This is still new and Andrew was working pretty hard to get it released, so expect it to be a little buggy early on for now. That said, its probably the best interior modeler for me personally just based on how powerful it is and how easy it is to use.
It is important to draw your rooms clockwise. Walls have an inside and outside. If you find cabinets are snapping to the wrong side then you drew the walls counter-clockwise.
The CG Essentials - I forgot to add first and foremost, great video! Very clear explanation / demo! I posted the error I was receiving on Andrew's site.
If someone has this cabinets placed outside the wall problem - just make sure your measure line is outside when you draw the wall, then their whole orientation will be just fine.
Good stuff! If anyone else didn't immediately understand what the measure line is, it is the thin gray line visible next to the wall when you build it. If you build the room clockwise, I think you'll be good.
Have only started messing around with the walls and i am already in love! Thank you so much for sharing! I am still very much a noob to Blender, having only been using it for a few months. Can manually make a low poly model and have used the built in Archimesh but this seems leagues ahead and looks like you can end up with some pretty high quality lay outs. And hopefully learn a lot more with Blender in general using it! Look forward to watching more of your vids! Thank you again! Cheers!
If your Blender keeps crashing when you click on products, its because most of the addons are broken with the new blender version, try to use it in blender 3.6.5
At 8.00 minutes - the reason the cabinet is snapping to the outside of the room is because walls have an inside and outside and so you have to build your room in a clockwise direction. You built this anticlockwise. I didn’t work this out by the way … Andrew mentions it in a video! Good to know though.
Thank you for the great tutorials. I got a problem, with adding doors and so on, everytime I click on a door to move it to the walls, I got a error on it. I can`t add anything to my 4 walls and floor. I have followed your video. Do you had any problem with this ? or have any suggestions to what to do. I have windows 10 and no error on installing the blender or addon. everything is fine. I also enabled the phyton, so I have all the products, but I can`t add them to my building. I have also selected the walls before I try to add. I will go back to 2.4 and the simple version of it for now. I am a newbe and still learning, but thanx to your videos I have come very far in learning, so thank you for your videos.
HOLY CRAP!!!!!! I made a room, and I am for all points and purposes a blender idiot. Used CAD for 30 years, yeah I'm old, started playing with blender. Looking for a local crack dealer to get me through the learning curve. Saw this and thought, yeah sure let's try it. HOLY CRAP, ok, I've decided the creator can be president of the world, get all the hot chicks, whatever he wants. This is friggin amazing. Like seriously. Ok my room may be a bit moronic, I have a toilet and bath six feet from my kitchen, but I was just trying it. A few false starts, all my fault and then, quick as hell, room, cabinets, floor, lights, doors. Still a huge amount to learn, need to figure out how to get more stuff to put in the rooms, but seriously, get this if you are doing any architecture, if nothing else than for the absolute ease of laying out floors. I did see with massive regret his overlay for blender that made it less of an insane workspace, wish it was still being updated💯
Please include conversions to mesh in the videos. How do we convert these hooks to mesh for exporting or editing? Also, I am sure we could incorporate our own models into this kit somehow...
Can I add some custom materials-textures from the net or self generated textures? I would like to add some marble textures on the kitchen front. thx and thx for the tutorial.
I can't close the room properly. The last wall, does not blend the angle with the first wall. 4 wall room. the floor also goes a little further than the walls. I get the developer still working, maybe he'll fix it in further updates. Installation went fine
I've got a problem. When i drag to place a cabinet it doesn't automatically snap to the wall and I can't rotate it properly. Do you have any solutions?
bro the popup menu that you talked about to run python scripts, when I check that checkbox and run it, it closes my complete blender file, and disable the addon when I reopen it again
im curious if i can make custom assets to be used with this addon to build a cartoony set for my character and if not can i mold the geometry into the shapes i want
This is awesome but i'am having problems with the pyton scripts when trying to place products in the scene, u talk about a little menu...but i dont know what u mean, i need heeeelp please!
Whenever I try to reload the library, which for me is empty, Blender crashes. When I relaunch blender, the addon is disabled. After enabling the addon again, the library is still empty. Is there something else I have to install? Trying on blender 4 and Home Builder 3. Thank you
Getting an error trying to install. I've captured the actual error (replaced my specifics).. Stats: macOS Ventura 13.2, M1Mac, Blender Version 3.4.1 (3.4.1 2022-12-20) This happens upon clicking to enable Home Builder checkbox: Traceback (most recent call last): File "/Applications/Blender 2.app/Contents/Resources/3.4/scripts/modules/addon_utils.py", line 333, in enable mod = _import_(module_name) File "/Users/name/Library/Application Support/Blender/3.4/scripts/addons/home_builder/_init_py", line 19, in from pyclone_ops import pc_assembly File "/Users/name/Library/Application Support/Blender/3.4/scripts/addons/home_builder/pyclone_ops/pc _assembly py", line 30, in from reportlab. pdfgen import canvas File "/Users/name/Library/Application Support/Blender/3.4/scripts/addons/home builder/python libs/reportlab/pdfgen/canvas.py", line 16, in from reportlab import rl config File "/Users/name/Library/Application Support/Blender/3.4/scripts/addons/home_builder/python_libs/reportlab/rl config py", line 45, in DEFAULTS-_defaults_initt) File "/Users/name/Library/Application Support/Blender/3.4/scripts/addons/home_builder/python_libs/reportlab/rl config.py", line 13, in _defaults_ init from reportiab. lib. utils import rl_exec File "Users/name/Library/Application Support/Blender/3.4/scripts/addons/home_builder/python_libs/reportlab/lib/utils.py", line 15, in from PIL import Image File "/Users/name/Library/Application Support/Blender/3.4/scripts/addons/home_builder/python_libs/PIL/Image.py", line 103, in from . import imaging as core ImportError: cannot import name ' imaging' from 'PIL' (Users/name/Librarv/Application Support/Blender/3.4/scripts/addons/home builder/python libs/PIL/ init_ .py) Hope this is helpful
Fantastic video! superior review! Never tried this tool, looks great. And i see anything for architect there. Making walls/door/windows isn't architecture)))) and there are a ton of tools way better in blender from box. By the all, awesome work. Thanks
hi there, I noticed my Blender file started getting so slow after adding so many walls, doors and windows. For this project, I'm working on real scale 1:1. Is that the reason it's slow? I'm afraid I'll have to redo the whole work in a smaller scale. Will that help?
Let me start by saying; love the tutorials, that's why I'm a subscriber. I tried to use Homebuilder by I'm getting this error when I try to drag and drop anything "PYTHON ITraceback" and something about a file hb_ops.py.and a bunch of switches. Can you help me figure this out or point me in the right direction to get answers? Thank you for your time. >>> >>>
Can this be used for non-right angles and the ability to save/reuse assets? There are towers I'd like to create that are circular so I'd like to make use of that, if it's an option.
I use floor plans to create dispensary buildouts and the one thing I find frustrating is the ability extrude walls inward to create inner spaces. It always snaps to where the last wall ends. Any thoughts on what I am missing?
when i click products, about, build, decorations, it crashes blender who closes up itself with no warning and I lost my progress. Even after opening as administrator and having python 3.11 installed.
i installed this, hit n, got a totally different little menu that shows 1 cabinet, 1 handle, i have no main setup menu. i installed the toybox and home builder library, no idea what i am doing wrong
@@craigmurrayauthor There aren't any libraries on the page that I linked to in the comments, just one file labeled Home Builder 3. I think you went to the wrong page and downloaded and older version or something
@@TheCGEssentials I discovered the stupidity of my ways. Downloaded multiple packages and try to install them all over top each other. I will continue my 3D learning from the short bus. I did notice the toilet goes to the wrong side of the wall
Hi everyone! Let me know what you think about HomeBuilder in the comments below! :)
I've been wanting to use Blender as an architectural visualization tool so this awesome!
Can u create tutorials on speedtree?
@TheCGEssentials my right click is not opening the prompts what should I do pls tell me😢
Build the walls from right to left to fix your problem with snapping, kitchen cabinet
Sorry left to right will work properly withe the snapping
so glad to have all this stuff for free.. Thanks to all the developers and artists.
This is still new and Andrew was working pretty hard to get it released, so expect it to be a little buggy early on for now. That said, its probably the best interior modeler for me personally just based on how powerful it is and how easy it is to use.
men , all i can say is thank u for the effort and time u spend sharing these great videos with us , thank u soo muuch meen
Glad you like them!
It is important to draw your rooms clockwise. Walls have an inside and outside. If you find cabinets are snapping to the wrong side then you drew the walls counter-clockwise.
So intuitive and simple. Can't thank you enough.
Glad you liked it!
Thanks Justin and Andrew for bringing such great work...
This is cool; it helps a lot in creating the interior fast and also works fine with Mac. Thanks Justin!!!
thanks a lot for your architectural add-on updates. 👍
The CG Essentials - I forgot to add first and foremost, great video! Very clear explanation / demo! I posted the error I was receiving on Andrew's site.
If someone has this cabinets placed outside the wall problem - just make sure your measure line is outside when you draw the wall, then their whole orientation will be just fine.
Good stuff! If anyone else didn't immediately understand what the measure line is, it is the thin gray line visible next to the wall when you build it. If you build the room clockwise, I think you'll be good.
i didnt test it yet, but u also can see where its facing and changin it perhaps?
i many appreciate that you shared this precious add-on with us !
Have only started messing around with the walls and i am already in love! Thank you so much for sharing! I am still very much a noob to Blender, having only been using it for a few months. Can manually make a low poly model and have used the built in Archimesh but this seems leagues ahead and looks like you can end up with some pretty high quality lay outs. And hopefully learn a lot more with Blender in general using it! Look forward to watching more of your vids! Thank you again! Cheers!
It reminds me of good old Fluid Designer, but much more newer and seems like without more furniture. Good add-on to remember
Looks great. thank you for sharing.
If your Blender keeps crashing when you click on products, its because most of the addons are broken with the new blender version, try to use it in blender 3.6.5
thank you
Man thanks to the dev.. Will support them .. with some money soon
Hey Justin this is so helpful, thank you so much!
Is there a way to configure windows to see through them like a glass? Great tutorial . Thanks
At 8.00 minutes - the reason the cabinet is snapping to the outside of the room is because walls have an inside and outside and so you have to build your room in a clockwise direction. You built this anticlockwise. I didn’t work this out by the way … Andrew mentions it in a video! Good to know though.
Blenderbim has also improved a lot. You should revisit it.
Thank you for the great tutorials. I got a problem, with adding doors and so on, everytime I click on a door to move it to the walls, I got a error on it. I can`t add anything to my 4 walls and floor. I have followed your video. Do you had any problem with this ? or have any suggestions to what to do. I have windows 10 and no error on installing the blender or addon. everything is fine. I also enabled the phyton, so I have all the products, but I can`t add them to my building. I have also selected the walls before I try to add. I will go back to 2.4 and the simple version of it for now. I am a newbe and still learning, but thanx to your videos I have come very far in learning, so thank you for your videos.
3.0.3 has been released and fixes the Mac issues I reported below - I figured since I mentioned below, I would bring good news this time.
Thank you for sharing.
WOW- Un F'n Believable! Love this!
It's a good one!
HOLY CRAP!!!!!! I made a room, and I am for all points and purposes a blender idiot. Used CAD for 30 years, yeah I'm old, started playing with blender. Looking for a local crack dealer to get me through the learning curve. Saw this and thought, yeah sure let's try it. HOLY CRAP, ok, I've decided the creator can be president of the world, get all the hot chicks, whatever he wants. This is friggin amazing. Like seriously. Ok my room may be a bit moronic, I have a toilet and bath six feet from my kitchen, but I was just trying it. A few false starts, all my fault and then, quick as hell, room, cabinets, floor, lights, doors. Still a huge amount to learn, need to figure out how to get more stuff to put in the rooms, but seriously, get this if you are doing any architecture, if nothing else than for the absolute ease of laying out floors. I did see with massive regret his overlay for blender that made it less of an insane workspace, wish it was still being updated💯
great add on, thanks for this video man.
Thank you 🙏
That was awesome
another fantastic video thankyou
Please include conversions to mesh in the videos. How do we convert these hooks to mesh for exporting or editing? Also, I am sure we could incorporate our own models into this kit somehow...
Brilliant!
Awesome!
Can I add some custom materials-textures from the net or self generated textures?
I would like to add some marble textures on the kitchen front.
thx and thx for the tutorial.
Andrew is a legend!
Thanx
getting a lot of errors when trying to install
Same, Blender 3.4.1 for Mac
Is there a way to add custom sci fi doors and windows? There's some real potential in this tool.
complimenti...👏
Is there a roof top available to view the exterior design?
I installed it and it reported some errors. I can't even uninstall it as it will give me more errors. I have Blender 3.4.1.
I can't close the room properly. The last wall, does not blend the angle with the first wall. 4 wall room. the floor also goes a little further than the walls. I get the developer still working, maybe he'll fix it in further updates. Installation went fine
Almost similar to archipack addon....its a good addon
And Archimesh? which is already in Blender as an addon.
anyone getting a delay on the cursor when drawing walls? my mousepad wont even follow the direction when i draw walls
how do you get the products menu (as in how do you get the option to download those cabinets, doors, etc.)?
hey your problem was you can only draw clockwise in homebuilder. if you draw any other way that will happen
Seems like a great Ad on, except for making diagonal walls. All walls have to be at right angles.
Hiya. Any chance you could make a video using construction lines for modeling architecture visualization
I've got a problem. When i drag to place a cabinet it doesn't automatically snap to the wall and I can't rotate it properly. Do you have any solutions?
hello when I click on the piece of furniture it is impossible to have the menu to modify it?
bro the popup menu that you talked about to run python scripts, when I check that checkbox and run it, it closes my complete blender file, and disable the addon when I reopen it again
Is it possible to keep measure lines visible, once a wall, or a room is made?
im curious if i can make custom assets to be used with this addon to build a cartoony set for my character and if not can i mold the geometry into the shapes i want
Now does one do roofs ?
This is awesome but i'am having problems with the pyton scripts when trying to place products in the scene, u talk about a little menu...but i dont know what u mean, i need heeeelp please!
the author has a yt channel where he post details, updates, and a full tutorial soon I think. www.youtube.com/@andrewpeel1996
Whenever I try to reload the library, which for me is empty, Blender crashes. When I relaunch blender, the addon is disabled. After enabling the addon again, the library is still empty. Is there something else I have to install? Trying on blender 4 and Home Builder 3. Thank you
Hi!! Success in your channel, could you tell me why my right click does not work, there's no menu, do I need to change the setting in Blender?
how do i go into the object context menu
everytime i try to place a product or select a tab it crashes blender. does anyone know how to fix it im not finding much
thanks
Do you know if you can create your own products or do you have to download them premade through the homebuiler library?
@TheCGEssentials my right click is not opening the prompts what should I do pls tell me😢
I need help! Is it also possible to "draw" curved walls? If yes please someone explain me how it works!!!
It would make my life so much easier
Getting an error trying to install. I've captured the actual error (replaced my specifics)..
Stats: macOS Ventura 13.2, M1Mac, Blender Version 3.4.1 (3.4.1 2022-12-20)
This happens upon clicking to enable Home Builder checkbox:
Traceback (most recent call last):
File "/Applications/Blender 2.app/Contents/Resources/3.4/scripts/modules/addon_utils.py", line 333, in enable mod = _import_(module_name)
File "/Users/name/Library/Application Support/Blender/3.4/scripts/addons/home_builder/_init_py", line 19, in from pyclone_ops import pc_assembly
File "/Users/name/Library/Application Support/Blender/3.4/scripts/addons/home_builder/pyclone_ops/pc _assembly py", line 30, in from reportlab. pdfgen import canvas
File "/Users/name/Library/Application Support/Blender/3.4/scripts/addons/home builder/python libs/reportlab/pdfgen/canvas.py", line 16, in from reportlab import rl config
File "/Users/name/Library/Application Support/Blender/3.4/scripts/addons/home_builder/python_libs/reportlab/rl config py", line 45, in DEFAULTS-_defaults_initt)
File "/Users/name/Library/Application Support/Blender/3.4/scripts/addons/home_builder/python_libs/reportlab/rl config.py", line 13, in _defaults_ init from reportiab. lib. utils import rl_exec
File "Users/name/Library/Application Support/Blender/3.4/scripts/addons/home_builder/python_libs/reportlab/lib/utils.py", line 15, in from PIL import Image
File "/Users/name/Library/Application Support/Blender/3.4/scripts/addons/home_builder/python_libs/PIL/Image.py", line 103, in from . import imaging as core
ImportError: cannot import name ' imaging' from 'PIL' (Users/name/Librarv/Application Support/Blender/3.4/scripts/addons/home builder/python libs/PIL/ init_ .py)
Hope this is helpful
Fantastic video! superior review! Never tried this tool, looks great. And i see anything for architect there. Making walls/door/windows isn't architecture)))) and there are a ton of tools way better in blender from box. By the all, awesome work. Thanks
same
I have this same error
can someone explain this error with a video???
@@AsianXKiddo The error was with the import process. It’s been resolved with the new version.
is anyone having an issue where i can't right click to bring up any prompts?
Guys please help I can t use promts in home builder
the link not working can provide me with the addon plz
I can't add furniture in Blender 3.5, the only functionable is draw wall, floor & light room. Is it a bug? 😥
hi there, I noticed my Blender file started getting so slow after adding so many walls, doors and windows. For this project, I'm working on real scale 1:1. Is that the reason it's slow? I'm afraid I'll have to redo the whole work in a smaller scale. Will that help?
Let me start by saying; love the tutorials, that's why I'm a subscriber. I tried to use Homebuilder by I'm getting this error when I try to drag and drop anything "PYTHON ITraceback" and something about a file hb_ops.py.and a bunch of switches. Can you help me figure this out or point me in the right direction to get answers? Thank you for your time.
>>> >>>
Can this be used for non-right angles and the ability to save/reuse assets? There are towers I'd like to create that are circular so I'd like to make use of that, if it's an option.
I'm not sure if this is the right tool for towers, though I suppose it depends on the kind of towers you're trying to create
I use floor plans to create dispensary buildouts and the one thing I find frustrating is the ability extrude walls inward to create inner spaces. It always snaps to where the last wall ends. Any thoughts on what I am missing?
yeah, same to me. I think it still doesn't work as well for more complex walls
wow this is so cool
What kind of License is this? Can I use as commercial purpose?
I wonder if you can use this to make game content for use in Unity.
when i click products, about, build, decorations, it crashes blender who closes up itself with no warning and I lost my progress. Even after opening as administrator and having python 3.11 installed.
Most of the addons are broken with the new blender version, try to use it in blender 3.6.5.
This addon has been crushing Blender whenever I try to go to the libraries. The wall component works though. What might I be doing wrong?
I had this too in Blender 4.0+, but it ran fine in 3.6
I am not able to drag and drop the components, as it says some sort of python error.
Looks like a great product but it fails to install on blender 3.4.1 running on linux
I tried on a Mac running 3.4.1 and on a PC running 3.4 and it won't work for me as well
what would you recommend between home builder and archipack?
Definitely Home Builder if it has what you need
@@TheCGEssentials thanks for your reply :)
wow
Looking good!
@@TheCGEssentials agreed
I keep getting a scripting error when I try an add door or windows or any assets were do I turn on the python script
👏
Hi there!
Doesn't work. I get a trace back notice on installing.
i installed this, hit n, got a totally different little menu that shows 1 cabinet, 1 handle, i have no main setup menu. i installed the toybox and home builder library, no idea what i am doing wrong
...the Toybox? I think you might have installed the wrong thing
@@TheCGEssentials I installed the 3 files the creator had listed, the add on and 2 libraries
@@craigmurrayauthor There aren't any libraries on the page that I linked to in the comments, just one file labeled Home Builder 3. I think you went to the wrong page and downloaded and older version or something
@@TheCGEssentials I discovered the stupidity of my ways. Downloaded multiple packages and try to install them all over top each other. I will continue my 3D learning from the short bus. I did notice the toilet goes to the wrong side of the wall
What I don't understand is, how the moldings work.
I'm guessing this only works on PC? Tried installing on my Mac and just get a bunch of errors.
I got the same thing on my mac😪
this product will not install on 3.4.1 stable or 3.5 beta 0r 3.6 alpha. i am using linux
ANDREW PEEL IS THE MAN. I MADE THE SPLASH OF THE HOME BUILDER 2 FOR HIM. ❤❤❤❤
Ernest teaches Blender
Make a short video when you find a solution to the furniture and walls problem
и почему на русском ютубе нечего нет об этом дополнении
The assets are great but the addon itself is just... annoying? Pointless? Cumbersome?
The thing that makes the assets work?
crash .....
Your intro is so creepy 😅😂😂
الله يهديك للإسلام
Very Annoying Intro !
Does anyone here know how to do multiple floors? when I try to do the second floor it tries to place the walls on the first even if I remove the floor