Powerus PW8000 Amp Dyno! Brazilian Gem or Bust!
Vložit
- čas přidán 19. 05. 2020
- Got this amp sent to me from a dealer of Powerus here in the USA.. Was told it was one of the strongest amps he had ever heard... Well, that's why they make the Amp Dyno! Let's find out if this amp from Brazil has what it takes to be one of strongest amps to com across this test bench, or one of the biggest busts...
Want to support the channel? Click below! / budgetgembust
Want one of the products in the Video? Check the links below?
Power Supplies Used: amzn.to/2Oh6msq
1/0 Wiring Used amzn.to/2DBWAev
Favorite Speaker Wire amzn.to/2IvlQa4
Sky High Reducers Used amzn.to/2tW0tvt
Fluke 381 Clamp Meter amzn.to/2l0xYpb
Multimeter Used: amzn.to/2A0dOkh
Aimo Clamp Meter amzn.to/2C5KUAP
SMD DD-1 Set your gains like a boss amzn.to/2A1DNaS
SMD AMM-1 Test your own amps amzn.to/2C8KauI
14V XS Batteries amzn.to/2C8ZGqq - Auta a dopravní prostředky
Glad you’re back! It’s been a while
Been a while, welcome back
Powerus stock its about to go up.
Welcome back !
Keep the videos coming
Thats a beast! 💪💪💪💪
WOW your back!!! Good to see ya.
One hell of a power output period, Blew me away, great job
Welcome back. What a great amp👍👍
Hell yeah bro. Bout time for some new videos. Thanks for ur hard work bro.
I had just said haven't seen a video from you in a while. Glad to see your back and well. And back to preview a monster 👹
Good to have you back
You're back!
Thanks for another video. Hope all is well.
This is a amp that I will get in a heartbeat. Very nice results 👍👍👍
Finally your back bubba! Glad you're back I was starting to wonder. Just made my day 👍
Nice seeing you again buddy 👍. Very impressive results on this amp.
Woahh hes back!! We need you!
I can not wait for the new Synergy Full bridge! Awesome to see you back!
Good to see you again Ryan!
Glad to see more videos, and what one it is. That amp got the juice. WOW! Pricey though, but daaaang.
Very nice Amplifier, I look forward to Repair one in the future. Thanks for sharing.
Full bridge amps flexing their advantage, glad to see the movement and advancement in them in the US. Hoping and waiting to see you test out Wolfram's O series amps. Glad to see you back as well, its been a while!
I've been wondering if you were alright glad to see you back.
Where you been? I got hooked on your videos about 3 months ago and binge watched almost your videos. Even you bench pressing. Welcome back you make some good content.
Glad to see a video !!!!
Very Nice!! I would have been running them but the way my account was set up when I was building... Keep up the goods glad to see you back in action.
I only know only dude r7ning these
Welcome back!!!
I love love ❤ it. It got me turned on to see the thing perform and than see how it looked like inside. The amp she's alive.
Missed your vids and you show back up with a monsta
Been waiting on this one!!!
Powerus are built well man they out out I've got few of there amps!!
About damn time 🍻
Powerus FTW I've been telling guy's about this amp for almost 3 years now BEST BRAZILIAN AMP HANDS DOWN I'VE OWN BANDA,SOUNDIGITAL ,TARAMPS NO COMPARISON my 10k clamped over 15k 😁😁👍👍👍👍
who sell Powerus amps ? Do they have a website ?
...I think the md12000.1 amplifier ( the 1 ohm version) is one of the best amplifiers ever made. I played with the powerus, and banda, and they're all great, but that taramps md12000.1 at 1 ohm just seem to be relentless on a pair of sundown zv5 subs.
Powerus has been solid best amp coming out of Brazil. Hoping for the oxygen series to be as good
I think Banda
Welcome back bro
I just got blown away!!
Been missing you my man !!!!!!
Awesome come back video!!! Hopefully coming back video???🙏
Heyyyyyyy. I was just wondering if bgobb was returning. Nice to see you back. 👍
Yeeeaaaahhhhh welcome back .... I thought you was gone
Wooh wooh The Queen of the Beasts 👍
Good to see you
Holly shit! Your back. You have not done a video since I asked the last time.
Figured you just stopped. Good to see you back.
Damn buddy. Long time no see. This thing is a beast. Jesus. And it looks mean too
Indeed it is
Great vid dude I'm cracking up ...and good to see you again and man what an amp lol crazy I wonder what the damping factor is??? God bless ya keep up the great work
Holy crap new video my day is made
I said holy shit too, glad your uploading again
"Sick" and wicked Beast!!!
Finally hes back 😎
Nice looking guts. Good video as allways.
HOLY SHIT MY MAN! WHAT AN AMP! MISSED YA
Cool video!!!!
What the h*ll is this? I can't believe what I am seeing. A new video? You just made my night.
My man! We all missed ya.
with that crossover i bet this would be great on 2000 pairs of proaudio mids
Perfect for listening to the Young Turks on. Or even better, good mythical morning.
@@Hammerback972 Young Turds...
I love my Powerus 8k 💪🏽. Super legit
Fuxking nice!!! Quality amp right there
Wow. Thanks for share
Damn now thats some nice power
Is this an amp, or a welder?!? 1,000+ amps! Wow!
Takes power to make power.... not going to find a amp capable of 10,000w not drawing 1000 amps
Welding is mostly done with DC not AC like the audio output... pedantic I know but worth pointing out. Also why an AMP can kill you with a mere 80 volts... AC passes through the body easily DC does not.
No inappropriate touching while I'm talking,sounds like bill😂😂😂😂😂jk ryan I'm glad you're back!!!!!
It's been awhile man!!!
Well. Solid copper seems to be in fashion. What a great time to learn how to weld.
Ahh, the typical full bridge comment. Knew someone would say it.
cracked me up big time when you said "Holy Shit"🤣🤣🤣 awesome video👍
HO LI 💩
🤣🤣🤣
Powerus is a legit full range Brazilian made amp. That limiter is technology i first seen on the kicker warehorse. A lot of companies now make full range amplifiers. So for my dollars Korean always on my lows (80hrz ! No no no 👎) with the full range to match. Great video!
I dont understad why the people always complains about the filter on these amps, they are full range but now days every almost head units have LOWpass filters, so you can run your FR amp and cut the freq by the Headunit... and is if not enough, you can run a crossover or DSP, so.. whats the big deal?
@@mauromuller6649 for my setup Korean on the subs! Nowadays guys are more and more falling back to Korean boards because the Brazilian boards just can't produce the lows. You mentioned a head unit to make up for the amp's inability to produce 🤔. That's funny!
@@Mr.NpK143 that's absolutely not true, and just typical FB talk. Full range, full bridge amplifiers, play low end frequencies just as well, as half bridge. Just ask, "Mr 15hz" lol... and he runs Taramps.
@@Chuck_Sanders prove it wrong! Chris @ CrazyHobbies just got rid of to Sound Digital 12ks. I is actually up for a raffle on his CZcams channel. Go ahead and check him out. He'll vouch he clamped 7k out of each 12k. Was he playing the lows? Hell yeah, but what happened to the other 5k? Needless to say he switched out to 4 oth the jp63s and has since upgraded to 4 of the jp83s for his new build. He like myself Korean is just the way on the lows! And dig this! I wont even chsrge you 👌
@@Mr.NpK143 you are the one bitching, about full range amplifiers. They play low end frequency just fine, and just the same. Your just another FB groupie, using the same old, passed around garbage info. You prove me wrong? I won't charge you. You make the argument, back it up? Whatever frequency is being fed, into the amplifier, it'll play. FULL RANGE plays all frequencies. That 80hz crossover, doesn't mean that's where it starts... haha. Damn
Good grief! What a beast!
Holy 💩 that’s a lot of power ⚡️!!!
Great review! My poor 95 amp alternator can't handle my two pioneers(9701)(8604) in my Acura rsx. Could only imagine what this would do.
That’s interesting because I’ve been using my Stetsom for six years without issues and I actually own two.
I own the Venom 800.4 and the 3KEq.
Stetsom amps are good alot of people talk trash about them. I sell and install them once your electrical is good and clean rca signal your fine. I notice lots if guys try to run them for bass and to me they are not intended for that but mids and highs stetsom is great!
@ *Luke_784 Low Frequency*
Thanks for the input, interestingly enough I was using my Stetsom venom 800.4 which is not specifically an amplifier for Bass but I was using it with my Sundown 15” subwoofer been playing down to 10 Hz at full tilt many times. And have not caused me any issues whatsoever. I was skeptical on doing that but it withstood the test of time. I recently bought a Taramps Smart3 so now I’m using the Venom 800.4 for the midbass and vocals.
It's highly impractical that most people would have enough alternator to support this at 14.4V but it should be quite doable with a decent Lithium as those will hold ~13V for extended periods of time.
We installed a Powerus 10k with Four 80Ah 3000 cca lithium batteries and factory alternator, 0 problems and 153+ dbs on music all day
@@danielyepez7196✅😎👌what brand lithium you used and by now what would you use instead?
Another great amp dyno
Beast of a Brazilian....jeez!
Wow when the amperage meter broke 999.OL holy crap that amplifier is a beast.
These comments crack me up. So many rude people not understanding ohm's law, I'm worried for people buying amps like this, let alone hooking up their own electrical.
Thanks for the dyno, that was enlightening and very informative. I have to Orion hcca 3ks clamping just under 15k @15v, 1ohm each amp, on 160ah LTO, and I have 4 runs of 2/0. Beast amps for the price. I'm doing a new build that a lot bigger and was thinking about adding 2 more of my current amps or getting some of these powerus amps. They are stout that's for sure! I haven't had good experiences with any full bridges I've had. This looks promising tho.
Whole lot of power 🔥💪✅ BassGod ( CZcams channel ) runs these amps and is also a dealer...
Can you make an Amp Dyno video w/ different gain overlap settings and show wattage output difference? Basically do 3 certified dyno runs with 0db overlap , 5db overlap & 10db overlap on the same amp at the same 4, 2, & 1 ohm!
Pretty sure that's who sent me this
10k watts @ 12.7v is impressive! Again, the Brazilians have no idea how to size their power inputs, but I guess you could get your own quad 1/0 input terminals. This should really have three 1/0 inputs for 10k watts. I would still rather have the Wolfram half bridge Korean, but this Powerus amp surprised me for sure. Good video Ryan. Glad to see you making content here and there.
So you'd rather have a newer full bridge thats cheap as fuck to build over this? Weird.
They dont need quad inputs, they know exactly what they're doing. A good full bridge amp is more efficient than a half bridge of the same size, thats why they dont need triple inputs on an 8k amp.
Not familiar with that brand. But I took a chance on Stetsom with a 6k first now an 8k and I rock custom made subs with 4 inch coils with the exception of my new 18 inch kicker solo X motors on 15 inch frames. So I beat the crap out of my amps playing the lows to Extended low bass tracks and 18-28 hz test tones. I have the Alt and batt Power my stuffs stays lukewarm to warm. Only thing that heats up is my headunit :) my sub builder warned me about Brazilian audio now including me a lot of his customers are rocking Brazilian amps and now he is a believer though he still says Wolfram is worth the money if you got it. Ya was wondering what happened to ya!? Keep it going man!!
So $1000 for the amp and another $3000 for the high output alternators and batteries needed to run it. Time to start playing the lotto again.
Glad you're back.
Add 4 16 volt batteries and when you turn it up they drop to about 13 volts you still need a high volt alternator though, glad he’s back too
I had 13 14v batteries charged to 15.8v and 3 100amps PSUs linked and this amp STILL dropped me down to 12.79v 🤯 that's dead empty on these batts..
@@bigblank69 Dam!
Budget Gem or Budget Bust I think the super caps would only help the dynamic power run anyway
Richard R Does anybody make a thousand amp alternator? You’ll need it.
nice amp... I am thinking triple 0 gauge inputs...since the amp gauge limited out over 1000 amp draw. You have a great channel 👍 😀 👏 😊
There is an amp that I would like to see on the dyno in a video that is made by someone other than the company that makes the amp. The skar rp1500. I absolutely love your channel and I would love it even more if you would make a vid on the rp1500
That amp is crazy
AMAZING!!!! %efficiency?
this thing is a freaking monster...
BassGod on CZcams. He does musical 164 with powerus and Fi waiting for his new build going to be nasty. Hit him up for powerus
I'm sure that's who sent this to him. That dude is the only US distributor I've ever heard of
I love looking at amp guts
That is a freaking monster
Its a real shame that even a year after this video went up that these are pretty impossible for me to find.
I'm in this amp!!
Can you test the new Cerwin Vega rull range 3k? Good video!
Yeah boy!
Hey I just want to say great videos I love what you do is there any way that you could check a DS18 GFX3K1 full range
can we PLEASE have some different intro music? I watch your vids late at night after work and the intro wakes me up lol, but I loved the video
Shame they don’t have a bass remote .Apart from that it looks and works very well especially for the money 👍
What's up, great to c u . Man those outputs would have to be rated at 1k a piece or 2for a pair, heck there aren't but 8 in the output section...
Well got damn!!
How big of an amp can you test on your current setup?
Massive powerhouse, but you will def need a serious alternator and battery/Super cap setup to run it.
Any idea how would such full bridged amps sound? Is the sound quality, woofer control etc. as good or is it just power
Nice
A person has to have a massive power bank to run this min of 70% good luck for those bassheads to run this amp
If you have the right kind of lithium cells, or a lot of good AGM batteries, this isn't too hard to run. Less than $500 worth of A123 cells from battery hookup would do 1000 amps continuous no problem, or a big bank of headway 38120's. A few big Northstar AGM batteries would also do the trick. Lots of people have the 12k version of the Taramps MD series, and the Wolfram 7.5k that does well over 9k watts, amongst others like Sundown's NS1 or NS2 or the Salt 12k's. You might need 2 or 3 big alternators, but I think the people who would buy this amp know they need a ton of juice to run it. It would be a fun science experiment to mess with this kind of stuff if you have the extra money to play with. Im not personally in that boat, but I still plan on building a decent lithium battery for my little 3k amplifier. I can do $300- $400 on that to play with lol.
I built 10kw pwm amps when i was 21 and Just graduated from university in Holland which is pretty much mit ober there. My thesis was about amplification under certain circumstances.. Goals where over 90% eff and minimal use capacitance and transistors (mos-fets). Worked out Just fine with 1989 fets. So Why wouldn't it work now with over three decades of developement in Electronic......
Btw we didnt use filtering so we had some issues with interference with radio frequencies. 🤣😂
Been awhile sir
13:24 as the tone "beats" the amp Dyno is dimming like the headlights of a car that would run this jewel!
Yep.. and I'm running 14... yes 14 batteries to this amp in the video.. plus 2 100 amp power supplies