ULTIMATE EASY Router Table Build!
Vložit
- čas přidán 24. 05. 2021
- We broke our old router table, so we build this super simple Easy Router Table. This project goes super fast, and is very easy to assemble. With basic joinery and and techniques, a heavy top, and tons of storage, it would make for a great addition to any shop!
BASIC WOODWORKING ROUTER TABLE PLAN - bit.ly/JM_RouterTable2023
NEW ROUTER BUNDLE- SAVE $10 - bit.ly/JM_RouterBundle
SQUIRRELLY STICKS - bit.ly/JM_SquirrellyYT
SPONSORED BY WOODCRAFT - bit.ly/JM2021_Woodcraft
If you like this project you should check out these other shop projects!
- 3 LEVELS of Shop Carts - DIY to PRO Build - • 3 LEVELS of Shop Carts...
- 3 LEVELS of Sawhorses: DIY to PRO Build - • 3 LEVELS of Sawhorses:...
- ULTIMATE Woodworking Workbench Build with INSANE Geared Vices! - • ULTIMATE Woodworking W...
- ULTIMATE Shop Storage Cabinet Build - • ULTIMATE Shop Storage ...
If you love the channel, check these videos out too!
- 5 EPOXY Tips I Wish I Knew As A Beginner! - • 5 EPOXY Tips I Wish I...
- 10 EPOXY Mistakes Beginners Make - • 10 EPOXY Mistakes Begi...
- I Make a Guitar From BULLETS & EPOXY for Mat Best - • I Make a Guitar From B...
MERCHANDISE - shop.johnmalecki.com/
PLANS - www.johnmalecki.com/digital-p...
SAFETY GLASSES - geni.us/4h6xaM (Amazon)
Proudly Supported By:
Woodcraft - bit.ly/JM2021_Woodcraft
Timberland PRO - bit.ly/JM_TimberlandPRO
PIT BOSS - bit.ly/30Q9AeB
Lincoln Electric - bit.ly/JM_Lincoln
MAVERICK ABRASIVES - bit.ly/Maverick_JM. SAVE 10%- CODE: MALECKI10
BITS & BITS - bit.ly/JM-Bits CODE - MALECKI15 = 15% Off
My Top Tools and Product Affiliates
Woodworking Tools - kit.co/JohnMaleckiBuilds/wood...
Metalworking Tools - kit.co/JohnMaleckiBuilds/meta...
Favorite Finishes - kit.co/JohnMaleckiBuilds/fini...
My Camera Gear - kit.co/JohnMaleckiBuilds/came...
#RouterTable #EasyShopProject #BasicWoodworking - Jak na to + styl
Each video you guys do gets better and better! Very entertaining and not just some boring walkthrough. Keep it up guys. Much love from the UK.
I really appreciate that you keep doing project videos along with your other stuff. The mix up of all kinds of different content makes this my favorite channel!
You know why this video is great is because we see all your mistake and the fact you didn’t edit them out. It’s just a great reminder that no matter how good we are mistakes do happen. I believe this is what is missing in a lot of wood working videos today as sometime it’s better to see the error yow guys make so we can use that as a guide line for other projects in the future . I love your channel enjoy the build and looking forward for many more like this.
John is in so much better of a mood now that the kitchen is done. I feel that on a spiritual level.
Panhead screws from the backside of the lamination work well for laminations like this. Thanks for the great content!
can't wait to see another one like this.
Thank you
Very nice video this week boys. Project Turned out very well. Hopefully it gets great use out of it boys. Hopefully more above average coming soon. Keep up the great craftsmanship and hard work boys. Keep Making. Stay Squirrely. God Bless.
It's nice to see your Woodpecker tools scratched and used, not just in a case as so many youtubers are!
Thank you for this brother! Semper Fidelis!
Nice to watch a pro work so smoothly with such nice results.
It looks extraordinary for being so simple!
I have just started searching for after a router table and this idea, will change everything. The size, cost, the look ,just everything. Great work you guys and thanks for the great content
love your chanel and projects. keep it up 😄
Glad we could help Jonatan
I'm liking the punch sound effects in the background music.
Awesome build. Thank you for the inspiration for my next two projects: A workbench and a mini kitchen island.
Fantastic work on this one!
Great video! Thank you!
having those bit drawers open to the outside instead of the inside where I would be standing would drive me crazy. I love the channel and this won't stop me from watching. Now if only I could get a shop to start playing with wood like you guys.
Awesome work, John! Really fantastic looking router table! 😃
Stay safe there with your family! 🖖😊
this looks awesome! I've made plenty of mistakes like the backwards bit drawers but it would drive me crazy every time I opened it.
Sweet build...!!! Thanks for the video...!!! Semper Fi Brother...!!!
Huge fan John love watching your videos
Thanks!
this was awesome and learned a few things... thanks
You get me through study hall every Week
HUGE FACTS
Great build. Love it.
ive used thos draw slides on my work bench, love em
Cool router table. Thats my project for the winter comming. Yes, winter IS comming.....
Te quedo muy bueno!!
Love it!!
Love the big guy, with the big top spreading all that glue with the tiniest roller I've ever seen!
Will definitely ve making this and few other plans you have when I get my workshop back up and going. Just sold my old house and having to put in a new building at my new house, not been able to make anything for months now and about to go crazy lol.
OMG I need a squirrel-shaped "Stay Squirrely" wood pusher!
I haven't had nearly enough "Meat Sweats" this summer. CONGRATS ON THE HOUSE AND OURDOOR OASIS!
Beauty Build Gentlemen!
Perfect upload timing John. I’m about to start doing basically this but hanging from my table saw wing. Gonna steal some ideas.
an english dude called rag and bone brown recently did one so it could use table saw fence, might be worth a look
I think that it is very impressive, that despite you haven't been a dad for long, you have already mastered the "DAD DANCE"!!!
Great content thanks for sharing
youre the coolest person i know.
youre skills are crazy, i really do enjoy your content!
That is a great build.
These builds make me so excited to the point where I get gassy! Might have to make this for my shop 👍🏼
Entertaining build. I appreciate that you understood your audience, knowing (hopefully) that we know which side of the tape measure to read. Also appreciate that you left a goof or two on the video...makes you mortal, and not some perfect woodworking gawd.
The table itself is as good as any I've seen or built. Solid construction, stable materials and my personal choice for tabletop material. I do tend to use shellac for sealer...on all surfaces, top, sides and bottom...using a half-strength wash (equal parts shellac and alcohol) for the first coat, then two more coats straight from the can. Wax hell out of it, and top it off every now and then and that top will last as long as you will.
Great job, crew. Thanks!
Nice project
Super Nice Build Brother!
My ocd can’t handle that the vertical drawers are on the wrong side 😂
or no dust collection... it's flaring up big time
Watching this on the 21st night of December. I will not forget.
Good stuff dude.
Great build. When you get your other table fixed. I'll give ya $10 for that one. It looks like it only took you 18 minutes to build but I know casters can get pricey. lol
that is a nice piece! might make me one of those....
Nice job!
I'm 3 min into the video and all I can say is I love your energy. I can't really concentrate because I'm laughing so hard. Thank you for all the tips and info. ❤😊
It's 'Do you remember the 21st night of SEPTEMBER" yinz!
Thanks @T West!! I was wondering what the heck 21st of DECEMBER was all about, now it makes sense hahahaha!!! :)
I would like to see this video revisited as one of your "Good, Better, Best" videos.
Great channel Devil Dog!
"its a woodshop" - best quote of the year
I am starting to think that Jordan was never the problem....
Great build.
Those look a lot like KV drawer slides. They're great. Almost as nice as blum, but way less finicky.
I hope “Fix This Build That” Brad sees this video with the clamp trick. He’s gotta be tired of his stuff falling all the time. 😂 You guys and Brad are great. Keep it up. 👍
Can we please get a "Dammit Jordan" t-shirt? Also is Jordan ok? We haven't seen him in a bit.
You made a Hot Rod reference! I love you
Wow you inspire me. Gonna BBQ a whole turkey this weekend. Why you ask.....because freedom!!! You're the best. Please let us know when those " BECAUSE FREEDOM" shirts come out.
Nice video bro; Semper Fi!
Very good nice
In spite of the comedy and theatre,great build.
YES. Already subscribed
I really want that squirrel push stick ya got there
Located in 74 different states...I almost missed that. Love the confidence
We finally get to watch John do some actual carpentry and he screws it up like 3 times 😂 Poor Jordan
Good thing is, he is honest about it showing his mistakes. DAMMIT, JOHN!!!
Like your router table. You’re channel was suggested to me by pfwoodturning because I live in Pittsburgh.
Johns new father who is getting a lack of sleep is showing. Looks at backwards drawers that could just go on opposite sides and goes eh’ good enough.
If he switched the sides, the drawers would have to be flipped vertically which means he would lose a shelf of bit storage as it would be on the top where there is not enough room...
@@Bward216 just the face
@@MB12116 oh I see what you mean
Actually he did change it for the thumbnail of the video
New shirt idea. "Measure Twice, cut once, cut again." Or, "Measure Twice, cut once, blame Jordan!"
Were you reading my mind!? I was about to build one of these!!
K
Poop
If it were me and took the time to make it that nice, I'd have used Formica for the top vice sealing it with water lox. Once its down you'll have a hard slick surface forever.
So... Did Jordan quit because he got tired of you throwing him under the bus?
Semper Fi Bro and Merry Christmas
superglue between the masking tape. nice.
I think we need some "Dammit Jordan" merch
definitely gonna build this after I'm done with woodworking school 😩😇
Those drawers slides look exactly like the ones i make at Knape & Vogt
Love your videos , can you please tell me how to set up 3 legs on an epoxy table I have made ???measurements an spacing mostly?
I love this! Are you going to put some hardwood trim on the edges of the MDF top to prevent it from getting damaged?
Drill press station next? Maybe like Woodshop Junkie?
Awesome build, to bad you put the router bit slide in backward. My wife pointed it out(not me). lol
When you are standing there to change the bit you have to go around the slide to get the bit.
New dad woodworking.
in the shop i used the kreg forman
Awesome video, good ideas, educational, entertaining, funny, great all around. 👍👍
CanI get the plan for this build please I really need a good router table, and this is the one I want to do?
Maybe can try to build a bedside table incorporating Knapp joint. I think it will be challenging. 😉
LOL when he burns hinge holes manually while he has a pro hinge boring machine.
Would really love these plans in metric :( for sure ill try many of them
template for Get Squirly Push Stick? That is Awesome LOL!
hey man I know this doesn't need to be said but be careful pining the wood after the glue one of my buddies put one through his finger because it went in and bent back out
Hmmmm I detected a Yinzer... Looked you up, it's good to see a local (to me) doing good. (Even though you went to Franklin lol j/k The FR vs PT battles are some of the most exciting to watch). Great build, I may try and make one when I have more woodworking under my belt.
JM, watching you rolling the glue to laminate the MDF with the teeny weenie roller made me shoot coffee out of my nose. They do make larger rollers to expedite that process boss.
True, but it was just a simple glue up, and he wasn't gluing multiple pieces, so why waste a longer roller for that? Unless you meant larger in diameter, in which case those absorb more and aren't as good for glue ups...
Great video - thanks. What kind of router fence/fence mounting hardware did you use?
Minus the annoying music, I enjoyed the information. Thank you.
Man i have been on CZcams since CZcams came out. And ive never subscribed to a single channel. Not until i became a wood carver/turner/burner/builder. And im based out of PA as well. So you my friend are the first lol because of all the things we have in common.... keep up the good work and thanks for popping my cherry, ya f**king jerk haha
What type of red bins do you have for your screws? On the lookout for new bins.
How is the finish holding up on the router table. And nice video. Thank you for sharing.
hey man this looks awesome. could I retrofit these plans to cut everything out on my CNC router?
hey man awesome build! i hope you dont mind me asking, but i was really curious what router bits you would recommend? or maybe even a set that you trust?
Needs edge banding for the two pieces of mdf top.
I'm not gonna lie, I'm kinda liken this channel. I just might subscribe....maybe....And that thing is gorgeous ! (The build ) I really want one !!