Low Oil Pressure? Oil Light On? Fix This Problem With One Part on Your Chevy/GMC Truck or SUV!
Vložit
- čas přidán 13. 07. 2024
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/248/d/oil-pump
Is the oil light on in your Chevy or GMC Truck or SUV? In this video, Andy shows you what to look for when you are having a low oil pressure problem. Whether it's low oil, clogs in the filter or pickup, or a problem with the pump, this video will get you on the right track to solve your low pressure situation in no time!
0:00 Low Oil Pressure? Oil Light On? Fix This Problem With One Part on Your Chevy/GMC Truck or SUV!
0:36 Checking Engine Oil Level and Condition
1:20 What to Check if the Oil Pressure Tests Low With a Pressure Gauge
1:52 Where's the Oil Pump, How Does it Work?
4:40 SUBSCRIBE! | Shop 1AAuto.com Link Below!
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oba6/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oba6/1AXAA00013
• Pry Bar 1aau.to/oM5/1AXAA00020
• Complete Metric Socket Set 1aau.to/o84/1AXAA00043
• Oil Filter Wrench 1aau.to/obq/1AXAA00026
• Rust Penetrant
• Complete Hex Socket Set
• Floor Jack 1aau.to/oVG/1AXAA00068
• Jack Stands 1aau.to/oN9/1AXAA00065
• Wheel Chocks
Subscribe: / @1aauto
For More Info visit us at 1aau.to/h/eq8/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
You are the best CZcamsr I've seen on the internet , love you guys .
Stay safe and strong
one of the best CZcams channels ever. thanks for being here.
On my O2, GMC sierra, 1500 4.8 V8. 2WD, I replace the O-ring on the pick up tube, and that solved the problem of the low pressure. A lot of work to change a $3 O-ring!
Love these videos. They are very handy for a shade mechanic like myself. Keep them coming!
2010 Silverado , replaced oil pressure sensor , still came back with low oil pressure code , problem was the auto shop had done an oil change and put the wrong size oil filter on my silverado , changed the oil filter to the correct size and that fixed the problem.
Thank you for the good information, that's awesome!
Great information . Thank you
Excellent video. Thanks for sharing.
Thank You 1 A Auto,Youre Awesome...
Thank you brother!!
Thanks buddy
Thanks
Thanks u .. sir
I did a DOD delete. New lifters, cam timing chain and valley cover from scoggin dickey. Be rings, bearings gaskets, o rings, water pump, oil pump(melling )and belts. Oil light keeps coming on at the light or at idle. Once i pull off its fine. Light goes off. 07 suburban, fully rebuilt 5.3
I changed the pick up tube ring. Problem went away for maybe a week. Fresh oil change last week.
You forgot two things before you get to the oil pump. The screen underneath the oil pressure sender that shouldn't be there in the first place, and you need to check the o-ring at the front of the oil pickup tube.
That oil pump actually looks just fine. Put a new spring in it and put 2235 mm washers underneath it and increase the oil pressure.
an instant classic!
hey guys do you have a chat or an email to ask questions to? I just watched one of your videos on blower motors and I found somewhere to test that the ground wire is the problem by creating circuit with a piece of wire. I touched it to the connector near the ground wire and touched to metal bracket. There was a spark, but the fan started to work - could it still be the resistor? Learned a lot from your videos, thanks!!!
On Silverados Theres a screen under the oil pressure sending unit. It can get plugged up.
a low engine oil pressure error can also be due to a bad oil filter. Because I had a case when replacing the oil pump with a new one did not eliminate the problem, but the banal replacement of the filter with a new one, of better quality, because the previous one was almost new but cheap, helped to eliminate it. Also, an error can occur due to cheap or unsuitable engine oil for your car
My tundra has the same problem after I got the oil changed and I heard that the mechanic had messed up oil filter and now my oil pressure gage go up and then it dropped
I love you all... from iraq i follow
WOW
So where do I get a pressure sensor that plugs right in to where I need?
Bearing crankshaft bad or failure theses is low pressure oil to yes or not
Oh and mine's already knocking that noise so I don't know if it's bad now or not I might just trash it
Ugh…. I have the low end knocking noise. Haven’t done the rest of the steps but I guess that means I need an engine. Also, my vehicle (95 sierra 1500) shuts off when driving. Not sure if that is the same issue or 2 issues such as fuel pump and engine failure. Needless to say I’m distraught as my other vehicle is also manifesting a low oil pressure. #oldvehiclejoys
Hi
sometimes I hear a voice like in your vedio in my car holden caprice 2008 ltz 8 slinder is that meaning i must change oil pump in my car or what
Regards
I have dakota slt I hear this sound in the morning when the engine starts for 5 seconds and then disappears
I have that high end noise, and my oil pressure goes from 275 to the last quarter of the indicator after a few minutes but stays stable in there even after hours of driving. Truck runs like nothing and there is no engine light on. A few months ago dealerships change the oil sensor before I bought it. What can I do ?
I’m having this happen but now the engine turns off what could that mean? I no longer move it
what is the normal oil pressure chevrolet colorado 2007 ?
+Cynthia Sáenz - Artista Visual This can vary depending on the vehicle's engine size. But generally, the ideal oil pressure is between 25-65 PSI.
Doing one as we speak lol
With that lifer noise that means you gonna need a need engine
😂
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍✌✌✌✌✌✌✌✌✌✌✌✌✌🌐🌐🌐🌏🌏🌏🌎🌎🌎🌍🌍🌍
Well my 2010 Chevy traverse is f*****ugh what a freaking nightmare don't buy a traverse they suck
90% of drivers would keep on driving , ultimately destroying their engines. Just saying..
Typical GM product