Manoj just wanted to clarify. You suggest when setting up templates for smaller labels to choose "Print on a sheet of paper" (instead of the default on a roll of labels) which allows the user to first create the Page Size. You then demonstrate adding this margin on the left and right, however I'm wondering if we should also include the space between the labels as well? Typically our labels have 1/16" on each side as well as 1/8" between the labels. Is it easier for the labels to calibrate/stay calibrated if I include this space between labels so the printer does not have to solely rely upon the media sensor?
I've downloaded an image to the Zebra printer using the zebra font and image download tool. im hoping this would allow for better image quailty than simply inlcuding image directly in the label, but how do i reference the image from ZebraDesigner?
Hello, thankyou for sharing this knowledge. We need to make changes in ZPL Labels, so can you suggest which tool / software can we use so that can easily make changes in the existing ZPL Label format ?
is there a way to get the barcode itself to align from the barcodes center point? I am trying to figure out how to keep that aligned center no matter the length of the number sequence
Hello guys, I am about to buy a few printers for a project and just wanna know if there's any way to justify the barcode size. In other words, I have a limit of 15 characters; however, I would like the barcode to have a similar size if I use 6 digits or 15 digits. Could you help me with it? Thank you
I can't print jobs with multiple breakdowns using database without the jobs getting stuck in the printer queue (after all printouts are done). The data icon will keep blinking until i clear out the printer queue through command prompt. Any suggestion would be much appreciated.
Hello, I have bought Zebra ZQ120 recently. I am facing few issues. 1. Not able to connect through bluetooth to andoid mobile. But can connect to the iPad. 2.How to get print from iPad? I can design the barcode label in PC and how to open in mobile/ipad and print in zq120? I could do it from PC. Not able to find it in supporting videos or manuals. So please help me out.
Hello Mr. manoj , do I need to put the darkness settings every time ? because when I change in to darkness level to 30 after print and reopen the software it again goes back to previous setting ? how to fix that setting
how to set-up 10cm x 2 cm barcode sticker with 3 labels accross? when i try to do this it keeps saying dimensions defined are not compatible with printer
Thanks for the video, Manoj dear. I have a question. If we have the ZPL script, can we get a visual of the barcode in ZebraDesigner 3 (or later) so we can edit the contents and generate an updated .prn? Our developers are having a nightmare to meet our customers' demands by changing the ZPL in an editor rather than visually. We also tried 3rd party tools without tangible success. Thanks in advance to whoever responds.
I am using the free version of ZDesigner3 and it does not have the "PRINT" option so I cannot create PRN files and only gives me .nlbl files which the Zebra Utilities then won't open. Advice please as this is taking far longer than I need to get it up and running for work.
Hi thanks for the video, I would like to know how to wrap a variable text in zebra design pro. I am not very familiar with programming so not sure how to do it.
Hi, I'm using zq520 with cpcl and images don't get displayed when I use the prn file in c#. Any advice? What type of encoding is used in cpcl? Thanks in advance
I find that the ZPL source generated from the design tool is in sequence of as-and-when the object is placed on the label. How can I sort the complete ZPL code in sequence of X & Y axis irrespective of when the objects are placed on the label? Any help is welcome.
Thank you for your video, I cannot print my labels once I have created them. Down the left hand side menu there is no print option. I am using Zebra Developers for Designers 3. Can you help me with what might be the issue.
Why the code is generated in disorder??? if i forgot some label and put in the form at the end and this label is printing in the top; the code ZPL appears and the end of the file. Why de program not take the position por create the code?
We are using ZM400, Zebra printer. Created small label with Part no and model.. With Bar code ,QR code also for part no. Converted into prn. File and through PLC printing label with Label no.. Now we want to add printer date and Time along with part no.. In QR code.. Can any one help us. We are already printing date and Time in label FYI.
hi Manoj i have a little question how can i extract a label configuration for a print and edit ,for example i want the same label but reduce the size to 10 mm
Hello, for more information or additional support for ZebraDesigner , please visit social.zebra.com/6058kPYpn or alternatively visit our support community at social.zebra.com/6059kPYpX. Thanks
Hi, thank you for your comment, for all information on all of our Barcoded labels, please visit: www.zebra.com/us/en/products/supplies/labels-tags.html
Very Nice Video, when I am saving my label design as .PRN file and when opening it in notepad, I am getting all junk characters, it is not opening with ZPL code as shown in Video.
Hello, for more information or additional support for ZebraDesigner , please visit social.zebra.com/6050kkX6E or alternatively visit our support community at social.zebra.com/6051kkX61. Thanks
Hello. Thank you for reaching out. Please visit the Support & Downloads page for the ZebraDesigner 3 to find the help you're looking for: social.zebra.com/60515diy9
Hello Mohammad, for more information or additional support for ZebraDesigner V3 , please visit: social.zebra.com/6056Z2SfC or visit our support community at social.zebra.com/6057Z2Sfh.
Hello. Thank you for reaching out. Please visit the Support & Downloads page for the ZebraDesigner 3 to find the help you're looking for: social.zebra.com/60515diy9
What if I want to make multiple different labels like 2x1 that say Line 1, Line 2, Line 3, etc...
Manoj just wanted to clarify. You suggest when setting up templates for smaller labels to choose "Print on a sheet of paper" (instead of the default on a roll of labels) which allows the user to first create the Page Size. You then demonstrate adding this margin on the left and right, however I'm wondering if we should also include the space between the labels as well? Typically our labels have 1/16" on each side as well as 1/8" between the labels. Is it easier for the labels to calibrate/stay calibrated if I include this space between labels so the printer does not have to solely rely upon the media sensor?
I've downloaded an image to the Zebra printer using the zebra font and image download tool.
im hoping this would allow for better image quailty than simply inlcuding image directly in the label, but how do i reference the image from ZebraDesigner?
Hello, thankyou for sharing this knowledge. We need to make changes in ZPL Labels, so can you suggest which tool / software can we use so that can easily make changes in the existing ZPL Label format ?
is there a way to get the barcode itself to align from the barcodes center point? I am trying to figure out how to keep that aligned center no matter the length of the number sequence
And how do I print three columns with different information? Like three columns with the exactly information, but if different numbers on the barcode.
Hello guys, I am about to buy a few printers for a project and just wanna know if there's any way to justify the barcode size.
In other words, I have a limit of 15 characters; however, I would like the barcode to have a similar size if I use 6 digits or 15 digits.
Could you help me with it?
Thank you
I can't print jobs with multiple breakdowns using database without the jobs getting stuck in the printer queue (after all printouts are done). The data icon will keep blinking until i clear out the printer queue through command prompt.
Any suggestion would be much appreciated.
Hello, I have bought Zebra ZQ120 recently. I am facing few issues. 1. Not able to connect through bluetooth to andoid mobile. But can connect to the iPad. 2.How to get print from iPad? I can design the barcode label in PC and how to open in mobile/ipad and print in zq120? I could do it from PC.
Not able to find it in supporting videos or manuals. So please help me out.
Hello Mr. manoj , do I need to put the darkness settings every time ? because when I change in to darkness level to 30 after print and reopen the software it again goes back to previous setting ? how to fix that setting
how to set-up 10cm x 2 cm barcode sticker with 3 labels accross? when i try to do this it keeps saying dimensions defined are not compatible with printer
Thanks for the video, Manoj dear. I have a question. If we have the ZPL script, can we get a visual of the barcode in ZebraDesigner 3 (or later) so we can edit the contents and generate an updated .prn? Our developers are having a nightmare to meet our customers' demands by changing the ZPL in an editor rather than visually. We also tried 3rd party tools without tangible success. Thanks in advance to whoever responds.
Hello Hovsep, for more information or additional support please visit: www.zebra.com/us/en/support-downloads.html
Sir I'm using gt800 printer, real time clock support this printer
Thanks for creating such a wonderful videos.....Great Job..
Hi Manoj... Can I use datamatrix instead of bar code image?
Hello sir, what are the requirements from zebra printer side to communicate with beckhoff plc via ethernet mode?
I am using the free version of ZDesigner3 and it does not have the "PRINT" option so I cannot create PRN files and only gives me .nlbl files which the Zebra Utilities then won't open. Advice please as this is taking far longer than I need to get it up and running for work.
Hi... I need to setup nutrition table in panel with 2 columns and 8 rows in 100x90 label. Please help in this
Hi thanks for the video, I would like to know how to wrap a variable text in zebra design pro. I am not very familiar with programming so not sure how to do it.
Hello, for more information or additional support, please visit: social.zebra.com/6050kWbhw
Hi, I'm using zq520 with cpcl and images don't get displayed when I use the prn file in c#. Any advice? What type of encoding is used in cpcl? Thanks in advance
Hi, For more information on the topic of this video, please visit: www.zebra.com/us/en/support-downloads.html
I find that the ZPL source generated from the design tool is in sequence of as-and-when the object is placed on the label. How can I sort the complete ZPL code in sequence of X & Y axis irrespective of when the objects are placed on the label? Any help is welcome.
If the auto-cut feature is disabled, how do we fix it? Zebra zt 230
does this work with the LP 2844 printer?
how can we generate prn if with different font for my case i need Monospac821 BT bold font, when i select this it does not reflect in prn script
Hello. to get help with your query please visit: www.zebra.com/us/en/support-downloads.html
This video was very helpful.
Thank you
Does QR code changes for different product or it remains same ?? Please reply.
Thank you for your video, I cannot print my labels once I have created them. Down the left hand side menu there is no print option. I am using Zebra Developers for Designers 3. Can you help me with what might be the issue.
Hello Caroline, for more information or additional support for ZebraDesigner V3, please visit: social.zebra.com/6056w8YVI.
Why the code is generated in disorder??? if i forgot some label and put in the form at the end and this label is printing in the top; the code ZPL appears and the end of the file. Why de program not take the position por create the code?
How will i know the stats for example how many steakers i have printed so far
We are using ZM400, Zebra printer. Created small label with Part no and model.. With Bar code ,QR code also for part no. Converted into prn. File and through PLC printing label with Label no..
Now we want to add printer date and Time along with part no.. In QR code.. Can any one help us.
We are already printing date and Time in label FYI.
Thank you so much for this video, mate!!
I need to print something from a individual device .but it asking for "scan printer alias"
What to do,please help .
hi Manoj i have a little question how can i extract a label configuration for a print and edit ,for example i want the same label but reduce the size to 10 mm
Hello, and thank you for reaching out. Please visit the ZebraDesigner 3 Support and Downloads page for more information: social.zebra.com/6059wFGIR.
Thanks for the video.
Different between Zebra desinger software and bartender software
Isnt the big sales technique on Zebra all about how it scans all the label gaps ect?
Is there a command for the text to be in an arc format?
Hello, thank you for your comment. For more information on the topic of this video, please visit: www.zebra.com/us/en/support-downloads.html
why is there no MacOS version of this?!
This was very helpful. Thanks heaps 👌
Comment il est possible d'enlever les lignes vides pour n'imprimer que les informations. Merci
Hi Michelle, For more information on the topic of this video, please visit: www.zebra.com/us/en/support-downloads.html
can we give multiple barcodes after importing excel file into zebra designer or anyother option, ???
Hello, for more information or additional support for ZebraDesigner , please visit social.zebra.com/6058kPYpn or alternatively visit our support community at social.zebra.com/6059kPYpX. Thanks
Hi I created bar code design some products name are very big it will goes to next labels
Hi, thank you for your comment, for all information on all of our Barcoded labels, please visit: www.zebra.com/us/en/products/supplies/labels-tags.html
Very Nice Video, when I am saving my label design as .PRN file and when opening it in notepad, I am getting all junk characters, it is not opening with ZPL code as shown in Video.
Hello Harish, for more information or additional support for ZebraDesigner V3 , please visit: social.zebra.com/6054X4juw
why "justify" button/menu is not available ?
Great Video! Is the ZebraDesigner V3 compatible with all Zebra label printers, such as the ZebraZD230TD? Kind regards
I have question when i print labels
Let's say 10 labels it's printing 30labels
Every third is printed.. How can i set it to print continually?
Hi Nikola, For more information on the topic of this video, please visit: social.zebra.com/6051kDptP
How to give serialisation and next no how to show
I have zebradesigner v3, but there is no print button.. I can only print a sample. Does anyone know why?
Hello, for more information or additional support for ZebraDesigner , please visit social.zebra.com/6050kkX6E or alternatively visit our support community at social.zebra.com/6051kkX61. Thanks
Will it do QR codes?
ok how to print courier labels from PDF ?
Hi there,
How can I add google fonts to my ZT410 printer
Hello, for more information or additional support for the ZT410 Printer, please visit: social.zebra.com/6053Zbebt.
how can i put intercharacter gap ? if i want to print variable data as xxxxx xxxxx xxxxx xxxxx
Thanks for reaching out. Please visit the ZebraDesigner 3 Support and Downloads page for more information: social.zebra.com/6059wFGIR.
My printer print empty labels how do i fix that. THANK YOU
Hello. Thank you for reaching out. Please visit the Support & Downloads page for the ZebraDesigner 3 to find the help you're looking for: social.zebra.com/60515diy9
i have problem with database login
How do we Increase The Size Of Barcode....???
Hello, For more information on the topic of this video, please visit: www.zebra.com/us/en/support-downloads.html
are there also colors ? i know about black but thats it :D
Thanks for reaching out. You can learn more about ZebraDesigner V3 here: social.zebra.com/6058wt2ZA.
How to download zebra designer
How to export to itf file ?
Hi, For more information on the topic of this video, please visit: www.zebra.com/us/en/support-downloads.html
Sir please reply
How to cancel multiple commands
Hello Mohammad, for more information or additional support for ZebraDesigner V3 , please visit: social.zebra.com/6056Z2SfC or visit our support community at social.zebra.com/6057Z2Sfh.
6:17 that moment when Windows Updater upstages the speaker
This video for useful
How to ensure that a barcode does not repeat again in zebra designer 3
Any option in this s/w enable and disable barcode repeat process
okey
Pls reply sir
Imagine my surprise when the boss bought this crap and my surprise when label designer doesn't come in the package whit already too expensive zd421.
Seriously what's with the base you're trying to blow my speaker so I can hear you speak.
Zebra documentation is VERY BAD. Your website is so disorganized and it is extremely crappy
I barely understand his pronunciation!
Agreed, worthless...
@@timjoseph887 Tip for this : use the Subtitles, xixixi.
Manoj facing some problem in Zebra application need your help. how to contact you?
Hello. Thank you for reaching out. Please visit the Support & Downloads page for the ZebraDesigner 3 to find the help you're looking for: social.zebra.com/60515diy9