Synergy Mobile Audio 5.1D On The Dyno! 5,000W or Bust
Vložit
- čas přidán 19. 09. 2020
- We have one of the biggest Synergy amp in this time for a Dyno. Does this $999 amplifier actually produce 5,000W RMS at 1 ohm? We shall soon find out!
Get your own WFO 5.1D @ www.synergymobileaudio.com
Want to support the channel? Click below! / budgetgembust
Want one of the products in the Video? Check the links below?
Power Supplies Used: amzn.to/2Oh6msq
1/0 Wiring Used amzn.to/2DBWAev
Favorite Speaker Wire amzn.to/2IvlQa4
Sky High Reducers Used amzn.to/2tW0tvt
Fluke 381 Clamp Meter amzn.to/2l0xYpb
Multimeter Used: amzn.to/2A0dOkh
Aimo Clamp Meter amzn.to/2C5KUAP
SMD DD-1 Set your gains like a boss amzn.to/2A1DNaS
SMD AMM-1 Test your own amps amzn.to/2C8KauI
14V XS Batteries amzn.to/2C8ZGqq - Auta a dopravní prostředky
That 1 dislike must be from the guy who wasted his money on a Salt 4k.
Lmaooooo
Facts 🤣🤣🤣
I have the WFO 3.1D. I bought it about a week after watching your video. It is 💯%brutality in the trunk of my car. I've got 3 10" XFL'S in a self built enclosure and the word my girlfriend used was "violent" lol Hands down THE best amp I have ever owned. Thank you for all of your videos. I think I speak for everyone by saying what you're doing is freaking awesome. Keep on rocking out!! Next on my list is the 4ch WFO and a single 15" WFO !! SYNERGY AUDIO #1
@16:40 OMG a five channel amp that actually has enough power to make a five channel amp worthwhile for a lot of people!
Sundown has made similar 5 chan amps
@@OxBlitzkriegxO I haven't seen one with 1500 watts on the sub channel.. what model? I'd like to see that!
That's what I said.
Beast! I want that 5ch, gimme!
I kept the 5 channel... no way was that going back lol. The 5 channel is my favorite amp I have tested to this point.
Aren't you both the same guy?
@@sunitadhyani1013 no
Wow it's been like a month glad too see you back
I bought the 2.1 because of your video on it. Have not been disappointed. Thanks for these.
YES!!! I have been waiting so long for this!
This amplifier made me laugh so much but a good way. While other amplifiers hardly can even reach their true power, this one went way beyond with its actual ratings; it’s awesome!
I've been looking forward to this video for months. Thanks, Ryan! And now I know why my 1,750 watts RMS Fi Audio Q 18s didn't like 0.5 ohms on this WFO 5.1D. Lol
Yes!!! More amps tests!!!! Thanks for the video!!!!
I agree this amp keeps putting out massive power for a lot less money than sundown amps do, very well made amp, great job 🤘
Nice dude. Thanks for the content. Always appreciate these videos
Great review Ryan!!!Always look to your videos before making purchases for any of my car audio.I appreciate all you do for "we" the people👍
3:18 "find me a 5yr old Taramps amp, I'll wait.....................Yeah you don't find them, they blow the fuck up" YES!
Five years from now, there will be countless taramps circulating. Taramps did something that companies tend to not do and listened to criticism and made changes for the better.
Last I checked, amps don’t blow from time they blow from inexperience user error.
Check out Barevids, he did a breakdown on why a Taramps HD busted and it wasnt user error, it was from the fans blowing dust on the Mosfets causing it to arc and fry... So again... please find me a 5 year old Taramps that was used for powering subwoofers and run maxed out like halfbridge amps are typically run...
Thanks as always for the great videos I will have to look into synergy
This seems really good ,great looking insides,didn’t catch the price on your video , I will definitely check these out good job synergy
Wow man my goodness what an amp now that's a top result 10 out of 10
Great video man. I'm glad see finally got to see it. I am very impressed with the amp to say the least. I sure wish I could afford it. Sure would have like to have had a chance to own one of the syn series. I guess that dream was shattered.
Holy crap !! What a beast of an amp !!
I hope they go forward with that 5 channel!!!! If the test results are close to rated, That would probably be my next amp purchase for the old work truck..
Omg!!! Thats a beast with excellent quality!!
I was waiting for you to opened 🙃
The power output is wicked!
Wow, that amp is a boss! Great review!
MOVE FORWARD SYNERGY 5 channel!!!
Let me just say... Its damn good
Those amps are gonna sell like crazy..... I want one for Christmas.
Thank you boss!!!
Who else presses the like button before they even start watching?
Always XD
Yup first thing I did
no
Always on this channel 🙋🏽♂️
Me
I love my high quality Korean amps, I have a DD m3c, for a Supercharged DD 9915, at .5 ohm.... I do admit on my build in my Durango I’m running a Sundown SFB 8k, 75 ah cmax, 3 psi18 platform 2s, 300 amp JS alt.. I clamped 6651 watts,”on a burp”at 13.7v wired at 1.33, three months on a daily, and 3 shows later it’s still going strong first full bridge amp, so far it’s doing good... Synergy fml, doing work for sure👍👍 respect... Incase anyone is wondering my dd m3c was $1200 rated 3800... Synergy is a Gem 💎 💯 percent...
MADE IN KOREA GAME OVER :D LOLOLOOL it is a tie between synergy and twisted sounds man what a WORK OF ART :)
You no like Brazil?
🤷♂️
Yeaaahhh!!! Synergy baby!!!!
The thought of designing, fabricating, and installing a multipul alternator bracket for whatever that's going in is making my happy inside... I need to open my shop back up.
Great video. 👍
Nice amp Awesome job!
Been saying it since day one SYNERGY AUDIO FTW!!!
Yessir!!!!!
Holy crap I need that 5 channel. I don't care what price it is, it looks perfect.
Someone lagit with a different opinion about sundown. Thanks for the straight up honest opinion.
I like how you don't beat around the bush.
Love it crazy loud wish I had $1k dollars to spend on an amp but if I don't even have cash for 2 Rockville DB comp 5s. What I do have is 2 old Hifonics Brutus BRZ 2000.1D wired to .25 per amp strapped to .50 ohms and they work just fine for now. After box rise each amp is around true 1 ohms each.
Ive got a wfo 3k wired to .33 and was clamping over 5800 on it at 36hz
Wow, what ohm was you clamping? DUDE post that! Plz leave a link.
@@scottiffanimccord1509 I dont have the pic of the 5800. it was during testing for midwestspl when i was trying to stay under 4k, yes TRYING to stay under 4k haha. Check out my instagram (HittinHertzAudio) and you can see when i did a 151.7 under 4k. When i do my next build ill make sure to get the 5800 pic lol. (And im wired to .33)
@@hittinhertzaudio8950 Oh wow your not playin!! I just looked at your instagram. I just made my account last night i will post some pics of my little build.
Do you have a fan to keep it cool or do it handle it just fine I’m thinking about going with synergy
@@jbell0507 if youre wiring below .5 dont go over 15.3 volts. but you might wanna fan if you plan on playing music. Ive got a 8.1 now but when i had my 3.1 at .7 it rarely got warm
I'd love to have it
Holy crap I need to buy a few ASAP 🤤😍
WOW! That's very impressive...
Yo awesome vid....and love the language brother 👍
This thing is underrated like the old Addcom amps from back in the 90's
This thing is a frigging BEAST - I have a 525Amp alternator in my car and no way I could power this on peak.
The efficiency is damn good. I'm impressed.
Thanks again
This amp is a monster and very efficient
looks good
Waiting for the O series.
jesus, that amp is a beast
Dose he post back? Do you see him? Do you hear his voice? I hear Jesus too!
Love to have that amp on for sundown 18s
some serious power there wii
Did anyone notice he was trying to be like Wilson audio labs with a little extra if you watch the credits, and if you notice in the beginning I think he hooked up the amp wrong because he goes on about the plus and negative positions... Just saying LOL 🤣🤪😂😁😛
If he hooked it up wrong, amp would have been blown and unable to test
As mentioned, if I had reversed the polarity I wouldnt have had a video, and I would be out $900 buying the owner of this amp a new one.... The rant was caused because on my test bench I have my power connections drilled into the side of the bench, and I run short runs of power wire to the amp and 3 of them in different orders was really pissing me off connecting them lol.
hay i like the bass boost. heres why. my 8's bottom out of i let somthing like 20hz hit them full tilt, if i use the crossover controls its to aggressive and i loose my subsonic, giver alittle boost the in the 45 and cut the gain down instill that bottom out condition goes away and i still got all my power were the sub can take it, and i got a as much low as im going to see without over travel.
Lol wait till Curt sends you the wfo 8.1 haha. Ill try and agg him on lol
Synergy ftw!!!! Cany wait to see the 8k
Waiting on that 8.1 dyno 🥰
could buy almost two taramp bass 8k for that price! just save the other one for later! lol. decided to use both of mine now tho! all joking aside i love that this amp just shits all over its own ratings surpassing them like that! i wish more companies could do that, that's awesome. thing is built like a tank
Is there such a thing of being a little too conservative with their ratings? Good stuff. I'm with you on this whole Taramps thing. I bought the TS400 for my mids. Sounded like mud. Replaced it with a 4ch Pioneer. Clarity is restored.
I wish I had found these amps before I bought what I have now. More power and quality for close to the same money. Dammit.
Nice amp!!!
That board looks EXACTLY the same as the Crescendo Audio BC-4K but the BC has dual inputs and not tripple inputs
That sir is why when I purchased my amp to power my four Sundown SA12-D2s I bought an Orion HCCA 3k SPLX amp. Overkill? Yeah, but I didn't want to strain the amp and have it overheating and clipping out.
Bass boost is good if you understand it’s just a EQ. You have to lower the gain to use it.
you have to tune the gain around the boost knob not tune the amp and then use boost
Hopefully the orino hcca 5k does something like that
Your power supply is bloody impressive bro!
LOL oh dude you got the coolest name!
A higher S/N ratio is better and 100db is pretty good
If it were at 1w then it would be impressive. At over 7KW it *really* isn't, at 1w it must be in the mid 60's
Hickory Dick Its not much different of S/N of any other amp in its class
@@cjon24s69 I had a bit of a look around and you are right, the HCCA amps, DC Audio, Taramps etc are all around 100dB S/N at full swing. The biggest Alpine monoblock I could think of (MRX-M240) will do 108dB at rated power (1500w) into 4 ohms. So with my math (going by the rated 1935w @4ohm numbers), this Synergy amp is running about 39dB of gain, so you could say that its S/N at 1w output will be about 61dB or maybe even below 60. The Alpine is rated for 82dB. Rockford Elite amps from 2004 (eg T40001bd) are rated for >80dB at 1w also. These are top shelf brands give their manuals detailed and realistic specs, for example, they both admit their S/N figure is A-weighted, the RF amps even include their slew rate! My point is that having shit loads of power like this on the cheap is more often than not, going to come at the cost of a ton of noise at idle or low level listening. But you get what you pay for.
The Orion HCCA SPLX and even the XTR does numbers way over the rating too
I've never used bass boost on my other amps except my pioneer which the "bass knob" was the bass boost vs remote gain and I would up it only on rock with no bass, but i experimented with bass boost on my new APCLE 1800 because it has frequency for boost. My box is tuned to 29 so on rock it's not as good so I set it at a higher frequency and upped it some and worked good but I turned it off because I still heard not much but a did hear a slight bit of boost down low and I was paranoid it would clip even on low bass type music where I set my gains without it but in theory it shouuuld be ok...but not worth it to me.
Love the channel and the video keep it up. And what track are you using during the dynos I've tried shazaming it and can't find it or who does it.
Ok Ryan we need the below 1 ohm tests...
Yes!!!
I know. I've been running mine at .3 for months. I'd love to know what kinda power it's making.
I'm sure he would love too,but it's a customer's amplifier unfortunately.
My new car has been stock for a year. I actually picked it because it’s a good audio platform. It’s also a good performance platform. Seeing this pop up on my feed makes me feel dirty lol. I can’t go down that way to deep rabbit hole again.
I bought a Liberty 3.0R Spec B with the McIntosh factory stereo a few weeks ago, I feel awful not using my HCCA subs and amps and Pioneer P99RS headunit etc etc, but the car is too nice to destroy putting in all this crap.... i think??
Hickory Dick I just caught the performance bug. It’s been 15 years since I had anything over 300hp and handles like it’s on a rail.
Wow that was amazing 1ohm dynamic! And for someone who wants to say taramps blah blah this amplifier isn’t much more then the taramps anyway...and you have to replace the taramps every 3-6 months of your really running it lol
Yes!!!
I wanna see that 5 channel you previewed at the very end
I miss my synergy 2k amp
Drop ohm load a little more on dynamic.. please I'd like to see
Sundown will. Bet on that!
Sundown may cost a bit more, but everything they put out is quality and you won't be going wrong...if you are willing to spend a bit more. Some of that money they make is used building the community. How is Synergy interacting with the community? It may not be important to everybody but to some it is.
Sundown amps are not USA made
@@chrisjones6165 Neither is Synergy. Made in South Korea.
@@crazy8sdrums I never said they were. I run Orion xtr amps my self. I'm not aware of any made in usa amplifiers anymore
@@chrisjones6165 What was your point?
@@crazy8sdrums what is your point?
🔥🔥 you think these synergy amps are better choice over Salt amps? I been debating on which 3k amp or 2500 amp to get. Synergy looks pretty good and cheaper then Salt line
Could you do a review of the Rockville RXH-F5 5 channel amp and I’d like to know the true ratings and your thoughts
I had my taramps since 2016 DSP 3000, it's been running great. But that amp u tested I'm sure will take alot of abuse.
Did Synergy copy Trauma or did, Trauma copy Synergy Mr Blankenship you must answer the question? Absolutely love the up loads.
Neither.... Trauma and Synergy customized designs from S&I... This is not the same thing as RF designing a all new amp, but better than just straight generic
I'll still run with the orion 2500 xtr pro
I have sold more taramps and skars than synergy on offer up never had a complain so far .
So out of the 3 test which one is the most important?
Holy crap that thing is a beast
Over 1,000 watts of dynamic head room @4ohms 🤯
about 1.7dB dynamic headroom from 1% THD continuous to 1% THD dynamic at 40hz
Please dyno a ORION HCCA 8k
What about the comparison of that wfo 5.1d and an orion hcca splx 5k?
So what did the SYN 3.5k do on dyno??
If the left side power and ground were flipped it would be great.
or maybe 2 banks 3 on one and 3 on the other
It's literally stuff they got off of Alibaba from S&I and DONGGUAN ERISSON ACOUSTICS.
Yesssssssssssssss zBuT tHeY aRe So gOoD
Welcome to the global economy. No longer limited to vendors!
@@CORZER0 It's totally the current state of the industry. Sundown gets all of their stuff from DONGGUAN, too.
what about a half ohm run? or .8 ? love to see it it looks like a great amp! oh ya i got a 5 year old taramps .. they are better than you say they are, just sayin i like the amps personally
Tramps are decent amps, but they do not like getting over driven at all.. if you run them properly they are fine....
Big numbers but I'd be impressed if they didn't use junk caps inside! Rubycon, Nichicon, Hitachi, Panasonic electrolytics FTW!
does it run hot at all
Wats the efficiency of these..???
I wanted to see a half ohm test. I just bought this amp and my only options are 2 ohm or .5 ohm final .. It's actually .4 ohm. Might be too much power for my Deaf Bonce 18 rated at 2700 watts rms. Guess i;ll have to be easy on the knob.
I've been running this amp on my Fi Audio Q 18s. They're only 1,750 RMS, but can take a beating. I'm running it at 0.3. They get a little stinky at times. 😂
That is not what bass boost is for. And yes u can use bass boost and have it work just fine and not blow subs, The whole point of bass boost is to help with the bottom end of the frequency if your tuning is higher or small sealed boxes. The bass boosts frequency usually 35hz or 45hzor Adjustable to help flatten the bass response. Bass boost is to be used first before your gain, NOT after to just bury the clipping to the max . my box I have at the moment is tuned to 37hz, I use quiet a bit of bass boost to help with below tuning , then I turn the gain up till I see clipping. the whole point is to get a flatter bass response if you're not worried about having the loudest subwoofer for one song . I run a JP2300 on a single 10 inch sundown Classic in a 2.25 cube net box with 36 inches of port area. I beat the shit out of it and its loud , I've had walled set ups and this ten is getting down and hits below 30hz all day long and its been 8 months still slamming. People have been taught just like me 20 years ago that bass boost was bad, but amazing how so many amps still have it too this day. if u use your bass boost correctly it's no different than using DSP for an Audio control amp or alot of home theater amps to get the flattest response u can. So yes when you use your bass boost first u will get to clipping at that frequency first and be under clipping for the rest otherwise u might have a peaky box that rocks out for only one genre of music.
Boom Boom
I'm pretty sure I've seen that same board design in Wolfram, DC Audio, and Crescendo amps. Monster amp for sure.
Wolfram doesn't use S&I (Except for the old C2400)... so you didn't see it there... DC and Crescendo is possible, but my understanding is these are unique boards
it looks pretty familiar to that dc 7.5k
get there 8.4D on the dyno
WOW...👍👍👍🇹🇹🇹🇹🇹🇹...