I have an Audiopipe 1800.1d amp which is 10 years old and I'm on my third set of 15 inch Audiopipe subs but the amp is running like a champ still after a decade.
I’m sure this is not the greatest quality amplifier in the world, but 2000 W for $190. That’s a freaking steel. I’m an old school car audio guy. $190 used to buy me a Jensen that would do about 93 Watts. That being said when it came time to buy an amp I did not buy cheap. I have a DD audio M5 running 8 12’s at .5 ohm and it has never went into protect. Not once. If I was ever looking to do a budget system audio pipe would certainly be something I would consider. I’ve seen a few tests on these. One by big D also. They seem pretty damn good to me. Keep up the good work man. Love your videos.
@@glenfrancois6813 less than halfway but i got a bass knob for that kick and i tell u wat i jus fried my 2 ap 4stacks now im going with two ap 4stack 15s or kicker 15s rhino box that wood does not last with this amp
This video convinced me to buy one 3 years ago and I just started using it with a zvx8d4. I'm liking it so much I got a second sub to get down to 1ohm.
I have three 8” skar powered by the audio pipe 1800 wired down to .5 ohm. And I’ll put those 8’s up against any pair of 10’s,12’s any day. The sound is unbelievable.
You monetized now? Congrats brother!! Long time coming, good work. I almost ordered the infiity on the back of your review (2 of em) but i got a deal on an alpine pdx wich stacks w my existing amp. You saved me (and my eletrical) from what looked like a good deal on an mtx, but it would not have been as efficient as i needed.
Man im so glad you showed that tip about this amp not likeing the gain being up to high . I have this amp on a hdc3 18 d2. and set gain with multimeter , but when I really pushex it it allways nade my subs coul a lil bit smelly ... so after watching this vid I took your advice about setting the gain , and today I tried to get the sub stinky ,never happend just pounded and pounded never got hot . Im so glad maybe O wont blow my sub now , I have blown every sub I ever had. but I beatcon them ever day hard.
So how high did u have the gainset and can h set the gain with a multi meter in this amp or no cause I have it powering a RS platnium 18 and I just feel like it should be louder
Just picked up this amp and boy does it push my Sundown SA-12 hard. Switched from a 750w (@2ohm certified) NVX to the 1800 which pushes about 1100w @ 2ohm and the difference was noticeable. Ill have the option to add a 2nd sub down the road too with the power this thing makes. Great value.
Thing thats selling me on this amp... "amp stayed cool the whole time, no heating issues, a little bit better efficiency, a little bit better thermally"
I just ordered this one, these Dyno videos are double edge sword. When they do good the brand Jack's the price up alot. I just paid $234 vs $180, pioneer just raised the price of the 9701 to $284 from $135 I paid about 6 months ago I was going to add another and gain match em but it's a steal at $135 but not so much at $285 it's only 1200wrms and no subsonic and you can't strap them. I could buy 2 AP 1800 for $400! And it's over 1800wrms and has subsonic and it's strapable. Way better value that the pioneer which I was able to overheat an put into protect, I was pushing it and very possibly clipping it some on two AB XR15s
The wolfram's are the poster child for this scenario... They were priced very atractivly until he did the test and lost his mind which hey it did great and priced low but they got some attention and now there grouped in with the nose up "premium" brands with a steep price tag. My recent attention it towards TORO Tech, I have one of there little monoblocks n it's nice and only $80 Im looking at there R6 it's rated at 3.2k @1 ohm (4k at a claimed stable .5...?) to replace my AP 1800 I love it plenty of sack but just not quite big enough for my subs. I would love to see a dyno on the TORO R6 first tho but when it's available again in November I'll probably still grab it.
Had one. Ran a pair of sundown sa12 on it. Pounded well but had a track with a serious low and I'd get a pop every time on that part of the track. Was at 1 ohm. Needs full time fans. Gets hot. Moved to Wolfram. Happy since.
Nice review and good to see Audiopipe putting out some decent power. I just wish they changed the design and removed those hideous circular embellishments.
Because in that case it wouldn't even matter about voltage considering stock battery and alt probably won't produce nearly enough amperage to perform correctly so voltage won't play much of a part
Will this amp be enough to power my sundown zv3 18 ...I had on a aq 3500.1 before 4300rms @1ohm but after box rise mybe 2k was doing 148....it will be in sealed now I don't have the money for the electrical so I have to use lower watt amp hope this does the job
sure get you 1 i always never listen to people's opinion I do my own research and go off of my own experience I've had 6-7 Audiopipe amps 2000 1d 1500 1d 1800 1d 3000 1d never had any issues never.
That's a nice machine. I just wonder if it's the same thing, kinda redundant as the APMI 2k which you can find for $170. What's the difference between the two? Thanks as always for your work. You're a solid fella. Appreciate!
I bought this amp a year ago based on this review ! It’s been great I have it pushing 2 Audiopipe bd3 10”s and I was wondering if I can get it to push 3 of them?? I know it’s technically too much it would roughly be 2100 watts and the amp is 1800. So I was thinking of getting a smaller amp just for the extra 10 but I was wondering if it would be ok to use my 1800 still
I have a APDL1-16001D rated 600@4 ohms 950@2ohms 1600@1 ohms. I opened it up to look at it and the board say APCLE 1500 the heat sink is almost the same it spells AudioPipe out not AP and the grills are black not grey. Decent power IMO
Y'all need to put some respect on that audio pipe.. HAVE YOU SMOKING ON THIS HERE AUDIO PIPE! AUDIO GOT You RIGHT! AUDIO PIPE GOT MY RMS HIGH AS A KITE!!! 😅😂🤯
I have a question and I'm kind of new at this what is the difference between certified and uncertified? Also what do you mean when it says dynamic? Thanks
? I’m trying to run 8 highs, (4) 6.5s(rms at 125 each) 4 6x9s (rms 250 each, Max 500 a speaker) while also running 4 12’s(1k rms each speaker) which 4 and mono amps would you recommend for me ? I was originally going with a 2,500 4 channel audiopipe, and 4K audiopipe for the bass.
Hey dude I was just looking on let go and I saw an amp I forgot about, and would love to see you get one for an amp dyno, its the Re audio se 4000 d class amp its like anywhere from 150 to 259, i got to see if that thing does rated !! They also claim its made in korea!!! So if you could please get one and lets see what it can do!!!!
Dam decent power. I wonder what my AudioPipe APDL1-16001D mono amp would do hopefully decent power like this one. My AudioPipe amp has Tiffany style RCA's. It has 2 outputs for subs and is 1 ohm stable. Haven't seen really any info on my amp seen the 1500, 1800, and I believe the 2000 but nothing on utube. The AudioPipe APDL1-16001D is rated at (4 ohm 650)- (2 ohms 1000) and (1 ohm 1600) at 1%distortion but I've never been able to really test my stock electrical system is weak
Ryan Blankenship.. Question, would it be safe to have two 4ohm svc woofers and a 2ohm woofer to make a 1ohm load on an amp?? It would be in a three 12in box with the 2ohm woofer in the middle
i got this amp on 3 sundown sa 8 v3's at 1.33 ohms, in 2.25 cubes... she gets down.. this amp did way better thermally than the 1500... i got the 2004 for sundown sa components and coaxials.. havnt hooked that up yet... hopefully it dont blow...
Do you think you coukd test an untouchables sounds amp? Supposed to be korean boards. Those who say they have them like em but dont know alot of info on them
I don't understand, ok so what is the difference between this Audiopipe APCLE-18001D and the Audiopipe APMI-2000. Similar prices, similar power. They both are mono amps, both say class D. I am confused, help please.
+catch22frubert I know, I'm still within my 30 days, so I can still return it.. I've had it boxed up ready to ship back for 2 weeks now.. I just can't seem to do it.. it's a powerful budget gem for sure, but I like the skv2.2500 clipping light an being able to strap if needed, and rca output plus the Korean board sold me.. there both built very well tho.. the sk series is just a lot bigger and harder to tuck away..
tankdog03 I got to use my RP 2k well over a year, and it held up well, but I upgraded to the Korean made Orion Xtr 2500.1dz. Now I need to build a lithium battery and I can support a 2nd Xtr 2500 to strap.
@@twistedmistersartz i got the rp1500 pushing a soundqubed hds3. I like the little amp but i kinda wanns upgrade. Skar bench tested it at 1300rms @14.6v i know I'm not getting near 14.6v consistently. So I'd guess I'm getting 1100-1150 out of it
I have heard that this amps was good. the place that sells them be close on the weekend here in my home town. so I have to travel at least one hour to get find one . the problem that I have is when you go out of town prices tend to almost double. I am guessing that it may be worth the wait is to catch my local store open
If you are having issues, I would look at the install and your settings... the Apmi2k can have heat issues, havent heard of cooling issues with the APCLEs if installed properly
Gilitar 14.14 is a perfectly good finishing voltage. There is nothing to fix. If you learned a tiny bit of math, you could correct for any voltage you want. It took me 2 seconds on my phone calculator to correct for 16 volts. Easy peasy
Great video Ryan, asking everyone the same question as I'm old school. Amps under 500 bucks at around 3000 watts n don't care if it reaches that dynamiclly. Which amp would you recommend? I am leaning towards the Orion xtr2500.1 but would love the feed back. I'm just not up on the new amps China vs Korea. Any suggestions would really help with my decision making. Power 2 psi level 2 upgraded 18's.
+Ryan Blankenship (Blank) I got the skar skv2-2500.1d for 499 and it's very nice, got all the power I pd for.. I run right at 14v most the time.. but I like lower volume deep hard hitting bass, the rp2000 didn't do it as well
dan daves You should consider strapping two amps together. Two of the new Wolfram C-2400's strapped for $400 shipped! Or two Soundqubed S1-2250's strapped for around $500. Both combinations can do over 4500 watts RMS and have clip lights on the bass knob. Both are good. Also, Skar RP-3500.1 is $449. Very decent.
+catch22frubert skar rp series is China boards but the sk & skv2 are korean.. I got the skv2.2500 clipping indicator is sweet, plus on good electrical it will push 2900w easy at 14.4 and this amp will accept upto 16volts so I'm pretty sure it can run @.5 ohm on good power all day.. I'm just pushing 1 1500w rms 12in vxf and it moves and get low
tankdog03 I was aware the RP series is Chinese. I own a RP 2k, and it treated me very well for over a year. Your setup sounds solid. I've been looking at the VXF 15's as an upgrade for my current setup, which is an Orion Xtr 2500.1dz on 2 American Bass XR 12's. I have good power, but I desperately need more cone area. 12's just aren't enough for an SUV.
if you can find 1 Get the Audiopipe Apcle 2000 1.d or the Audiopipe Apmn 2000 1.d my cousin got 4 Audiopipe BD2-12's in a custom built ported box tuned at about 34 or 35 hertz on Audiopipe 2000 Apcle & my mom hates when he rides by or pulls up 😂😂🤣🤣 but make sure you get a High-Output Alternator a 0 gauge Amp Kit and a Second Battery with at least 800-1000 Cranking Amps.
singram1978.... Ok thanks for tip.....im really considering this amp, the Apmi-2000, apcle-1500, and the Fosgate Prime r1200... I know the Prime would be the most efficient.... So do a big 3 and add battery such as XS or yellow top optima?
Yes... Stinger, XsPower, is what i would recommend over a yellow top.... if that is the route you wanna go i would put a yellow top under the hood and a different battery in the trunk. Also look into NorthStar batteries, and Energie batteries. www.gpcaraudio.com or www.sonicelectronix.com
When my intake series blew channel by channel i vowed to never get another, but these are a different animal! 4 ohms usually tells the story but in this case FTW!
I have an Audiopipe 1800.1d amp which is 10 years old and I'm on my third set of 15 inch Audiopipe subs but the amp is running like a champ still after a decade.
Been running this amp 5 years no issues 😊
Audiopipe is to be respected when it comes to the big amps. AudioPipe for the WIN!!!!!
Im running one off these for almost 9 months. And it is so awsome worth every penny.
Does it get hot
What you using in .5 or 1 ohm
Audiopipe is tried and found true as a good 👍 amp I feel they have earned there place as a True Gem 💎
I’m running this amp on 3 skar 8” inch subs. I’m very impressed sounds awesome good hard hitting bass.
I’m sure this is not the greatest quality amplifier in the world, but 2000 W for $190. That’s a freaking steel. I’m an old school car audio guy. $190 used to buy me a Jensen that would do about 93 Watts. That being said when it came time to buy an amp I did not buy cheap. I have a DD audio M5 running 8 12’s at .5 ohm and it has never went into protect. Not once. If I was ever looking to do a budget system audio pipe would certainly be something I would consider. I’ve seen a few tests on these. One by big D also. They seem pretty damn good to me. Keep up the good work man. Love your videos.
I Have this amp pushing 2 American bass elite 12s and it does the job. Great amp for the money
I got this amp on 2 12AP 4stacks n a custom built box n it beats my 16 charger wit no mercy this thing is a beast 💯
What do you have your gain set at???
@@glenfrancois6813 less than halfway but i got a bass knob for that kick and i tell u wat i jus fried my 2 ap 4stacks now im going with two ap 4stack 15s or kicker 15s rhino box that wood does not last with this amp
My amp is pulling a lot of juice and it's making my fuse by the battery real hot...
I have 4 gauge power and 0 gauge ground... But it's like my amp is getting real hot
@@glenfrancois6813 your suppose too have 0 gauge power and ground and good voltage, make sure you got good name wire as well
This video convinced me to buy one 3 years ago and I just started using it with a zvx8d4. I'm liking it so much I got a second sub to get down to 1ohm.
I have three 8” skar powered by the audio pipe 1800 wired down to .5 ohm. And I’ll put those 8’s up against any pair of 10’s,12’s any day. The sound is unbelievable.
You monetized now? Congrats brother!! Long time coming, good work. I almost ordered the infiity on the back of your review (2 of em) but i got a deal on an alpine pdx wich stacks w my existing amp. You saved me (and my eletrical) from what looked like a good deal on an mtx, but it would not have been as efficient as i needed.
Ryan Blankenship Hey congrats!
Man im so glad you showed that tip about this amp not likeing the gain being up to high . I have this amp on a hdc3 18 d2. and set gain with multimeter , but when I really pushex it it allways nade my subs coul a lil bit smelly ... so after watching this vid I took your advice about setting the gain , and today I tried to get the sub stinky ,never happend just pounded and pounded never got hot . Im so glad maybe O wont blow my sub now , I have blown every sub I ever had. but I beatcon them ever day hard.
So how high did u have the gainset and can h set the gain with a multi meter in this amp or no cause I have it powering a RS platnium 18 and I just feel like it should be louder
Toss Up! A 200-300w difference at 1ohm
Apmi-2000 ~ 1900w certified/2300w dynamic
Apcle-1800 ~ 1700w certified/2000w dynamic
Just picked up this amp and boy does it push my Sundown SA-12 hard. Switched from a 750w (@2ohm certified) NVX to the 1800 which pushes about 1100w @ 2ohm and the difference was noticeable. Ill have the option to add a 2nd sub down the road too with the power this thing makes. Great value.
Broke the rated @ 2ohm good job AUDIO pipe i never owned your products but i can definitely make some room !
Im a new fan myself....just did the whole car.....she bangs!!!
I have this amp pushing a single sound qubed 18 d2. its makes my stering collum move around.
Hey alan ray, no overheating issues wit this amp?
@@billylamontholder never
@@billylamontholder i had a 3k kill 2 orion hcca one at a time
Billy Holder mine gets pretty hot sometimes, although my voltage drops pretty low as well... I think that's the problem.
I’ve got better grounds and more power and it’s not getting as hot at all. It’s good.
Thing thats selling me on this amp... "amp stayed cool the whole time, no heating issues, a little bit better efficiency, a little bit better thermally"
It gets warm though for sure
@@Jason_Voorhees. well, I’ve definitely looked past this amp. There’s been so many great ones made later on with much better efficiency.
I just ordered this one, these Dyno videos are double edge sword. When they do good the brand Jack's the price up alot. I just paid $234 vs $180, pioneer just raised the price of the 9701 to $284 from $135 I paid about 6 months ago I was going to add another and gain match em but it's a steal at $135 but not so much at $285 it's only 1200wrms and no subsonic and you can't strap them. I could buy 2 AP 1800 for $400! And it's over 1800wrms and has subsonic and it's strapable. Way better value that the pioneer which I was able to overheat an put into protect, I was pushing it and very possibly clipping it some on two AB XR15s
The wolfram's are the poster child for this scenario... They were priced very atractivly until he did the test and lost his mind which hey it did great and priced low but they got some attention and now there grouped in with the nose up "premium" brands with a steep price tag. My recent attention it towards TORO Tech, I have one of there little monoblocks n it's nice and only $80 Im looking at there R6 it's rated at 3.2k @1 ohm (4k at a claimed stable .5...?) to replace my AP 1800 I love it plenty of sack but just not quite big enough for my subs. I would love to see a dyno on the TORO R6 first tho but when it's available again in November I'll probably still grab it.
I just bought this amp thanks for the tune settings💯
Nice video but I was wondering the efficiency on that amp
Helly yeah, 3 kickers 2@ series .3 load 0gauge sealed on a battery it hits hard but thinking a ported box would mske it sound better get the job 👌
Could you please test the new Audiopipe APHD 3000D- H1 mono amp.
Got one of these to push my 2 xfl 15 at 1 ohm... I'm very happy with it for being only 220 bucks.
Had one. Ran a pair of sundown sa12 on it. Pounded well but had a track with a serious low and I'd get a pop every time on that part of the track. Was at 1 ohm. Needs full time fans. Gets hot. Moved to Wolfram. Happy since.
I have a friend that’s running this amp @0.67 on the 3 15 CVR dual 4 with no problem
Nice review and good to see Audiopipe putting out some decent power. I just wish they changed the design and removed those hideous circular embellishments.
Not too bad. But for a couple more bucks you can get that Wolfram..
Ryan Blankenship Oh I know. That Wolfram, if it turns out to be as good when the production models come out, may have changed the game!
also APMI 2000.1D IS 10 dollars less and does more power
Josh Kyte touche
Josh Kyte touche
Goku Son I've got my apmi at 0.4 for the last 8month's and still kickin
Great video, keep up the good work!!!
Ok Audiopipe, i see you. Putting up just under 3000 at 5 ohms.
why not testing at 13,5 or 13,8 volts. we never get 14,4 volts with stock alternator and batterie
my stock alt sets at 14.5 then when im pounding my sub it drops to 13.4 or so.
this is just max power testing in a controlled envviorment
I def hover at 14-14.4. Cools start about 14.7 lol
Get a High Output Alternator with the second Battery 1/0 or 0 gauge amp wiring kit and Do a Big 3!
@@randywatson4870 sure, and then buy this cheap junk amp😂
What’s the ideal voltage for this amp just got it this video motivate me to get it looking to put in a suburban
I swear the 1500 did just as good and they're like the same price
What song is this? I always watch your channel and love it by the way!! Always wanted to know what song/instrumental is this while you test amps?
Another great video sir.. good job Audiopipe..
Because in that case it wouldn't even matter about voltage considering stock battery and alt probably won't produce nearly enough amperage to perform correctly so voltage won't play much of a part
It made it's power and even stayed 72% efficient certified. Not bad. I don't blame you for not doing half ohm.
Ryan Blankenship It's just too stressful to run half ohm daily. I'd rather not gamble on it every time I turn up the volume.
Awesome Ryan. Enjoy the videos.
This is like the most efficient amp you have tested.
Ryan Blankenship can I send you the audiopipe apmi 4150 to review?
i noticed the amp will run 16 volt on the box like to see what it would do at that voltage
Will this amp be enough to power my sundown zv3 18 ...I had on a aq 3500.1 before 4300rms @1ohm but after box rise mybe 2k was doing 148....it will be in sealed now I don't have the money for the electrical so I have to use lower watt amp hope this does the job
Anyone know what size alternator I would need for this amp and the audio pipe 2000 x 4 ?
I have an Orion 1500.1dz and I love it so far, do some new Orion extreme stuff
The new Orion's are Savage. The I believe 3k put out over 10-12k at .5 burst.
Ryan no money shot today darn I love seeing the guts just to see what components they are using.
I've been running my apmi2000 at
0.4 ohm for 6 months now and no problems
At what voltage?
Howd that do for you?
@@cheyon22 14.8v
@@herlemaggard69 fine just got to keep a fan on it
@@KnowName33 bet, thanks dude
Would this a be a good amp for 2 bd3 10s DVC 4ohm subs, the subs are rated at 1400w max a piece.
sure get you 1 i always never listen to people's opinion I do my own research and go off of my own experience I've had 6-7 Audiopipe amps 2000 1d 1500 1d 1800 1d 3000 1d never had any issues never.
@@randywatson4870 i got the subs and amp and it is a perfect fit.
@@humblegcoupe5608 👍🏾
That's a nice machine. I just wonder if it's the same thing, kinda redundant as the APMI 2k which you can find for $170. What's the difference between the two? Thanks as always for your work. You're a solid fella. Appreciate!
I bought this amp a year ago based on this review ! It’s been great I have it pushing 2 Audiopipe bd3 10”s and I was wondering if I can get it to push 3 of them?? I know it’s technically too much it would roughly be 2100 watts and the amp is 1800. So I was thinking of getting a smaller amp just for the extra 10 but I was wondering if it would be ok to use my 1800 still
It would definitely work, it puts out closer to 2k anyway, they would all almost be getting full rms go for it
I got 3 Audiopipe Bd3s on a Taramps md 1800 at 2 ohms but I'm going to give this amp a try to have all Audio pipe
@@marcotanayo2820 1ohm stable this amp performs
I have a APDL1-16001D rated 600@4 ohms 950@2ohms 1600@1 ohms. I opened it up to look at it and the board say APCLE 1500 the heat sink is almost the same it spells AudioPipe out not AP and the grills are black not grey. Decent power IMO
Y'all need to put some respect on that audio pipe.. HAVE YOU SMOKING ON THIS HERE AUDIO PIPE! AUDIO GOT You RIGHT! AUDIO PIPE GOT MY RMS HIGH AS A KITE!!! 😅😂🤯
I have a question and I'm kind of new at this what is the difference between certified and uncertified? Also what do you mean when it says dynamic? Thanks
@@bigblank69 thank you
? I’m trying to run 8 highs, (4) 6.5s(rms at 125 each) 4 6x9s (rms 250 each, Max 500 a speaker) while also running 4 12’s(1k rms each speaker) which 4 and mono amps would you recommend for me ? I was originally going with a 2,500 4 channel audiopipe, and 4K audiopipe for the bass.
Looks like the amp is most comfortable at a 2 ohm load
crazyjr nope runs 1 flawlessly
I enjoy your videos. I have two 15s kicker comp VR what would you recommend under 200 bucks?
I think he stated that on the video on the 200 bucks is the MI 200 bucks for the 1800
Great vid as always. The link for the T-shirt’s doesn’t go to the product.
Hey dude I was just looking on let go and I saw an amp I forgot about, and would love to see you get one for an amp dyno, its the Re audio se 4000 d class amp its like anywhere from 150 to 259, i got to see if that thing does rated !! They also claim its made in korea!!! So if you could please get one and lets see what it can do!!!!
How many watt do you think if I strap 2 of these and ran it at 2 ohm?
Dam decent power. I wonder what my AudioPipe APDL1-16001D mono amp would do hopefully decent power like this one. My AudioPipe amp has Tiffany style RCA's. It has 2 outputs for subs and is 1 ohm stable. Haven't seen really any info on my amp seen the 1500, 1800, and I believe the 2000 but nothing on utube. The AudioPipe APDL1-16001D is rated at (4 ohm 650)- (2 ohms 1000) and (1 ohm 1600) at 1%distortion but I've never been able to really test my stock electrical system is weak
I really enjoy this channel!
Ryan Blankenship.. Question, would it be safe to have two 4ohm svc woofers and a 2ohm woofer to make a 1ohm load on an amp?? It would be in a three 12in box with the 2ohm woofer in the middle
Ryan Blankenship ok thanks for the tip...
How efficient are these amps? I have been told they take a lot of power to run them.
goo amp
i got this amp on 3 sundown sa 8 v3's at 1.33 ohms, in 2.25 cubes... she gets down.. this amp did way better thermally than the 1500...
i got the 2004 for sundown sa components and coaxials.. havnt hooked that up yet... hopefully it dont blow...
Do you think you coukd test an untouchables sounds amp? Supposed to be korean boards. Those who say they have them like em but dont know alot of info on them
Ryan Blankenship be sweet if he would send u one. Ive been considering a 5k. Those korean boards seem preety good from the ones ive seen u test
the amps are nice from what i seen i have a 15" king sub and i must say i love it
euphorikfay i have 2 15in kings aswell. Ive got a 2k apmi on them and they slam for hardly even being powered. Im just curious about amp now
Luech is good people too
This amp should do better then that can you test it with higher voltage please
Hey man what do you do with the amps that you test?
Some I sell, some I keep, some I return
I have this amp on 2 jl 12 w6 v2s now because my jl 500/1s the slope button is acting up i had this 1800 amp in my truck on a hcca 15.4
Great video 👍 thank you sir
The amp comes with a 120amp fuse, but this video clearly shows the amp using 230amps+ What am i missing?
Mines gets hot sometimes and shuts off then eventually comes back on
What model is your power supply and where can I get one?
Would be great if you could test the power Acoustik gt-6000d it's 199.00 shipped
Still love my orion amps!!!
I run mine at .5ohm all day had it 3 yrs now bumping 2 15 in mofos
Blankenship = Boss... no, wait... I mean he's the power in acoustics... Ok can we all agree he's a BAMF.
So if I had two dual 2 ohm subs they will receive 600 watts a piece or 1200 watts a piece?
I wanna know too
This new APCLE 1800.1 D is compatible with 16 volts why touch base on that subject? That may have changed some numbers?
What should I set the low pass filter in the sub sonic on
Not bad thinking on
Running this amp on 2 skar audio svr d4 15s
1800 more efficiency
Vid is fine, background music was too loud and unnecessary, and it made it hard to hear the speaker.
I don't understand, ok so what is the difference between this Audiopipe APCLE-18001D and the Audiopipe APMI-2000. Similar prices, similar power. They both are mono amps, both say class D. I am confused, help please.
Apcle is better
That's two amps that blue on four bd3s at 2 ohm turn 25% up
Sucks about tha 4 channel, I've been runnin that same amp for more than a year with no issues
cdubBbasshead Maybe he got a dud on the 4 channel. It happens.
Is this too much amp for a single Fi Q12 with high qts in a sealed box?
Question I need to buy 1 12 L7 kicker to go with this amp what size watt L7 should I get plz help
Orion XTR1500.1 or Audiopipe 1800.1 APCLE. . WHICH ONE IS BETTER?
orion is but it’s double the money for the same power
High output In a tiny space that is not a small. Amplifier
I'll stick to my skar skv2.2500 lol
I have the skar rp2000 also.. it's an awesome amp but I don't use it, it's collecting dust
tankdog03 I have a Skar RP-2k collecting dust as well. It's a good little budget amp, but I just can't use it right now.
+catch22frubert I know, I'm still within my 30 days, so I can still return it.. I've had it boxed up ready to ship back for 2 weeks now.. I just can't seem to do it.. it's a powerful budget gem for sure, but I like the skv2.2500 clipping light an being able to strap if needed, and rca output plus the Korean board sold me.. there both built very well tho.. the sk series is just a lot bigger and harder to tuck away..
tankdog03 I got to use my RP 2k well over a year, and it held up well, but I upgraded to the Korean made Orion Xtr 2500.1dz. Now I need to build a lithium battery and I can support a 2nd Xtr 2500 to strap.
Either of you wanna dump the rp? 😁
@@twistedmistersartz i got the rp1500 pushing a soundqubed hds3. I like the little amp but i kinda wanns upgrade. Skar bench tested it at 1300rms @14.6v i know I'm not getting near 14.6v consistently. So I'd guess I'm getting 1100-1150 out of it
Love the song bump bump hey!!!
I have heard that this amps was good. the place that sells them be close on the weekend here in my home town. so I have to travel at least one hour to get find one . the problem that I have is when you go out of town prices tend to almost double. I am guessing that it may be worth the wait is to catch my local store open
or just buy online
The hair on your screen I saw online that they were 50 dollars cheaper than my local store
@billy holder yes I’m having overheating issues that’s why I’m here in the comment section. Making me think about trashing audiopipe all together
If you are having issues, I would look at the install and your settings... the Apmi2k can have heat issues, havent heard of cooling issues with the APCLEs if installed properly
I have the class d 1600w monoblock set on 40hz and -12db with a secondary battery
@@hustlingambition8972 which model?
APDLI-16001D
Mine cuts out....??? Whats wrong?
GEM
Mr.Ryan how a about overheating do you know tanks.
If you're trying to determine if an amp is under or over rated you need to fix that voltage.
Gilitar 14.14 is a perfectly good finishing voltage. There is nothing to fix. If you learned a tiny bit of math, you could correct for any voltage you want. It took me 2 seconds on my phone calculator to correct for 16 volts. Easy peasy
catch22frubert thinking the exact same thing or even if Iu have jus seen a few u could guess around were it would it should be at!
Does the amp brings a fuse?
Great video Ryan, asking everyone the same question as I'm old school. Amps under 500 bucks at around 3000 watts n don't care if it reaches that dynamiclly. Which amp would you recommend? I am leaning towards the Orion xtr2500.1 but would love the feed back. I'm just not up on the new amps China vs Korea. Any suggestions would really help with my decision making. Power 2 psi level 2 upgraded 18's.
I should mention the last system I put together was in 2003 so technology had came leaps since then.
+Ryan Blankenship (Blank) I got the skar skv2-2500.1d for 499 and it's very nice, got all the power I pd for.. I run right at 14v most the time.. but I like lower volume deep hard hitting bass, the rp2000 didn't do it as well
dan daves You should consider strapping two amps together. Two of the new Wolfram C-2400's strapped for $400 shipped! Or two Soundqubed S1-2250's strapped for around $500. Both combinations can do over 4500 watts RMS and have clip lights on the bass knob. Both are good. Also, Skar RP-3500.1 is $449. Very decent.
+catch22frubert skar rp series is China boards but the sk & skv2 are korean.. I got the skv2.2500 clipping indicator is sweet, plus on good electrical it will push 2900w easy at 14.4 and this amp will accept upto 16volts so I'm pretty sure it can run @.5 ohm on good power all day.. I'm just pushing 1 1500w rms 12in vxf and it moves and get low
tankdog03 I was aware the RP series is Chinese. I own a RP 2k, and it treated me very well for over a year. Your setup sounds solid. I've been looking at the VXF 15's as an upgrade for my current setup, which is an Orion Xtr 2500.1dz on 2 American Bass XR 12's. I have good power, but I desperately need more cone area. 12's just aren't enough for an SUV.
i have two audiopipe BD2-12 what would be a good quality amp for them
if you can find 1 Get the Audiopipe Apcle 2000 1.d or the Audiopipe Apmn 2000 1.d my cousin got 4 Audiopipe BD2-12's in a custom built ported box tuned at about 34 or 35 hertz on Audiopipe 2000 Apcle & my mom hates when he rides by or pulls up 😂😂🤣🤣 but make sure you get a High-Output Alternator a 0 gauge Amp Kit and a Second Battery with at least 800-1000 Cranking Amps.
Amazing!!!
Will the APCLE 3000.1 be ok at 1 ohm? It says only 2ohm stable.
It wont last long at 1ohm
Can you dyno Power acoustic over drive 7500D
At 2ohm or 1ohm, can i use a stock 2005 camry alt or would i have to get an upgraded alt??
Depends on your budget... big 3 upgrade and a secondary battery should do the job. But I personally would upgrade the alternator too.
singram1978.... Ok thanks for tip.....im really considering this amp, the Apmi-2000, apcle-1500, and the Fosgate Prime r1200... I know the Prime would be the most efficient....
So do a big 3 and add battery such as XS or yellow top optima?
Yes... Stinger, XsPower, is what i would recommend over a yellow top.... if that is the route you wanna go i would put a yellow top under the hood and a different battery in the trunk. Also look into NorthStar batteries, and Energie batteries. www.gpcaraudio.com or www.sonicelectronix.com
singram1978 yellow top as the main car/starter battery and a XS or Stinger in the trunk?
Yep.....
Will those reducers fit into an amp with the pos and neg side by side?
Ryan Blankenship I have the cadence za12kw so two r Inputs r side by side and two r seperated by the remote
Daniel Harrell they do on this amp .
Daniel Harrell I have dual 1/0 inputs on this amp
When my intake series blew channel by channel i vowed to never get another, but these are a different animal! 4 ohms usually tells the story but in this case FTW!