REMARK x Zero Auto Factory Catback Exhaust for Honda S2000

Sdílet
Vložit
  • čas přidán 28. 12. 2023
  • Remark S2000 Exhaust:
    emnotek.com/products/remark-2...
    Mita MS-10 Wheels
    Front: 17x8 + 53mm, 225/45/17 Firestone Firehawk Indy500
    Rear: 17x9 + 63mm, 255/40/17 Firestone Firehawk Indy500
    Restotuner hardware: www.restotuner.com/product-pa...
    MITA Wheels: www.mitamotorsports.com/produ...
    OEM Honda Rubber Trim: amzn.to/3L4E98w
    BaysonR AP1 Front Lip: www.ebay.com/itm/393135820926
    Energy Suspension 19mm Sway Bar Bushing Kit: amzn.to/3XLoMoQ
    Subframe Brace Kit: amzn.to/3J3vp1K
    Blox Adjustable Sway Bar End Links: amzn.to/3QXiTmd
    Hankook Ventus V2 195/50/15: amzn.to/3CUaXfI
    Ryobi 3/8" Impact: amzn.to/3QNa91Z
    CRC Corrosion Inhibitor: amzn.to/3A5zzBz
    Rustoleum Silver Wheel Paint: amzn.to/3udFEGw
    Rustoleum Clear Wheel Paint: amzn.to/3tbPJ5A
    Rustoleum Etching Primer: amzn.to/336O86a
    Innovative B-series Shift Linkage: amzn.to/3gBVZRp
    Energy Suspension Shifter Bushings: amzn.to/3vgLRl4
    Blox Weighted Shift Knob: amzn.to/3eojiv2
    Replacement Rear Hubs: amzn.to/3slPa9j
    Trailing Arm Bushings: amzn.to/2Pkh3k0
    Carworx Refinish Restorer: amzn.to/37DkurU
    Car Cover: justdriveshop.com/products/cr...
    Instagram: @crxseth / crxseth
    Amazon: www.amazon.com/shop/crxseth
  • Auta a dopravní prostředky

Komentáře • 56

  • @denniskong
    @denniskong Před 5 měsíci +2

    11:16 That "somebody/guy" must be a really cool dude 😉

    • @crxseth
      @crxseth  Před 5 měsíci +1

      Shout out to Dennis Kong for the rear bumper cap! You’re the man!

    • @denniskong
      @denniskong Před 5 měsíci

      @@crxseth the pleasure's all mine 😉

  • @Busydadgarage717
    @Busydadgarage717 Před 5 měsíci +7

    Love it! Also, shout out to Shawn. As we get older, harder and harder to get homies to help as we are ALL super busy!

    • @crxseth
      @crxseth  Před 5 měsíci +5

      Absolutely!! He was a huge help and glad to have him as a friend, especially one so interested in cars as I am.

  • @AWD_T
    @AWD_T Před 5 měsíci +2

    Sounds perfect for a street car. Love the hardtop too

  • @hectorgirona9639
    @hectorgirona9639 Před 5 měsíci +3

    Perfect deep tone and not even a spec of rasp i can’t even imagine paired with a good quality header

    • @Patrick94GSR
      @Patrick94GSR Před 5 měsíci +2

      Just saw that LHT Performance is developing a new S2K header design which will no doubt be awesome.

  • @justincole9572
    @justincole9572 Před 5 měsíci

    Glad to see you back at it after the holidays! Happy New Year!

    • @crxseth
      @crxseth  Před 5 měsíci +1

      Thanks! My intention was to record a lot during my two week vacation from work, but I just didn’t feel up to it so I slacked off some.

  • @sopit666
    @sopit666 Před 5 měsíci +1

    The S2000 looks badass.

  • @Jahsani
    @Jahsani Před 5 měsíci +1

    Sounds great, the catalytic converter really helped out.👍🏾

  • @Fackler91
    @Fackler91 Před 5 měsíci

    It's perfect. Nice upgrade

  • @newhirunworn1
    @newhirunworn1 Před 2 měsíci

    Look and sound great! I just did T1R single on my 05. I love it so far.

  • @Daniellihomes
    @Daniellihomes Před 2 měsíci

    Great compliment to the oem+ vibe. It has a nice mature sound.

  • @juniorzidak6771
    @juniorzidak6771 Před 5 měsíci +1

    Absolutely love my Center Exit Remark exhaust on my Corolla Hatchback (e210)!

  • @RS-xz5hr
    @RS-xz5hr Před 3 měsíci +1

    Great sound, just wish the manufacturer would make a twin outlet.

  • @victorwilks88
    @victorwilks88 Před 5 měsíci

    sounds amazing buddy

  • @rushmatic
    @rushmatic Před 5 měsíci +1

    That has to be the best helmholtz resonator I’ve ever seen… Wow!

    • @crxseth
      @crxseth  Před 5 měsíci +1

      To be honest, for the loudest setting I’m using, that resonator is completely blocked off. It has a plate with a small hole that can be used to get quieter, as well as removing the plate for the quietest setting.

  • @andrewmoser6630
    @andrewmoser6630 Před 5 měsíci +1

    Sounds perfect.

  • @SuperHonkyPodcast
    @SuperHonkyPodcast Před 5 měsíci +2

    CRXseth drops a new video, I watch it, I like it. Seems legit!

    • @crxseth
      @crxseth  Před 5 měsíci +1

      Thanks!

    • @SuperHonkyPodcast
      @SuperHonkyPodcast Před 5 měsíci

      No problem. You blew me away with what you did to that old beat up CRX. Can't wait to see what you do with this S2000!@@crxseth

  • @SaimKhan-kj8mg
    @SaimKhan-kj8mg Před 5 měsíci

    Good work

  • @carlosarellano4
    @carlosarellano4 Před 2 měsíci

    Thank God and ODOT we don’t have to deal with Rust like our East 😮 Oregun-
    Sounds Soooo Good 👍

  • @OneKauz
    @OneKauz Před 5 měsíci

    That side resonator makes it sound great

    • @crxseth
      @crxseth  Před 5 měsíci

      It’s actually completely blocked off.

    • @Athon08
      @Athon08 Před 4 měsíci

      Isn’t that to get rid of exhaust drone?

    • @crxseth
      @crxseth  Před 4 měsíci +1

      @@Athon08 That, and to make the exhaust quieter. You can block it off completely for loudest setting, use the block off plate with a hole in it for medium loudness, or no plate and use the resonator fully for quietest sound.

    • @Athon08
      @Athon08 Před 4 měsíci

      @@crxseth oh nice. Cool you can tune it

  • @chrisdovenbarger4329
    @chrisdovenbarger4329 Před 5 měsíci +1

    It’s sounds a lot better

  • @CrxBreizh
    @CrxBreizh Před 5 měsíci +2

    Hi Seth,
    Isn't it risky to use the impact screwdriver near the lambda sensor?
    I read in the workshop manual that the O2 sensors are very sensitive to percussion.

    • @crxseth
      @crxseth  Před 5 měsíci +1

      Gotta do what you gotta do to get the job done sometimes.

  • @chriswotton6929
    @chriswotton6929 Před 5 měsíci +2

    Sounds so much better but single exit is playing hell with my OCD 😅

    • @crxseth
      @crxseth  Před 5 měsíci +1

      Once that bumper cutout is covered it’ll be great. The little 2.0 liter 4-cylinder doesn’t need two mufflers!

  • @feelthatfeelthat
    @feelthatfeelthat Před 5 měsíci +1

    Pain the cover the same color as the body. Will look way cleaner!

  • @michaelgrefteter8712
    @michaelgrefteter8712 Před 5 měsíci

    Love the S2000 and great sound not those what makes pops and bangs but one thing please use the safety cap on de angle grinders I have seen things when it goes wrong and that not funny to see.

  • @frankiebob7345
    @frankiebob7345 Před 5 měsíci

    Specific comment at the dreaded 3400 rpm drone would be good. All sound good runnign through gears of vtec. Hemholtz resonator must be closed to set up a standing wave at drone frequency. And that one is huge! Never seen one after the normal resonator. I have a Red 2001 S2000. Good video! Thanks

    • @crxseth
      @crxseth  Před 5 měsíci +1

      I’m not familiar with the drone issues at certain RPM’s so I’m not sure how this will fare. I haven’t really driven it much since install but I’m sure it will be great based on my experience thus far.

    • @frankiebob7345
      @frankiebob7345 Před 5 měsíci

      After market exhaust have a nasty tendency to drone at constant speed rpm around 3300 to 3400. Sound clips often intentionally run through that spot so it does not occur and sounds great@@crxseth

    • @sdothayden
      @sdothayden Před 5 měsíci +1

      The extra canister on the driver's side should help alleviate mid rpm drone. HKS uses similar designs on their exhaust now for this reason.

    • @Mind2kill
      @Mind2kill Před 5 měsíci

      It will still drone mate even with the quietest setting. i got the HKS 75MM and drones a bit between 3k and 4k.. bought a silencer for the exhaust and it gets way better.. it hurts the sound a bit tho.

    • @frankiebob7345
      @frankiebob7345 Před 5 měsíci

      Yes thats the Hemholtz. S2000 slang for the OEM one is Donkey Di*k is in front of the Resonator. I have seen the HKS works very well@@sdothayden

  • @sideshow45
    @sideshow45 Před 5 měsíci

    I always heat up the flange surrounding the studs and air hammer them out. Dont point it towards glass though. Lol

  • @DarkasA80
    @DarkasA80 Před 5 měsíci

    Why not dual exhaust?

    • @crxseth
      @crxseth  Před 5 měsíci +2

      Not really any need, and this exhaust is the sound I was looking for. I will block off that bumper cutout soon.

  • @cambo_soup96
    @cambo_soup96 Před 5 měsíci

    got to love rusty bolts. smh we all have our fair share of them.

  • @ap5824
    @ap5824 Před 5 měsíci

    It sounds awesome , but the S2000 doesn't look right , with one exhaust outlet.

    • @crxseth
      @crxseth  Před 5 měsíci

      Once the bumper is blocked off, it’ll be great. That empty bumper cutout is awful, I agree.

  • @diamonddetails9445
    @diamonddetails9445 Před 4 měsíci

    Add some Honda Fit, and I'll... SUBSCRIBE 😮

  • @ChrisNLger
    @ChrisNLger Před 4 měsíci +2

    Don't like the look. This car needs a 2 tips exhaust.

  • @dimametis5239
    @dimametis5239 Před 5 měsíci

    По-моему двигателю плохо, слишком много дыма, Он наверное кушает масло надо поменять маслосъёмные колпачки. 😂🤣😂🤣

  • @broccolisamurai3930
    @broccolisamurai3930 Před 5 měsíci

    Doesn't sound worth the price.

    • @crxseth
      @crxseth  Před 5 měsíci

      What would you expect for the price?

  • @clintonswart6670
    @clintonswart6670 Před 5 měsíci

    worse.