Make Your Own Sanding Belt
Vložit
- čas přidán 14. 12. 2020
- 📢 #HandmadeCreativeChannel📢
📢 Subscribe My Channel - / @handmadecreativechannel 📢
Hello friends, today I want to show you 2 of the best ways to make Your Own Sanding Belt. For this purpose we need to use a hot air gun, 2 boards, Textile Sandpaper, Super glue and Glue C300. In the video I make 4 tapes, 2 of which with super glue and 2 with C300 glue. I will show you the easiest way to remove abrasive particles from the sandpaper. I recommend making sandpaper that is glued at angles of 45 degrees. at 45 degrees there is more area on which the glue is applied.
This is a video Make a Belt sander - • Make a Belt sander @Wa...
📢 #HandmadeCreativeChannel📢
📢 Subscribe My Channel - / @handmadecreativechannel 📢
Friends, my name is Jordan, am the author of the Handmade Creative channel.
On this channel I present everything that I have done with my own hands. I enjoy sharing Projects I make as a Hobbyist, and what i have learned through other content creators, I am NOT a Professional, not a Teacher, my hope is I simply Inspire you to go make something yourself. We turn simple things into unique ones! Subscribe, it will be interesting!
-Creative ideas
-useful tips
-homemade tools
- hacks
- review
-toys - Jak na to + styl
45 degree cut. 2.5 inch wide strip of nylon fabric. (parachute material or simular) Butt up the joints and saturat the nylon strip with super glue. Place it even on the 45 degree joint and place saran wrap over the strip and clamp or firmly hold down for about 60 seconds. Trim excess material and let hang over night. I have made a few thousands of these. Most for me but some for other knife makers. They hold up, quick to make, very durable, and anyone can do it.
Some of you guys amaze me,there are several much faster ,easier, and just as sufficient ways to do this.i had my last belt break on a jobsite and the hardware store was clised,closed, had a roll of actual ups grade box tape,I put some on the back of the belt,finished the job an 2 other jobs before I finally decided to change it out,that a temp fix but worked well,no glueing,gluing, or any of that,10 minutes and was back to work.the heat didn't even loosen the tapes grip.
Mate your a f### en Genius. I can actually now make my own sanding Belts in whatever size and grit I want. I have got a couple of older machines that I can't get belts for or there to exspensive. Plus I want to custom make a sander with different size rollers on it, and now I can because I now know how to do the belts. Cheers , will checkout more of your stuff.
Thanks my friend, in my channel you can see many videos and in any video i will show tips and tricks for easy making. 👌👍
exactly
Good!
Genial
where do you get the roll material?
i faced a problem with super glue it makes the joint brittle and less flexible, so if it works and did not blow it creates a bump, what do you think?
Super Glue is not for this Job
@@HandmadeCreativeChannel is not that what you have used on the first joints?
Which chemical is the best to bind/joints the sand paper
There is no need to peel both the ends. Peeling the end which will go in the bottom is sufficient.
Please remove the music .. we'd like to hear the sound of work ..
I looked everywhere for a vid on making sanding belts where the creator actually spoke instead of pointing. I've checked out four so far, no talkies. Weird but maybe only mute guys make belts.
As important, or more important than the manufacturer's arrows is to make sure that the top layer of the joint is pulling along the bottom layer. If you drive it the other way a tool will dig into the high spot and rip the joint apart.
Link to the c300 glue 👍
Výsledky překladu
I think it is
www.vector.bg/produkti/items/categoryId/5074/%D0%A1-300-1
@@JJ-sb6qb Thanks! seems like Ordinary PVA Glue