How to Replace an A/C Valve WITHOUT Recovering Refrigerant

Today I replaced the low side schrader valve on my '06 Ford F150. I used a valve core remover tool that allows for removal of the valve without major loss of refrigerant. This also means that you do not have to recover or vacuum the system, saving time and labor. This same process applies to many different makes and models.
As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Thanks for supporting the channel.
Mastercool Master Valve Core Remover Set 58490
amzn.to/3fxHo8D
Mastercool Standard Valve Core Remover 81490
amzn.to/34xZEII
A/C Pro Self-Sealing Can Tap
amzn.to/2MSsEWq
A/C Pro Recharge Hose (For Self-Sealing Can)
amzn.to/3sOw7Ve
Yellow Jacket R22, 134A, 404A Gauges
amzn.to/3e8Gfnx
Taylor Instant Read Pocket Thermometer
amzn.to/3sS8zyU
Elitech Refrigerant Leak Detector
amzn.to/3c78r7R
A/C Pro Leak Detection Kit
amzn.to/3e7JlIB
FJC Oil and Dye Injector
amzn.to/3e8GPSf
Due to factors beyond the control of NutsAndBoltsAuto, it cannot guarantee against unauthorized modifications or improper use of this information. NutsAndBoltsAuto assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. No information contained in this video shall create a guarantee, expressed or implied, of a particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not NutsAndBoltsAuto

[@NutsandBoltsAuto]

Here's some things you may need:
Mastercool Master Valve Core Remover Set 58490
amzn.to/3fxHo8D
Mastercool Standard Valve Core Remover 81490
amzn.to/34xZEII
A/C Pro Self-Sealing Can Tap
amzn.to/2MSsEWq
A/C Pro Recharge Hose (For Self-Sealing Can)
amzn.to/3sOw7Ve
Yellow Jacket R22, 134A, 404A Gauges
amzn.to/3e8Gfnx
Taylor Instant Read Pocket Thermometer
amzn.to/3sS8zyU
Elitech Refrigerant Leak Detector
amzn.to/3c78r7R
A/C Pro Leak Detection Kit
amzn.to/3e7JlIB
FJC Oil and Dye Injector
amzn.to/3e8GPSf

[@analazcano6475]

Please tell me you in Houston, i need help with my AC, i want to learn to do it by my self, but i need someone to guide me, yes i have VACCUM and gauges, yes im a mechanic, but never worked on AC

[@WV591]

whoever invented this tool was briliant.

[@QualiLap]

Clear and concise instructions - no bs. Thanks man!

[@chanteb3972]

Thanks for the info! Most informative video I've seen

[@terryhites1]

Wow!! Someone is very ingenious!!!

[@johnswilley6764]

Excellent job of explaining the rationale and the demo. Thank you very much Sir! Best wishes.

[@NutsandBoltsAuto]

You are welcome!

[@jimmcmaster6227]

What a genius, time saving tool!

[@johnb9825]

Very good video... Especially how you demontrated what was happing inside during removal & install

[@keytothegate68]

Very nice tool. It works as a bypass. Holds the air with one valve while you remove the other

[@vincenttong4705]

Great instructions for a newbie like myself.

[@johnswilley6764]

Very good job there with your explanation, thank you Sir!

[@matthewstorm5188]

I actually tried using this tool on my Accord about a year ago. And it was just a little bit too small to fit on the port. It DID fit on the high side port of my other car. But NOT the Accord. It’s like it was maybe 10 mils too small (or something minuscule like that). Not sure if maybe it was made out of tolerance as far as the ID. But I ended up having to send it back.

[@operationsword9457]

Got a cheap one of these. it didn't grab the shrader when unscrewed. I put a tiny dab of butyle tape on the end to pull it out and replace. Be sure to remove the butyle remnant before capping.

[@randallmontejano7787]

That's a great tool to have and great video like always señor.

[@S-Kidz]

Thats a really cool tool.

[@MrGeorgeferreira]

very good explanation and video buddy..excellent.thanks

[@donaldhawkes5226]

Nice explanation thank you

[@jasongraham3488]

Well done.❤

[@anthonyvasquez7050]

This is badass !

[@josenava3656]

Awesome thanks

[@pjt-kl7mb]

Your showed to use the one on the top of the case for ford and after the half video you using a diferent valve ,so which one is the right for ford ??

[@jaimevargas6850]

Do you know what shraeder valve core size is for chevy Tahoe 2005?, thanks for your help 🙏🏼👍🏼

[@chriss4365]

Anyone know if all of these valves are the same size or does each vehicle have a different size schrader in the ac?

[@fastsvo]

can this be used on the high side (R12)?

[@EmilGhiurau]

I just tried 2 different tools and none of them match the 2017 Ford Explorer. I can’t find anywhere just the tool for that model unless I get the whole kit ($500)
Do you know where I can get the tool for 2017 Ford Explorer?

[@Ochtane101]

Great video! 👍Where can you pick up that set? The tool, to remove the shraeder valve?

[@beast_0012]

Bread👍

[@ride856]

no purge?

[@roltyd22]

Will a leaking low side port cause compressor to turn on and off?

[@jimdavidson5208]

YES. Your charge is low. You have a leak. Research R-152A or canned air computer duster.

[@randal4776]

Looks like a lotta work to me.

[@gillysmob]

ughh

[@amino1406]

So how do you know this valve needs to be replaced?

[@lisasisk3713]

you pit a little spit on the valve and if it bubbles, it's leaking.

[@jimdavidson5208]

When yous leaks crazy.

[@YOUARESOFT.]

CAN I RENT THIS TOOL

[@jimdavidson5208]

NO

[@osvaldomcs1213]

Forgot to release the air from valve removal tool first. If not jus instraduced air

[@runningwater5936]

No, with the AC system pressurized, no air will enter.