? A triailer is a pain sometimes, but if i have truck issues, i knowvincan rent or borrow another truck and still work. Thats my fear of a truck only rig.
@@TheFreshRinse usually when rectifier goes bad it can drain the battery…is battery at right voltage? Also the rectifier should be in open air not covered or inboxed for cooling purposes…not sure if yours is, but if it isn’t I would mount in the open. They do get warm in the process of charging….thought I’d pass that along. Love the videos.
i asked this question a video or two ago and you made a typo and i wasnt 100% sure your answer was what you meant it to be. Is that green hose Jetter hose?
@@TheFreshRinse 😂😂 I can see Joe saying that! I’ve spoken to Joe a few times on the phone when i was looking for some guidance, he’s a good guy as are you Mike!
I had same issue last week with my machine. It turned.out to be a bad negative wire from my battery causing issues . 8 dollar fix. Maybe you can be as blessed as i was. Pray you get it fixed for cheap.
Hey Mike, this comment is off-topic of the video. It does worry me that you do not wear gloves while using your 12v pump. As a fellow washer I get wearing gloves/mask on every job makes you not want to alarm the customer and raise concern to what you are spraying. But you should re-visit this with a focus on the longevity of your health. Thank you for all your content I appreciate you.
Doesn’t the ix800 have the ODB port that you can plug into and it gives you a readout like a car telling you what’s wrong? Thought that was supposed to be the benefit of the new ix800 model. 🫤
Amazing Video Brother
Thank you sir
There is a fuse behind the key start switch. They corrode sometimes without blowing. I replaced with a reset breaker.
Thank you brother
Great work! Nice property!
Thank you. Yes, very.
Mike always with the positive attitude, even through adversity! complete role model
Oh man, thank you sir!
Nice! love that mini mondo
It’s a work horse
Great vid! For someone still learning impressive how you knock those jobs out!!! I wrenched for yrs in a previous life and was svc manager for 12. Still figuring out how to work on these machines tho. Hope you get sorted quickly!!!
Thank you for watching brother. You got this!
@@TheFreshRinse other than solenoid mentioned. Battery cables aren’t compromised… the ignition switch would be the only other thing it I think I read once there is a solenoid that goes bad a bit🤷♂️. Thanks! Slowly but surely! Moving right along. Cheers!
Nice work
Thank you!
I’m of the opinion that you should run 4” of surface cleaner per Gpm i.e. 8gpm should push ~32”, 5gpm/20”, etc.
Nice job Mike!
It works… just not as good as the 10 GPM. Thank you.
Great video! Make a video fixing 10 gallons..
I may just do that. Thank you for the request!
Fresh video bro pun intended
BOOM!
Mike i enjoyed the video. But may have enjoyed the old truck on site. Looked like maybe 52-54 chevy.
It was super cool
I run a 28” hydrotwister on 5.5 gpm gear drive with no problem.
Very nice!
Hey Mike - Jazzy sits out in the elements year round I believe…I know you winterize and cover the equipment during winter months…do you do anything to minimize the elements taking a toll on your equipment during the warmer months?
Not so much. I don’t have any way to cover it.
There is a 30 amp fuse behind the key switch. And check the ground rectifier won't cause hour meter not to work
Thank you good man.
I expect a full report in the morning 😆 🤣
Hey, Mike, you might wanna check the solenoid valve on the 10gpm ? just an idea
Thank you my brother!
Hey Mike! I wanted to ask about the truck. How has it been on maintenance and fuel? Im assuming driving it everyday youre racking up a good amount of mileage. This was a rig im interested in so id love to have a rough idea of what to expect!
Gas mileage is terrible. Because it’s for work only, the mileage is quite low. Thankfully
average wash day. love it
BOOM!
Before you built the rig for your daughter, did you have a back up plan if your truck itself had a major issue and was out of commission? A triailer is a pain sometimes, but if i have truck issues, i knowvincan rent or borrow another truck and still work. Thats my fear of a truck only rig.
No, not so much. Spray and pray. LOL
Mike where is the AR 45 you had on your trailer,figured you would have put it on jazzy.
I need to do some repairs. Then install it. Just no time. That’s a good problem
The Fresh Rizz
In d-houz!
Would you recommend 2 -10 gpm Machines or one 8 and one 10
@@michaelkus8869 One 8 and one 10. I like my setup
Mike how are you pricing the driveway and are you using a measuring wheel or Google earth?
I use Measure Map Pro.
.25 - .30
@@TheFreshRinse
Did you check the fuse I’m assuming?
Yes. Great question.
@@TheFreshRinse usually when rectifier goes bad it can drain the battery…is battery at right voltage? Also the rectifier should be in open air not covered or inboxed for cooling purposes…not sure if yours is, but if it isn’t I would mount in the open. They do get warm in the process of charging….thought I’d pass that along. Love the videos.
Hey Mike, my comment had Links to all the manuals for you (or anyone) hope you can still see it on your side, it got bumped. 😉
I can see your comment… but no links. Thank you for the extra effort!
Fresh rinse 😊 do you use sh on the deck?
Yes sir. Spray SH, let it dwell, then rinse.
My names Tim... 😮
Loser! LOL
i sense a viewer spike at a certain part of this video, ill give you a hint.... LEGS 🤣
Gulp!!!!
i asked this question a video or two ago and you made a typo and i wasnt 100% sure your answer was what you meant it to be. Is that green hose Jetter hose?
Yes. From Amazon
what percentage are you getting with a 10 gpm downstreaming with a 1.8
I do not use the 1.8 with the 10. In my opinion, 2.1 is the lowest. Probably 15/1
I’m jealous of your legs and jazzy. The longer I yank a trailer around half of North Carolina the more I want a flatbed
I hear you. It’s just so much easier.
Mike, get yourself a multimeter ✌️
Yup. Have one. That’s how I know it sucked the battery dead.
@@TheFreshRinse that'll do it 👍
I don’t have any friends. Well Joe D is my friend but he doesn’t know we’re friends lol 😂😂😂
I talked to him. He said he doesn’t want to be friends with anyone.
@@TheFreshRinse 😂😂 I can see Joe saying that! I’ve spoken to Joe a few times on the phone when i was looking for some guidance, he’s a good guy as are you Mike!
Why didn't you clean the oil spot?
Did to the best of my ability
@@TheFreshRinse Thought it might be a million dollar stain....LOL!
I have o-rings burst every 20 mins lol
Ugh!
I had same issue last week with my machine. It turned.out to be a bad negative wire from my battery causing issues . 8 dollar fix. Maybe you can be as blessed as i was. Pray you get it fixed for cheap.
Awesome! How did you know?
@TheFreshRinse I grounded the starter and jump across the bending and it started. The good Lord led me that way. I am not a good electrical mechanic
Hey Mike, this comment is off-topic of the video. It does worry me that you do not wear gloves while using your 12v pump. As a fellow washer I get wearing gloves/mask on every job makes you not want to alarm the customer and raise concern to what you are spraying. But you should re-visit this with a focus on the longevity of your health.
Thank you for all your content I appreciate you.
Ah man, thank you for your concern. I’m super grateful!
It sucks you have to use the 8, when I'm over here using a 5 on every job
My life is horrible
Baahaaa I was thinking the same think I for the 5 as well and I did a little over 4000 square feet today and it took me almost half the day
@@TheFreshRinse stop crying.... some one always got it 2x worst then u
And this is why I stayed away from the new Honda
Your right I was just kidding around the 5 is better than nothing and hopefully sometime I’ll go up to an eight nice video
I Liked, Subscribed, and Hit the Bell Tab! You are welcome, your channel needed my help, lol. Your favorite, loser friend, Brian
You are prolly the only real friend I have. 😂
Thank you
I Love You Too Man! ❤️👍🏻👊🏼💥
There u go u only need the 8 job did 😂
Yes. It worked. Give me back my 10! LOL
Doesn't look like you are skipping leg day!
Walking a bit slow, for sure.
“Loser friend “
Yup
I have a loser friend, his name is Mike!
That one hurt, bad!
Doesn’t the ix800 have the ODB port that you can plug into and it gives you a readout like a car telling you what’s wrong? Thought that was supposed to be the benefit of the new ix800 model. 🫤
I’m not sure. I’ll look into that. Thank you.