04 Blazer 4x4 Vacuum Leak Fix and Story Time!
Vložit
- čas přidán 13. 02. 2022
- In this video, I show you where two common spots are for vacuum leaks in the four wheel drive system on your 91-04 Chevy Blazer, S10, GMC Jimmy, S15 and similar Vehicle. I also tell you a quick story on how this all went down lol...just my luck. Thanks for watching! Don't forget to share, like and subscribe for more. And as always...Stay Krazy!
Venmo @K30Krazy
Follow me on Instagram! k30krazy?h...
Follow the Bronco! / bennythe78bronco
Follow me on Facebook! / k30krazy
#k30krazy #storytime #chevyblazer - Auta a dopravní prostředky
@4:37 Look at that diagonally mounted, rusty colored bolt in the bottom right of the screen. DIRECTLY beneath that bolt is a nipple sticking out from the fender that the vacuum hose attaches to. The vacuum reservoir is inside the fender here.
Is it actually??? It took me a while to find that on the Internet to BEGIN with and then actually found it. Is it funny that the vents because I have the normal rwd truck, it's a Sonoma too. I was poking at it because well noticed the vents weren't working right I found that like going to no man's land and the one that goes down, that's the vents one. Then I was like "well where in heck does this go?" So I got something to plug it and well check the vents again and DAMN, THAT worked amazingly the vent moved great after that. That's where I found that looking for it but is it? Or is it a like fancy way to plug it off? It there for a reason I know that and they made it like that. I know the like first Gen ones actually have the vacuum reservoir attached to the hood. I don't feel like taking that apart, too lazy and I need to pull the tank possibly for a dumb fuel tank pressure code and find out what that is anyway. I'm kinda lazy on that but I gotta do it annoyingly and I actually looked up the vacuum reservoir on the second gen S10s and Sonomas but nothing came up for me.
I own a 2001 Blazer that I've already redone the vacuum lines on. I promise you, that's where it.
There is a bolt on the inner fender wall behind the anti lock box and the vacuum goes behind the bolt on the inner fender wall
I had same line issue and looked forever, found it goes to a Vacuum ball and it connect rite at the side wall the connection looks & feels like the end of a screw. Ull prolly need to find one in a junk yard to look at or approach a stranger at store tell them ur dilemma & ask to take a quick peek at theirs
Well you answers my questions about that vacuum line! I was missing the same one you put the cap on , thanks !
I'm glad it helped! Just here recently though I found out where that line goes and made a video about it. Hoping to post here soon so stay tuned for that.
@@k30krazy would love to see where this short hose goes
@@k30krazy I'd love to know where that line is supposed to go. Literally dealing with this exact issue.
Thanks for watching! Video is live now, go check it out!
@@shome78 I still couldn't tell where that short hose actually goes, I looked. So I put a golf tee in the end of that hose.
it goes to the fender there, its hard to get to and see but it controls you heat and air, that is what was wrong with mine..
Thank You for the INFO. 👍
And thank you for watching! Glad you enjoyed!
That vacuumed line your missing goes under the finder there's nub by the cruse control model
Thanks from western Colorado!
Thanks for watching! Glad it helped
Fender directly below the edge of the hood ther is a hard line under the black flap like three inches below the area ur at wher u capped that like
I got for a minute and look where that end where you put the cap if you look straight down in your Fender there's a bolt the connection is underneath that piece of metal to the right straight down where your cruise control is at
Thanks! After some digging here and there in my free time I actually figured that out about 2 weeks ago. Gotta do a follow up on it.
Very nice,. I have the same problems that you just described. Now at least I know where to look. Thank you so much for posting this video. ⭐⭐⭐⭐ ✌️
I'm glad it helped! Thanks for watching
It goes on the frame you gotta feel around it's between the abs pump and cruise control on the frame it's just a little nipple you can't see it,you have to feel for it
More then likely it goes to your drivers side fender under the hood its hard to see but its mouted to the side of your fender
So the capped line u have on the T there on toptucks under the fenderwell lip right about in line and theres a little stub that it dead ends to so technically its supposed to be capped anyway
mine isnt it controls my heat and air
I dont see where it goes that one on that tee next to fender
It goes to the reservoir inside the driver fender
It goes inside the Fender fender you're standing next to Is torch the Back firewall Is in Fender
The vacuum line go to the vacuum canister behind the abs pump on fender
That vacuum hose off of that check valve goes to a little nipple underneath the hinge on that side you can't hardly see it but there's a vacuum pod in that fender housing
how do you get it on very little room cant see it- think i will just cap it off like he did
@@mars188 I was able to get that 5:30 second hose between my fingers and stuff it on there get you a new piece of hose 😊
@@raydean well thanks for the reply but nothing wrong with the hose . some reason it cam off. hose looks fine. i have big hands . so irritating
It was a little tricky but I eventually learned where it went and did fix it.
@@k30krazy good deal! It's great when you can help someone just a little bit 😉
YA, I AGREE WITH PHIL -- HARD TO DEAL WITH ALL THE WAITING TIME FOR HIM TO FIND HIS WORDS.
Play it on 2X speed. Helps me on tons of drawn our YT videos especially the 10 min mark grabs out there
This is hard to watch with so many long pauses
Seriously though,
I couldnt watch
Anymore of this video, it
Stressed me out 💀🤣
it's underneath urs abs module in driver fender