This is a review and test ride of the all new HJC RPHA 71. However, it's not my helmet, so I welcome a special guest reviewer to the channel to tell us about what it's like to ride in.
Great video sir. Also share the exact same experience with my intercom.. In fact one of the reasons I watched your video was to see where do people stick it so I can also give it a try. Bought this helmet a few days ago and its been great so far its super confortable and quiet but the intercom thing ruins the "perfectness" of it Thanks for the video!
Thank you for your review, it really helped with my decision. I really like the look of this helmet and the fact that it doesn't have a center lock on the visor. However i don't like the intercom mount and the fact that it's actually a bit louder than the predecessor (from the Db measurements of another channel). So i'm going with the rpha70.
Don't forget that the Rpha 70 doesn't have the new safety standards. Also, I have the Rpha 90s and the sheild is not nearly as good as the Rpha 71. I really don't think a couple DBs will be noticeable, but the Rpha 70 might have good sales now. Good luck with your search.
panel is on both sides because HJC comm system goes to both sides which (I guess) makes it slimmer. As for other comms... I wouldn't be surprised to see aftermarket plastic adapters for helmets like those. Adapter would go into slot on one side and Cardos would attach to it on yhe other side. It seems like a realtively sinole thing to produce (or 3d print)
I'm quite surprised that there aren't any parts like that for sale, especially for shoei gt-air 2 and neotec 2! One of the reasons I didn't buy (yet) shoei. I want to be able to use a Cardo unit without major DIY, cause I'm pretty sure I'll ruin the helmet before achieve the task 😅
@@Bikes_and_Hacks , maybe some 3d design student would draw an adapter, then it's easy to pay for single item 3d printed, or even more and then resell it. Shouldn't cost much.
regarding the comms units: 1) the additional pannel on the other side is for the other control unit for the 50B comms systems which comes with SENA's mesh. 2) You can buy adapters that click in to the slot on the left side you then attach your cardo too. This makes for a seamless design which I really like, especially with a packtalk slim (the slim doesnt fit rpha 71 sadly without modifying it)
@@TimsMotorcycleAdventures Idk why but my comment was not added, I'll try again. I have found such plates on a phillipinian website, these are 3d printed. I might have jumped the gun too soon with stating "you can buy" them. I guess that since rpha 71 is quite new the product is not in demand yet. Cardo makes dedicated plates for shoei gt-air 2 and nxr 2 helmets, some ppl are making those for Logan helmets etc. I think that it will take some time before there will be ones available for RPHA71 However, if you have a friend with 3d printer or access to an university one this might solve the problem for you. Although I know how it sounds until the adapter plates will start being widely available thats all I can think of for now. I am also considering purchasing this helmet since it fits my head the best. Since I dont have friends ( :( ) I was thinking about going with sena dedicated comms to listen to music and take phonecalls. Do you have any experience with this?
@@teodor103 I don't know about the Sena, but we use the Cardo system and it works great. We just stuck it on the side and it works fine. The problem for me is if you have 2 helmets the integrated system doesn't work. Also, if you get rid of that helmet and buy a new one, you need a new come system. So the Cardo works well for us.
Nice review! I have same onr but find the opening for slide lever for drop down visor at anything 45km/higher it makes a lot of noise, the wind gets sucked up and turbulence is so loud...u never experienced this? Thanks again for a great review!
Thanks for watching. This is my wife's helmet and she says she has not noticed anything like that. Maybe the mechanism is not installed right? Not sure...
Fit is important for sure. I wonder if the new ones will fit the same as the old ones? Unfortunately I can't compare it to my RPHA 90s, my wife's head is smaller than mine.
Interesting, to me the RPHA 71 is much higher quality than my RPHA 90s Carbon (which has been a huge disappointment). The shield in particular. What did you like better on the 70?
Great video sir. Also share the exact same experience with my intercom.. In fact one of the reasons I watched your video was to see where do people stick it so I can also give it a try. Bought this helmet a few days ago and its been great so far its super confortable and quiet but the intercom thing ruins the "perfectness" of it
Thanks for the video!
Just save 120dollars and get the dedicated entry level Hjc smart 11b Bluetooth. I've got it and it's perfect not to mention its sleek looks.
Super review guys! Look forward to hear some more motorcycle chat from both of ye
Thanks for watching!
Intercoms should be universal, so you could use them in every helmet. Nice review! Thanks!
Great review and I agree completely about the comm system. So frustrating.
Thanking the little woman for her input on this helmet 😉👍
Thank you for your review, it really helped with my decision.
I really like the look of this helmet and the fact that it doesn't have a center lock on the visor.
However i don't like the intercom mount and the fact that it's actually a bit louder than the predecessor (from the Db measurements of another channel).
So i'm going with the rpha70.
Don't forget that the Rpha 70 doesn't have the new safety standards. Also, I have the Rpha 90s and the sheild is not nearly as good as the Rpha 71. I really don't think a couple DBs will be noticeable, but the Rpha 70 might have good sales now. Good luck with your search.
panel is on both sides because HJC comm system goes to both sides which (I guess) makes it slimmer.
As for other comms... I wouldn't be surprised to see aftermarket plastic adapters for helmets like those. Adapter would go into slot on one side and Cardos would attach to it on yhe other side. It seems like a realtively sinole thing to produce (or 3d print)
I'm quite surprised that there aren't any parts like that for sale, especially for shoei gt-air 2 and neotec 2!
One of the reasons I didn't buy (yet) shoei. I want to be able to use a Cardo unit without major DIY, cause I'm pretty sure I'll ruin the helmet before achieve the task 😅
@@Bikes_and_Hacks , maybe some 3d design student would draw an adapter, then it's easy to pay for single item 3d printed, or even more and then resell it. Shouldn't cost much.
regarding the comms units:
1) the additional pannel on the other side is for the other control unit for the 50B comms systems which comes with SENA's mesh.
2) You can buy adapters that click in to the slot on the left side you then attach your cardo too. This makes for a seamless design which I really like, especially with a packtalk slim (the slim doesnt fit rpha 71 sadly without modifying it)
Thanks. Do you have a link for that adapter plate?
@@TimsMotorcycleAdventures Idk why but my comment was not added, I'll try again.
I have found such plates on a phillipinian website, these are 3d printed. I might have jumped the gun too soon with stating "you can buy" them. I guess that since rpha 71 is quite new the product is not in demand yet. Cardo makes dedicated plates for shoei gt-air 2 and nxr 2 helmets, some ppl are making those for Logan helmets etc. I think that it will take some time before there will be ones available for RPHA71
However, if you have a friend with 3d printer or access to an university one this might solve the problem for you. Although I know how it sounds until the adapter plates will start being widely available thats all I can think of for now.
I am also considering purchasing this helmet since it fits my head the best. Since I dont have friends ( :( ) I was thinking about going with sena dedicated comms to listen to music and take phonecalls. Do you have any experience with this?
@@teodor103 I don't know about the Sena, but we use the Cardo system and it works great. We just stuck it on the side and it works fine. The problem for me is if you have 2 helmets the integrated system doesn't work. Also, if you get rid of that helmet and buy a new one, you need a new come system. So the Cardo works well for us.
@@TimsMotorcycleAdventures these are both valid points.
Thanks for the informative video!
Could you please let me know if the sizing is in line with the sizing chart given by HJC?
It seems right for her size of xs. Her last hjc and Shoei were also xs and fit her well.
@@TimsMotorcycleAdventures Thank you!
Because the HJC 21B intercom has left side controller only, but the 50B has both side...
wondering if you got thicker 3m tape you could stick it on the panel instead..
Maybe you could get it to work. I thought of cutting I to the plate and trying to modify it, but really, this works pretty well.
Nice review! I have same onr but find the opening for slide lever for drop down visor at anything 45km/higher it makes a lot of noise, the wind gets sucked up and turbulence is so loud...u never experienced this? Thanks again for a great review!
Thanks for watching. This is my wife's helmet and she says she has not noticed anything like that. Maybe the mechanism is not installed right? Not sure...
Thanks for checking...
Great review! Loved the idea of having your wife in to interview! How fun!
Will be tetting this helmet soon!
Thanks for watching!
I think HJC makes GREAT helmets. BUT...they don't fit my head.
Fit is important for sure. I wonder if the new ones will fit the same as the old ones? Unfortunately I can't compare it to my RPHA 90s, my wife's head is smaller than mine.
I think the latest size of hjc helmet is one step bigger than before hehe try the xxl hehe
@@edwinramos964 it’s not the size, it’s the shape
Rpha70 L was little bit too tight for me but rpha71 L is ok now. It is little big bigger
Thanks for the video!
I have the HJC RPHA 70 and I can say that the 71 is a real downgrade to the 70
Interesting, to me the RPHA 71 is much higher quality than my RPHA 90s Carbon (which has been a huge disappointment). The shield in particular. What did you like better on the 70?