RC8B4.1 Nitro Buggy || Full Review w/ Protek Samurai RM.1 Engine
Vložit
- čas přidán 1. 06. 2024
- Nitro Buggy: alnk.to/ge5PHkN
Engine: alnk.to/b7xRfEN
Pipe/ Header: alnk.to/clXa7or
Clutch: alnk.to/4fQiZS8
Servos: alnk.to/fSgjJKp
Wing: alnk.to/bPcTaXp
Front Spring: alnk.to/7M9sCcE
Rear Spring: alnk.to/9IdNpbt
Receiver Battery: alnk.to/aLIli6q
Lee's Setup: drive.google.com/file/d/1JXob...
======================================
Current Cars
My 2wd buggy: bit.ly/3u9bfyi
My 4wd buggy: bit.ly/48Of0In
My 1/8 EBuggy: alnk.to/6bUDMU9
My 1/8 Nitro Buggy: alnk.to/ge5PHkN
======================================
What’s On My Cars
Best 1/10 Tires: bit.ly/485aUL7
Best ⅛ Tires: bit.ly/47RlIMH
Fast 13.5 Motor: r1wurks.com/collections/v21-h...
Fast 17.5 Motor: r1wurks.com/collections/v21-h...
Motor Fan: bit.ly/3uhc345
Nitro Engine: bit.ly/3uhuCVM
My Battery 2s: r1wurks.com/collections/2s-sh...
My Battery 4s: bit.ly/4bae2Yy
My Radio: bit.ly/3SwJARj
My 1/8 Servo: bit.ly/48K3opZ
My 1/10 Servo: bit.ly/4bms2yK
My ESC: r1wurks.com/collections/elect...
ESC WiFi Module: r1wurks.com/collections/elect...
Bodies: bit.ly/3SgKXSy
======================================
Pit Space Stuff
Super Powerful Charger: bit.ly/47OMJA7
Parts Box: amzn.to/2OkQqGF
======================================
Tools
Fav Allen Wrench Set: bit.ly/3Sb9MPT
======================================
Shop
Fav RC Store: bit.ly/494O2fu
======================================
Video Equipment I use:
Main Camera: amzn.to/3aV5fNg
Main Lens: amzn.to/3sytgzM
Zoom Lens: amzn.to/37NuGhx
Macro Lens: amzn.to/3qXDUQ8
Main Mic: amzn.to/3krcuQ5
Vlog Mic: amzn.to/3bMhXNm
=====================================
Social Media Links:
Instagram: ryan_stiles bit.ly/2nZxPUO
Facebook: Ryan Stiles Harris bit.ly/2GdbVUB
Patreon: bit.ly/3pVGhkZ
=====================================
#rc #rccars #rcracing
i don't have any desire or even ability (at least in WA) to run a nitro car but i wouldn't miss a Ryan Harris upload! loved the commentary and track footage. my wife was laughing at how crazy these cars sound on track
Your cars are all beautifully presented and videos are fantastic....the little stop/starts with the editing,music and content make them easy to watch.
Thanks Ryan!!
Glad you like them!
We have found alot of stability in the UK by sweeping the top arms out on the shock tower. Rear pills are always middle and in and the front pills on the tower are down and out for more steering and active caster, if you run them UP and OUT you will have slightly less steering but the castor will stay the same through the compression and rebound stroke, this also adds more rear end stability. Not sure if youve tried that yet, but worth a mention. Love your videos BTW
Thanks for the info!
Yes B4.1 . A lovely car that dominated for yrs and it took a change in track design and surface prep to usher in a change to mids. Miss that car. -U10
Best engine on the market in my opinion wish I could afford one.. Sick edit as usual 💯
Love you're doing open chassis brands this year Ryan. Great to hear feedback on different brands. Another great video, super insightful on the different tech. Thank you and please keep them coming!
Mayako next?
more nitro content! happy yo see you doing it here, always loved you content, you make such an awsome videos. keep doing it, cheers from brazil =)
Awesome stuff Ryan! Hey way to go to Jett Lawrence huh?! I love that family! Nitro's the glory! Cheers bro!
Nice work Ryan 💯
Happy to see some Nitro content from you
- Thanks for sharing the Adventure with us 🩷
i like the side profile of the body as the roof line is somewhat WV bugg.
That's an Amazing Track. I wish there was something like it locally.
I finally got into an Associated buggy after years of thinking I should And I'm glad I did. I liked it so much I picked up the 40th anniversary kit I wanted years ago.
I really like the way your setup lands. I used to run Nitro but LiPo batteries spoiled me.
Amazing video, i love 8th scale content from youu 🔥🔥
Great horsepower and electronics combo! I’m running the exact same equipment and love it. I can see the RM.1 being a very popular choice at the track.
OHH AWESOME!!! Been watching your videos for many years now and I just moved to Florida and this track is like 15 minutes from me!!! Been wanting to get back into nitro and get into racing. In the past all I did was bash and that was all with electric cars. Have an Arrma Typhon that I converted to 4S but definitely want to get into nitro again. Last nitro I had was way back in 94. Anywho, hope to see ya at the track some day!!! Have a good one!!!
Awesome! Thank you!
That's cool seeing you try different brands Ryan!
I went from the Tekno NB48 to the RC8B4.1. I could not for the life of me drive the Tekno as well as many others did on the track. After some setup help with the RC8B4.1, she was on rails. I'm running the REDS 721 engine with the 34mm Tetra V3 4-shoe clutch and REDS X-One pipe. I'm in love with this TA buggy. I just need more time with it. You have the best RC content on CZcams. It is so sweet to see you running the RC8B4.1. Maybe you can send me your driving skills on an SD card that can load into my radio? lol
_Really enjoyed this one.. great stuff!_
Great Video, oh how I miss firing up a nitro buggy and hearing 11 more singing a tune around the track!
I would highly suggest the Tekno TKR9343B filter assembly, it softens the bottom end a tiny bit,but also increases the mileage by about a minute
Great vid Ryan.. Enjoyed that a lot mate.. Thanks for sharing your set up experiences..
On my RM I use the Samurai 7mm restrictor. On a new engine, you typically have it richen up as you get to 1/2 and 1 gallon marks and you will start to go rich and die.
Bingo , 7mm is the way to go
i wish i had the composure to do after race talk like you do but my brain goes about 14x faster than my mouth, xD great video, gotta get my camera back out to the track
Great video! Love the content. Your other rc cars are TLR. Why Associated and not TLR? Just curious.
Congrats. Looks awesome!
That's a very nice buggy Ryan. Good job!
Nice review and great track footage. Thanks for sharing
Was in Florida last week on vacation checked out beach line rc wish the oval was open but got to see a really nice facility either way and oh yeah way to warm lol 😂
Man nitro racing looks so fun
Great job, really like your 1/8 vids
Amazing video ! Very interesting to watch from Europe how club racing is done in America, looks like loads of fun, good tracks and friendly environment.
The thing with the tune you like is adjustable with the mixture controle needle 🙋♂️
Nitro content ! Keep it coming Ryan !
Love the nitro content
Cool video bro that thing is sick
Would you ever have any interest in doing some tekno videos? Maybe the et 410, 1/10 4x4 truggy class.
Thank you so much for all of the content and everything you do for the hobby.
Great video
Just thought I would drop a Go"Pro" hack for summer time. To fix the overheating issue you have to set it to 30fps. Normally I would run 4k60 when cool outside and 5k30 when hot. It will run the SD card out before it stops. All 60fps settingswill overheat the gopro. 👍
Thank you great video only decided, this weekend to get nitro 1/8 buggy my 1rst nitro , being in hobby for 25 years racing playing wuth 1/10 buggy s
AE is so clean
Very nice video. It would have been better if it were a Losi like your 1/10 cars lol. I also have gone to the darkside with my oval cars running a b6.4 street stock
the hb car requires a lot of those gatekept secrets to make it comfortable to drive
I like my B4, but if I’m able I’ll be grabbing some Sworkz kits for next year
If I don't remember wrong so Jukka Steenari was the designer of that clutch in the -90es.. Em i wrong or do I remember right.
Would messing with the clutch shoes make the lower end of the power band change for os engines? There are a lot of moving parts in nitro compared to electric. Just starting to run nitro and sportman nitro content would be helpful. Making the nitro experience not as hard at first is helpful. Nitro is a journey compared to electric.
Ryan tamiya tblm 02s 17.5t motor or yokomo zero 3 17.5t motor on dirt with moderate jumps? Those are my choices, can't solder yet
So does this mean you aren't a TLR guy anymore Ryan??
👍🏾💯
Will you be releasing and video about those HB cars you used?
maybe try the htc diffs in front and back from the .4
Hey Ryan, what brand fuel and ratio do you use?
How come nitro engine in those rc scale do not use the all aluminium/nikasil cylinder method ? Like motocross ?
Was part of the reason for the switch from Losi the fact that's it's impossible to find parts? Kinda curious what the reason was.
back to ae goodstuff
🙂👍👍👍
Hey Ryan could you do a review on the team associated rc10sc6.4 and turn it into a dirt oval sc mod
b4.1e next?
Is Protek Amain's in-house brand?
It is.
where is the link on the springs
Hey ryan whats the name of that song at 2:10?
EXPENSIVE
You have to find springs that will work?? Wtf
Im not responsible enough for a nitro lol
I thought he was a TLR boi?
Dont get a tlr 8 scale lol
Ya u only need $2000 , such a rip off , why are people ok with the prices of rc , we get screwed
gotta pay to play. these things are expensive to make, can only be so cheap. it costs money to be competitive too
@johnnyh.3328 I know I've been racing for years , it's the biggest money pit
@@midwestboss8808 I get where you're coming from and it's all relative. But mannnnnn, look into other types of racing. Even karting.
Such a fragile car don't give up the TLR buggy!!
I don't understand why people run associated. All I ever see on fb pages are broken cars, missing parts from kits, lack of quality (counter sunk parts not being counter sunk) let alone they immediately halt production on parts for a car once the new kit comes out 6months after the last.
TEKNO IS THE WAY TO GO