Viper 5901 remote start error fix
Vložit
- čas přidán 10. 09. 2024
- 5901 won't start vehicle; gives an error.
Plug key into ignition, turn it on, press (car start button) chirps 7 times means: manual transmission setting is on. In order for the viper to start the vehicle we need to turn it off.
This is an educational purpose for those with an AUTOMATIC VEHICLE ONLY!
RIGHT ON!!!!!! FINALLY AFTER A LONG DAY OF REMOTE START NOT WORKING AND SURFING THE WEB FOR ANSWERS THINKING I HAD TO GO BACK TO ALARM SHOP!! BUT FINALLY CAME ACROSS THIS VIDEO PERFECT SHORT AND RIGHT TO THE POINT THANKS FOR A GREAT VIDEO. REMOTE START WORKING ON THE DIME
DUDE YOU SAVED MY LIFE!!! lol I was about to toss a match in my truck and walk away! totally work THANKS
big thanks to this guy I just did it on my viper 5806v model and it worked, may God bless you and your family
I cannot express enough gratitude for your help in this video. Liked and subscribed thank you so much, just like the many others before me, it worked on my viper 5906v.
Thank you very much. I read up on it online and still couldn't figure it out. Nobody made it as simple as you made it I'm glad you are here to help idots like myself. Thank you again for all of your help!
Remote start would not work but lock/unlock and alarm would. Did exactly as video and solved my problem. Thanks so much!!!!
8 year old video still helps, thanks a bunch
You saved me i saw alot of videos and nothing mine was on valet mode and couldn’t remote start my truck i did what you showed us and worked Thanks man i really appreciate it god bless!!
Good video!!!! My remote start not working for 6 months. Now work's thank you so much 👍👍👍👍👍👍
Hey pro I want to thank you for posting this video
I called my body at Stereo shop and he could not figure out and watching this video saved my day and money so
Million thanks to you
Hey buddy,thanks for posting this..its a big help for me. you save my time and money..my remote wont start after i replace my avalanche with new battery. i reprogram it so many times, but nothing happen. only the lock/unlock will function. i try to experiment the push botton,luckily sometimes it will start but if i open the hood, remote doesnt start again. then ive found your tutorial..boom! success..very helful..cheers : )
Thank you, ran through various videos and yours did the trick... happy wife, happy life😁
You are amazing.Thankyou very much it worked and helped me.My vans remote is back to normal after following your steps.
This worked perfectly. I never reply to videos but this helped me out do much!!!! Thanks a million
Thanks a ton bro, saved me a ton of research and potential going to a viper dealer, I don’t comment much but had to say thanks on this one.
My remote battery died and I had to resync my remote with the system (I actually have the 5704 system but they look to be the same). After I did this resync, my remote start function did not work. The Viper manual does not state how to fix this. The procedure in this video worked perfectly! Thanks so much for your help!
Hello want to Thanks for the information provided by you the car been sitting for a week because of needed resetting...work great for me and Thanks again..
thanks man seeing somebody do this made all the difference
Thanks! It worked for my Viper 4806V remote starter.
Thank you very much! It worked on second tries.
Adding to original tech tips.
This is apply to
- Tundra 2011 Automatic
- Viper: alarm security and Remote starter model 5706v
- DBALL2 XpressKit
Symptom of the error
- Remote starter on remote depressed.
- Remote start mode kicked in
- ERROR
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note: I did not hear any chirps at all on the first try. This procedure worked by follow the LED status on the Viper Control Center with blue LED model 5706v
How to switch Manual MODE to Automatic Mode on remote starter
1- Open door.
2- Insert key turn to ON, then OFF
3- Press and HOLD the VALET button (Control Button) and pay attention to status LED on the "Control Center"
- LED flash ONE time (keep holding)
- LED flash TWO times (keep holding)
- LED flash THREE times, then let go.
4- Press the VALET button (Control Button), then let go quickly
5- Press and HOLD the VALET button (Control Button) until
- LED flash TWO times, then let go.
- Press Unlock button on Viper remote
Turned key to ON, then OFF, then REMOVE key.
Voila, it worked!!!
Good video I was having this problem and your video helped me! Thanks man!
You are the man bro. Thank you so much my remote start works now. Haven't had it working for about a yean
Now whooop whooop 😃
I have a 2006 Toyota Avalon with the 5305v Viper Remote Start , and I turn it on with the remote and runs for about 3-5 seconds then turns off by itself , the car is a push to start, not sure if that’s what makes it do that, what can I do to fix it , or what kind of module do I need
Thanks fpr your help it rrally helps me alot. Got my start remote back on
This worked 🙌🏽 ThankYou!!
I really appreciate it! Yes 😎 😎
thanks, man!
worked w/ my Viper 7752v.
it worked just like you said, thanks..!
It really helped my problem mine was on Valet mode and couldn’t remote start my truck did what you said and everything went back to normal i have the 7756v Viper remote start
My is the 5996v worked great!!!!
Great it solved my problem too.
HUGE THANKS💪🏼💪🏼💪🏼💪🏼
It worked!!!!!!! THANK YOU!!!!!! Holy shit i was about to lose my mind!!!!
DUDE THANK YOU SO MUCH FOR THIS!!!! IT WORKS!! WOOOO!!!!
It worked. Thanks for the video
Thank you you saved the day!!
This really helped me today thanks
lol the only thing I was doing wrong was that I didn't know how to complete program. did everything but never saw direction to turn key to on then off again. lol. thanks. After, just in case someone has same issue, if tach signal low, and you are using data instead of hardwire, change tach input to voltage instead of virtual tach. Same procedure but instead of 1 press after 3 chirps, it's 2 presses. THEN, if your car still doesn't stay on after remote start, turn the car on with key, immediately hold control button until LED stays solid blue, then turn off car and try remote start again.
Do you think this would work for the 5806?
fix my problem 100% good
Worked thank you!
You're the man thanks
LIFE SAVER!
THANK YOUUU. IT WORKED
You just saved me thanks heaps
hi i have prostart ct-3371 you think its work or no?
Thank you so much it worked ...
I have the avital remote, when I try to start, it studders I have to restart again.
it worked on my 5806 !
I press the remote start button then the car turns on as if the key was turned to the mode before ignition then off. It does this 3 times then the remote makes the error noise and says remote start error.
Will these work with 5906
all of a sudden my remote start doesnt work
the car keys on but doesn't crank what could it be?
Good job it works for me, Thanks
THANK YOU SOOOOO MUCH IT WORKED😭😭😭😭😭
This didn’t work for me, infact i was shocked for a short minute haha i started the car with the key and noticed that when I turned it off at the switch the car remained On/Running engine and I remember if you step on the brake that it would shut off. And it did... maybe i did something wrong.. I thought i had it.
Thank you
Can this be put back in manual mode?
Viper sst does respond and doesn't stop resetting what to do please help
Is there a way to tell when the beeps happen if you do not have a sirein installed?
Angus Rankin yes ur receiver thing on ur windsheild will flash instead of beep.... But make sure ur fob says its unlocked
Ok my car starter is not working properly. Model #7756V... On a 97 lincoln town car (no bypass) The problem is weird... It gets the signal to start, then dings and dash comes on fuel pump runs, then clicks and does not crank...it does this 3 times then i get an error. I can start car with key. Hood safety works as it should. Its not in manual mode. Pls any sugestions would be greatly appreciated.
drew41428 hi i have same issue on my 2013 mustsng. Still trying to figure it out.
Harpreet Singh yea that sucks.. thanks 4 the info. If u find something pls let me know it would be greatly appreciated. 😎
I cant find anything online about it. I might just have to take it to the shop
drew41428
Were you ever able to get that fixed? I have the same issue. When I press the auto-start, my truck acts like it wants to turn on and it shows the runtime timer on the remote, but then the the truck 'clicks' off and the remote beeps and shows, "remote start error."
Nope 😢 im about to just buy a new car lol
It works!!
This fucking worked!
Thank you!
Amazing!!!!!
Also do you know how to use car 1 and 2?
aw man, thanks for the video - didn’t work for me unfortunatley. going to have to take it to a shop. I found the programming/installation manual and can see what’s actually happening (you’re choosing the 3rd menu, then choosing the first option “automatic/manual” then choosing option 2 (automatic), then done. and I figured that out, but after setting it to automatic, I still get the error but instead of 7 blinks, I get 8 now. and 8 is a neutral-safety switch problem that is *only* related to manual-transmission installations, but my ’08 accord is an automatic. This sucks!
Thanks
I tried to do this but when I hold the valet button it never chirps any idea?
I have the same problem, did you able fix it?
No man I took it to a local shop for sound systems they said they had to plug in the computer to reset it to automatic transmission
Bad ass thankssss
also check for a bad conection on your battery terminals corossion causes an error for me it did
Thank you so much i thought i screwed up my alarm system. I have a viper 5904 and i deleted it memory and then re paired and it wouldn't start.Thankfully i found your video. Again thank you so much. Do you know how to make it so that instead of having 12min to run just shorten it to 5?
Thanks it worked.
1:27 to disable manual transmission permanently
I bought a Viper alarm/remote starter for my last new car. I am very disappointed and dissatisfied with Viper do to the poor quality of the main remote that has bad cracks all around the outside edge of the remote. I glued with crazy glue but it is no longer holding together. It should have a metal edge around the entire outer edge. It looked like it std but they are tricky in fooling the customer. It is painted plastic to look like metal. I resorted to the one way remote but can not tell if doors are open or closed. Plus.. my car continuously remotely starts accidentally because of poor design. I paid about $650 and will never buy another Viper product.
Help on the 7346V
Clearly you don't know the viper alarm very well.. WITHOUT THE KEY the car will shut off once you press the breaks or even try to open the hood. the door remains locked when you start the car with the viper alarm
can anyone help with the 5704
This worked fine for mine 5704. In case anyone was wondering.
DannyNov28 8g
didn't work I have a 5305v viper
Did not work for me
It took you wayyyy too long to give these instructions.
Dude seriously take the marbles out of your mouth
All the vipers sucks,garbage remotes garbage evrything.
WTF
DONT WORK FOR ME, STILL APEAR - REMOTE START ERROR-
WAS SAYING BEFORE - LOW BATT- I GUESS HAVE A BAD BATTERY AND I REPLACED AND NOW SAY -REMOTE START ERROR- I DO EVERYTHING YOU EXPLAIN IN YOUR VIDEO BUT SAME THING, DONT START THE TRUCK.
Did you ever get it to work? I figure it out yesterday I'll help you if you need it.
The problem here, was a dball bypass kit, i checked and need to reprogram and now works fine, thanks a lot buddy i apreciate your help.
It works!! Thank you !!!