Mini Apes on Harley Davidson Street bob Dyna.. Motorcycle Handlebar install ..Sydney motovlog
Vložit
- čas přidán 11. 11. 2020
- Hello all, in this video you will see how i installed 10 inch mini ape #handlebars on my #streetbob Dyna. #HarleyDavidson.
Without boring you with the stuff you've seen before, i just point out the key things to look for.
☆SUBSCRIBE☆COMMENT☆LIKE☆
Bike: Harley-Davidson #Dyna Streetbob
Location: Sydney
Camera: GoPro Hero5
I actually just put these on my '20 street bob and love them. I did have a couple issues with wiring the right hand side, but it all worked out. Look great feel great. Thanks for the review
Nice. Did you need to change the cables?
@@BRUISER1 I actually just extended them myself. They ended up being about 4" short or so. I just took my time, soldered up then heat shrinked all the wires back up. I did make the fly by wire a little long, but it was getting late and I was tired. What did you use to fish the wires thru ? Man, I had a hell of a time with the right side
@@BRUISER1 no, did not change the clutch or brake line at all.
@@riceddy7420 Thats good. the softail streetbob and the dyna streetbob had the same handlebars on them anyway so its a essy conversion.
Nice!
I have a 2014 Fat Bob and was curious about changing out the stock drag bars for these exact bars!
They look great!
Thanks mate. I'm really happy with them. If the cables were long enough, I'd even give 12" a go. But these are so comfortable.
And because they cheap, if i dont like them its no big loss.
Bars look great mate, black bars look loads better imo mate 👍
Thanks. 100% on looks better. Still getting used to them. Standard bars felt more comfortable, but that'll change.
Looking good brother! I just received mine. Same style but they’re 12 inch apes.
Thanks mate. I think i should have gone with 12. Hopefully no issues with the cable length.
@@BRUISER1 definitely an issue with the cable lengths. But it works for now. I really like them!
They Look Awesome Bruh,,Suit the Bike %100..Those would Definitely be my Choice too.. FKN AWESOME !
Yeah mate really pleased with them. Thank you.
My only concern is that they're from China and cheaper compared to popular brands that sell for $400 plus.
@@BRUISER1 Only thing I'd have done is Thoroughly Sprayed inside with Mako Spray ,,its like WD but oil based ..I did my Chassis/ frame through all possible Holes to prevent Corrosion from Inside..
@@paulhorvath9784 well done. Thats sounds thorough.
@@BRUISER1 sell them and get a custom made set. they areworth it 100% and better imo.
@@Cheaps928 Thanks. Its over a year now and they still good. Maybe should have gone with 12inch.
Hey man great vid! Looking to do the same to my ‘17 Fat Bob. How are the bars holding up? I got a similar brand from China and am somewhat nervous about trusting them (being only $120 and from China)
Thanks mate. I've gone on a few highway rides and also commuted to work and they are perfect.
I pushed them forward a bit just to make them sit higher.
Hello Bomber looks awesome what year is your bike? My apologies if you mentioned it and I missed it
Thanks mate. Its a 2015 streetbob dyna
Going to do this job today, thanks for the tips.. Let you know how it goes 😅
Don't rush.
I just got another set of 12inch bars and I'm swapping them over.
I've got the service manual and watched multiple videos, written out my plan 😅🤞🏴☠️
@TheTrueMetis good work brother. You'll be fine.
@@BRUISER1 I got it done, bit fiddly but looks awesome 🤘
Nice work. Do you have a link from Ebay for the bars?
Thanks mate.
www.ebay.com.au/itm/Motorcycle-Fat-1-1-4-Bars-12-Rise-Handlebars-For-Harley-Davidson-Sportster-XL-/232637497076?_trksid=p2349624.m46890.l49292
These are the 12" .. i couldn't find the 10 inch rise, dont know why. Its not appearing.
Great video!... Did you cut off a little of the bar ends?
Thanks mate. No i didn't. Check out the second video, it shows that the brake cylinder fits as is, otherwise the bar is too thick
@@BRUISER1 Thank so much!... it came out awesome!!!
@@anthonymontoya1142 Its very comfortable. I tilted them forward a bit. Everyone tells me they real suit the bike. 10 inch is the highest i can go, using the standard cables.
How did you like the feel of them being wider while riding? Any issues tightening the hand controls snugly?
Im loving them. I pushed them forward just a bit and they felt more comfortable. No issues at all.
Getting heaps of compliments on the look.
@@BRUISER1 Yeah I have been looking at these bars for a while now. I think I'll finally make the jump! Appreciate the video! I was wondering if you think you could have gotten away with 12s with the stock cables and wiring?
@@jaybourbon8608 Would have been very close with 12 inch. Probably would depend on the tilt angle of the bars.
@@BRUISER1 Yeah I'll just go with the 10s. My other bikes are 16 and 18 inch rise I'll keep this one more sleek.. Appreciate the video and the comment brother.. Oh.. Hey gotta ask.. You know anything about the relays on this bike? I can't find it anywhere. Need to find out if it's compatible with led turn signals. Or at least for the front to be swapped. I don't want hyper flash.
@@jaybourbon8608 Thanks for the feedback brother. Not sure about the relay. I have LED as front indicators but that was done by the previous owner. Good luck mate.
This a 10” inches installation, do you have the video for the fat ape handlebars? Please
Correct this is the 10" , but the 12" was exactly the same. I didn't make a second video because you can just copy this one.
So stock handlebar is size10''?
Yes
Do you have a link for the front blinkers?
Hey sorry no I dont they came on the bike. I actually wanted something similar for the rear as well. 🤷♂️
@@BRUISER1 yeah they look nice. How are you liking the 10" mini apes? Currently looking at a 07 street bob and want these exact bars.
@@kingb8824 Thanks mate. The bars are getting a lot of praise. People telling me they are exactly what the bike needed. But also comfortable.
@@BRUISER1 How tall are you? Are they shoulder height for you?
@@kingb8824 I'm about 175cm (5'9) . They are about chest high. The standard Streetbob bars are also 10" but the curve is slightly different. Dont get me wrong was very comfortable with the other bars and easy control of the bike. These are almost the same, but just look so much better.
They still going good?
Yeap.. I've seen videos of Chinese bars snapping so I check mine but no issues. 👍
Shame about the weld quality on the inside, big improvement, concidering ordering them!
thanks mate..its doing good so far, been over a year with zeero issue. Its priced low enough to give it a try an dbin it if you dont like it.
China bars on a Harley? 🤮
I know...budget ..but hey no issues. Strong and sturdy