Fujifilm X-S10 | 10 Important Camera Settings
Vložit
- čas přidán 11. 07. 2024
- In this video, I share 10 important settings that every Fujifilm X-S10 owner should know about! These settings are often overlooked but will solve many trouble spots you may find yourself in with your Fujifilm X-S10 or perhaps any Fujifilm camera.
Buy the Fujifilm X-S10: amzn.to/2IPdbnW
✨ RBP Lightroom Presets (50% off): reggiebphotography.com/fujifil...
🚀 Fujifilm Photography Bootcamp: reggiebphoto.thinkific.com/
🎬 Check out my Behind-the-Scenes videos: • BYE FULL FRAME. HELLO ...
🙏 Consider supporting the channel over here: / reggiebphoto
🎧 Keep learning 24/7 with a free audible trial: www.audibletrial.com/reggiebphoto
📷 💼 My Fuji-X Wedding Photography Kit:
2x Fujifilm X-T3: amzn.to/2XIXDEN
Fujinon 16mm 1.4: amzn.to/2VLk9Lp
Fujinon 23mm 1.4: amzn.to/2EXVyh3
Fujinon 35mm 1.4: amzn.to/2XQ3lEO
Fujinon 56mm 1.2: amzn.to/2NUNyAo
Fujinon 90mm 2: amzn.to/2VM7S9E
Holdfast MoneyMaker Camera Harness: amzn.to/2EXASpg
Other Fuji-X Gear:
My favorite compact everyday lens, Fujinon 18mm 2:
amzn.to/2VNUyBt
My favorite compact portrait lens, Fujinon 35mm 2:
amzn.to/2ELiCy5
🎥 My CZcams Video Kit:
Fujifilm X-T3: amzn.to/2XIXDEN
Fujinon 18-55mm 2.8-4 OIS: amzn.to/2XLuGIw
Fujinon 16mm 1.4: amzn.to/2VLk9Lp
Rode VideoMicro: amzn.to/2NQ1cEM
ANDYCINE A6 Plus 4K Monitor: amzn.to/3aIsPKg
Manfrotto Tripod + Fluid Head: amzn.to/2ENzl40
💯 My Top Camera Recommendation for Beginner Photographers:
Fujifilm X-T30 w/ 18-55mm Lens: amzn.to/2P3AqJA
Follow me on Instagram: / reggiebphoto
Check out my website: reggiebphotography.com
Disclaimers:
Some of the links above have an affiliate code - if you purchase gear with these links, I will receive a small commission at no additional cost to you. Thank you!
Should I make a full settings guide for my setup of the Fujifilm X-S10?
Yes pls.. thank U
Yes
Yes,please
Yes that would great! Thanks for these videos Reggie.
Yes please, I still need to know how the 4 custom dial work
Excellent! --Finally someone who tells us exactly how to use legacy manual lenses on a Fuji camera. Very well done. - I have the X-S10 on the way, and have a lot of excellent legacy lenses with adapters for the X mount, and am looking forward to using them on the X-S10. I also like that you go into detail on customizing the Fn buttons - especially setting the left scroll wheel to what you prefer - like ISO, which is what it will be for me too. Your review is very easy to follow and understand. Thanks for a great essential review of the Fuji X-S10.
I have been waiting for this for a very long time!
Just bought one! So thankfully for your help!
Really helpful video with several excellent suggestions. The tip on how to toggle the exposure information in the EVF with the DISP BACK button alone was worth the price of admission! Could not find this little piece of information anywhere until I discovered your video. Many thanks! :-)
This was very helpful Reggie, thank you!!
This video really helped a new user like me who was struggling with the settings. Thanks for making this video buddy!
this was very helpful! Please make the deep dive! Thanks!
Fantastic tips always appreciate you!
Yes I would like you to do a full setting guide! You perform a excellent guide of the camera it’s easy to understand you.
Awesome!
Yeah!! I agree! Full setting guide. I'm new to Fuji coming from Sony. Lol
Thanks for the great tips especially the last one about touch screen in which I can use it to choose the focus point. Wonderful.
Reggie, very helpful. Thanks for the tips! I have also found a good use for the C1-C4 buttons (landscape, tripod, sports, people) where each has its own setting for IBIS/Focus/Eye tracking/Shooting mode.
Yes! For me I wish I could set them for video functions
Very very useful info! Thank you
Very helpfull, thank you
This was super helpful Reggie, I've been on the fence about buying one of these because of familiarity with my xt2 & xt3, wishing you a success year
Awesome!
Awesome Reggie !!
this video very helpful for my xs10 !
palTwoTech , omar , Gajan , Maarten you all fuji guys are awesome
Excellent information- thank you for sharing this!
You’re welcome!
So useful, thanks!
Thank you.. nicely explained.
Your tips are amazing. So underrated video. Thanks for sharing Reggie
Share my channel with others!
Very nice!
Thank you for the details settings.
Really useful, many thank's.
You taught me a lot about my X-S10! Thank you!
Really helpful
great info!!
Very good video Reggie! And yes I would love to see a more in-depth video of how you set up your XS10 as we can get many good ideas from yours, on how to set up our camera.
Awesome! Will do
How do you only have 20k subs man, I love your videos, thank you for all you do! I'm excited, my X-S10 is coming in the mail today. So I really appreciate this video!
to be honest, i have no clue lol.
Ohhh insteresting! I didnt know about the ibis causing micro corrections on the tripod! Excellent video 👍👍
thank you so much
Yes, please. A full settings guide will be very useful
Great video! Didn’t know about Alot of these functions
Haha! Yeah after John Branch told me he didn’t know about the touch screen sensitivity adjustments, I figured I’d make this vid and try to hit them all
Excellent
Thank you!
Super helpful tips - thanks!
Which did you find most helpful?
@@Reggiebphoto Change EVF/LCD mode was huge (spent like 20 min hunting for it before watching your video), and the AF All Mode has been really helpful
News subs here, great help with my photography hobby!! ❤❤
Very good tips! I love AF All.
Yes af all is the truth
Thx!
Ps. I think you’re a great wedding photographer and look forward to seeing your channel grow 🙌 I don’t shoot weddings, but your photography insight is still relevant :)
Thanks so useful. Regards your speed what I have just done is press the enter key on my chromebook after each statement then write down exactly what you have said, then press enter again for next point etc. Occasionally had to go back but got everything written down. Took a while but will be worth the effort. Can't implement as not taking delivery of camera until tomorrow.
Bro with every video of yours that I watch, I am tempted more and more to buy into the Fuji system! I'm wanting to switch from Canon and was thinking Sony, but damn the Fuji Juice (shout out to Zach Mayfield) makes my mouth water! Great content as always Reg💯🤙🏽👌🏽
Awesome video. Yeah now XS10 settings would be great
Sounds good!
thank you sir
Thanks for this. The tip on IBIS off when on a tripod was excellent.
Awesome!
Nice Reggie ... I really like my X-S10! ... thanks ...
🙌🏽
I have it for 2 yeasrs now and this is the most advanced video I watched for the menu guide.
Thanks
Thank you very much for your advice, the provision: preview exposure on / off, did not know it, to take photos with flash
Nice
Hi reggie, could you do a video on manual settings as to what is your sweet spot setting for daylight, sunset and low light situation.thanks.
Thank you😊👍🏻
You’re welcome
Hi Reggie . Thank for video , very helpful. I just bought my xs10 with 16-80 lens . I’m new to mirror less cameras and I’m gonna have to leen few thing , my latest and only digital camera was canon 5D (mark I 😁) I have one question to you and I’ll be so thankful if you could answer. Thing is that this camera makes noticeable humming sound almost like a fan in camera . I assume it’s ibis but it’s still make that noise even is turned off! Should I worry about it or is it something normal and have to get used to it ? Thank you in advance
Thanks, Reggie. Very good stuff. Yes, please show more, and please tell me how I can get all X-S10's film sims in Adobe Camera Raw and Lightroom. It is all up to date and so is my macOS. The three new sims are missing. This is very frustrating.
Hmm I’ll look into Thst
Hi Reggie, enjoy your videos. Do you have a suggestion of setting up a dedicated button to change between AF-S, AF-C and Manual since the X-S10 does't have the focus dial on other Fuji cameras. I miss it. Thanks
I Use the af on button to change between modes
Great video! I’d add one more to help save battery life since the XS10 eats batteries like candy. Turn Bluetooth on only as needed. Or better yet, leave it off 100% or the time and then if you want to transfer images to your phone, initiate a connection using the wireless communication function (in the menu or through a function button) each time.
I personally find the Bluetooth more stable in initiating the wifi connection. Ibis is way more power draw than Bluetooth
So glad you made this for everyone 😂
Haha, well lots of beginners have the xs10, but many settings carry over to any Fujifilm camera.
Hi Reggie, I’ve recently gotten a new x-s10 and was wondering what settings you recommend to shoot sport in? This is my first Fujifilm camera and so I’m still trying to get the hang of it and your videos have been very helpful!
Check out my af settings guide.
DUDE! Awesome and fast video. Is there a way you could share your programming file that made all these changes? That would save many viewers much time. Thanks Reggie.
Will be coming with my full setup video
Tip: for IBIS I set 'swipe down' for IBIS control, 'down' meaning 'I have a tripod'.
Also worth mentioning silent shutter and flash. Presumably this works the same as for other Fuji cameras. Catches a lot of people out.
👍🏽
Thanks for this video, would you know any reason why the evf should lag on this camera, almost 10 seconds after I look thru the viewfinder, it starts lagging big time, I move away and look again it’s fine but only for 10 seconds and then it starts lagging again!
Thank you for your interesting video! I just bought this camera! Can you Can you explain to me why the flash incorporate in the camera only works in customisation -C2-C3-C4 and in the first one it doesen't work. It doesen't even work in manual program - in diaphragms priority-in time priority. Also in the first customisation I entered negative classic but clarity doesen't work! I apologise for my English...Please can you help me??!! I don't know how to resolve..! I didn't find anything in the manual. Thank you if you answerme! Roberto
Holding down back to access the function buttons = mind blown!
Hi, I'm a new user of XS10, how do you activate the last part of the Menu, the MY one, and also how do you activate the grid and the straight line in the middle?, thank you so much
In Aperture Priority Mode, is it possible to set the rear command dial to control the aperture instead of changing the EV. Thanks.
Hey Reggie, great video! Can you use the custom C-1234 dial to store video settings?
Nk you cannot
@@Reggiebphoto thanks for the response, that’s a bummer
Yup I submitted a formal suggestion/complaint to Fujifilm but they still never addressed it despite me being an official ambassador
@@Reggiebphoto Maybe they’ll change their never mind LOL. So I’m using the fringer EF to FX pro 2 adapter with all my Canon lenses. Because I sold all my Fujifilm lenses when I sold my XT3.
On the XS10 I have no function of the front dial in front of the shutter button?? Do you know if that is because I’m using it with an adapter with a control ring
Do you know why for the IS mode, there is no “off” setting for me?
Thanks for the tutorial. About the Fn dial - I am only able to change it to default (film simulations to none or +- mode. I am not presented with other options. Thoughts?
You are. There’s a whole menu
Thanks. Helpful. … another reviewer did that unlike other Fuji cameras, on the XS10, when you double click the joystick, the focus point does not return to center position. Instead it does a focus zoom function. Is there a way to customize it to make focus point return to center? I feel like this is an important functionality as it is so easy to accidentally move the focus point away from center, so it’s great to be able to quickly reset it back to center. Thanks.
the reason for this is the rear command dial on the x-s10 doesn't click. usually that's the zoom function
Hey Reggie, great content as always. I am thinking about getting an XS10 to pair with my X100V to do more video. Had an XT4 before but sold it (regrets now). However, I have chance to buy an XS10 at a cheap price. Can the C buttons be programmed to save video settings modes like on Sony?
No they cannot
@@Reggiebphoto Cheers Reggie. That seems an overlook on Fuji's part. Oh well. Hope you have a great day.
I was this close to throwing my XS10 against the wall out of frustration. You saved her life with this 10 minute video.
You are God!
Which tip saved your xs10 from wall impact lol
@@Reggiebphoto The bloody FN button and its settings. It was a jodienda trying to figure it out on my own since I misplaced the manual. I'm more of a visual learner. Visual and auditory.
Thanks again for the video and sparing Jane's life (I named it after the celebrity photographer Jane Bown). Check Bown out when you have a minute if you're not familiar with her work and the one setting she used to shoot her magnificent portraits.
Google xs10 manual online and save a pdf to your phone. You can use the search function on the pdf reader to find anything you need
First, thanks for the videos. Very helpful. Second, I own an XT3 and an XE3. I’m getting a lil older (and shakier lol), do you think the XS10 would be a nice addition with its IBIS? Thanks! 👍🏻
Just for ibis Im not sure if that’s reason alone
@@Reggiebphoto Thanks! I think I’ll hold off for now.
I was thinking of buying the X-S10 so that is helpful thanks. I was wondering if the AF Modes are the same in photo and video mode, I think they seem to be according to the PDF manual but just wanted to confirm that.
They are slightly different
@@Reggiebphoto Thanks :-)
I see a blue metallic sparkly vertical line sometime in my EVF. Anyone know what that could be? It seems to move or go away if the shutter speed changes or during autofocus
This is great to watch, coming from an XT4 setup. Putting the ISO function on the left dial solves main issues w this camera. But does it still only have 4 custom setting options?
Yes just 4
@@Reggiebphoto thanks for confirming. That’ll take some getting used to.
Hi Dear,
I Just Bought my Xs10, I also bought a samonic transmeter mic..
how to adjust the mic to make it soft..
Thank You
+Rey Millada Tv you would have to adjust the gain levels in the camera
Please make a deep dive of how you set up the X-S10.
YES!!!
Yes will do!
@@Reggiebphoto is there an option to make ISO control with front or back dial?
No. I’ve asked Fujifilm to address this but no response yet
Hello, thank you for the video. How can i have this green line on the screen ? Thank you
Electronic level
also: in camera film simulation vs software simulation. if shooting raw with the intention to edit in post, is there even a point in shooting with in camera film simulations when theres software presets? is there difference in quality?
czcams.com/video/lkx8peaW48g/video.html there’s a slight difference. But here’s a method
Where is or how to set up itw Exposure Compensation button/dial? Thank u. 0
great video. is there a way to use front dial function for controlling iso. And how it's possible to register a custom setting to one of the C functions. Like setting specific ISO / Shutter Speed / Aperture to C1 etc.
First question, no it’s not possible. Second question yes you can. You can program specific exposure settings
@@Reggiebphoto Thanks. Is there a tutorial link where i can understand this better
Not at the moment
@@Reggiebphoto i found one that makes it easy to understand. Here's the link czcams.com/video/fipyaMmIVEY/video.html
The custom settings behave differently on the xs10
Reggie, what am i missing with changing the function dial? When i try to change it, there are no options other than default (which is film simulations)???
Change it in the fn settings
16- 80 4.0 how deep blure back grounda settings iso shettr apc explan... sir
I was able to add Preview Exposure to MY MENU on my X-T4 for easy access to this frequently used setting as I go from Flash to no flash shots. I can't seem find a way to add it to MY MENU or the Q MENU on the X-S10. Any suggestions?
You can add it to my menu. Not q menu
Hi, How to turn On/Off the Green horizontal line at 1:43?
I am unable to change the left top dial to ISO or any other setting. The only options I get are Default, Default (+_ when set to M) and _None. Very frustrating Please help
I don't have a camera yet, why am I watching this 😂
maybe because I just love to see that camera 👀
thank you for sharing this !
Haha, all important settings to know for any Fujifilm owner. What camera do you shoot with now?
@@Reggiebphoto I only use my smartphone, currently saving up to get a Fujifilm camera in the future ! I love watching your videos ❤
Awesome! Great choice!
Hi Reggie, i don’t know why but i can’t decrease the iso below 640... i guess there should be some parameter to change ? Do you know which one?
If you’re in flog or dr400 it will make you stay in iso640 or above
Hi, how to switch between manual focus and auto focus on X-S10 given that button is not there in this model?
Assign a fn button for it
hey Reggie! can the front dial be costemised to control anything at all? or is it dead? id love it to control the SS on my xs10 but i cant find a way to do it... thanks!
It cant. It’s my biggest annoyance with the camera
@@Reggiebphoto super annoying!
Can you please tell me in fuji XS 10 is it possible to display the image via HDMI and to the camera screen at the same time?
Yes
I wish this cam had filters other than the film ones.
My new X-S10 is arriving today from Japan. Hope to get some good screen shots from this cam ...
-
what do you mean?
@@Reggiebphoto i miss fish eye filter on my old xt100 ... this new cam has some good ones, however... do you have any recs for updating firmware... picture resolution .... ? ?
Can the front wheel be set to Aperture and shutter if I'm using a lens with no aperture ring?
Yes
since there is no marked-up mechanical dial for exposure compensation, is there a way to reset the Exposure compensation to zero after a shot?
I would like to know this as well
Hey Mr. I bought this camera, and hoped that the unmarked dials are remappable, however I can't find any option to switch the front and back dial (F and shutter). Using a native lens, the F ring is on the lens, so at the moment, the front dial is completely useless, does not change any setting, and I can't find out how to resolve it. Can you help me, or at least confirm, that the two right dials are not remappable or interchangable.
They are not
Unrelated comment but my i think my aelock is not working. Aflock works as i can see the small aflock graphic when i press it.
Thanks for the settings video for X-S10! I saw the electronic level working inside which looks to be your EVF, how did you do that? Mine shows when looking at the LCD, but not the viewfinder - even though the setting is checked and I'm using the latest firmware update??
Turn it on on display custom settings
Thanks for the Superfast reply. It's on still no go...Wrench > Screen Setup >Page 3 Disp Custom Setting > Electronic Level Checked. No Show in EVF Still -Possible Bug? Thanks for your help, appreciate it.
Press disp/back while looking Thru the evf
Double tapped Display Back while looking thru the EVF, both Electronic Level and screen grid appeared in EVF. Thank You So Much!. Problem Solved!
Yeah funny thing is this tip was one of the tips listed in the video haha
Reggie... I'm really undecided between this or xt3... I will be using it 40% youtube / 20% portrait / 40% landscape ... what do you think ?
Check out this video: czcams.com/video/hEhV-1_kM2Q/video.html i have a section on the xs10 vs xt3
I made a video on this too big man
The flippy screen I think is a must if you are doing youtube video filming yourself.
It actually isn’t a must depending on the type of shooting. For all my CZcams talking head videos I use no flip screen and use my xt3. The xs10’is a fairly new addition. I’ve been getting by fine without it for quite a while
@@Reggiebphoto True that. It is all about getting used to your gears. It is definitely a convenience especially when the guy have a choice of buying his next camera.
Hi, thanks for the great video. There is something I can't figure out with my X-S10: when the dial is in one of the 4 Custom Modes, and the shooting mode is P, the front wheel still controls the Shutter Speed. Why is that? (on the contrary, when the dial is in P, there the Shutter Speed is automatic, so I would expect it to be the same even in C1-C4 with P as shooting mode)
I’m not sure how to fix that
@@Reggiebphoto I actually found out what is the setting that triggers it: when in P shooting mode, if the DR is set to Auto, the only setting I can change is the ISO. When DR is not set in Auto (i.e. 100%, 200% or 400%), the front dial regulates the Shutter Speed. In this case the P program is sort of an S program, isn’t it? Why is that?
I’m not sure.
@@ptgood This is called "Program Shift". When in this mode you can change Fstop value with the front dial and shutter speed will change with it to compensate and hold the exposure you have currently set by the exposure compensation dial (back dial).
The upper left dial (Fn-D) can't be change besides two other settings (default/default (exposure set to M). How did you manage to change it with more options?
I just changed it after setting camera to m
Bro, you got to scroll up... All the settings will be there.
@@averagegachaenjoyer I just made the same silly mistake lol, thanks!
I had that same problem, but then I scrolled with the left-hand dial and it worked. Weird.
Hi Reggie, just got my X-S10 and put some film recipe/simulation on my C1 and C2. When I shoot on those settings, there's always a "Storing" and loading after I shoot a photo. It doesn't happen when I'm on M settings. How I stop that? Is there a setting for that? Thank you so much!
turn off the clarity setting.
@@Reggiebphoto thank you so much!
Did it fix it?
@@Reggiebphoto yes! Thank you. But why is it like that? I mean, is it an issue on XS10 or all the new Xtrans sensors?
It’s not an issue. Clarity just takes processor time to apply the effect.
Hi, I have a question... When you show how to change upper dial to ISO controll I dont have that option. I have only 2 options there and also I have latest camera updete? What am I doing wrong?
i'm not sure. it's included in the default firmward that comes iwth the camera. it's not a new thing
This bugged me for some time - the answer is to get to the stage where you can see the default option and then rotate the Fn dial - this will allow you to scroll through the options.
@@cosmicstring2001 thank you so much I was going crazy with this ^^'
@@cosmicstring2001 THANK YOU!!!!!!!!!