Video není dostupné.
Omlouváme se.
Tuning a M50 turbo on MS41
Vložit
- čas přidán 31. 03. 2021
- Car was a little tricky. Its a m50 with a front mounted crank sensor running OBD2 ms41.
Hint: Don't bother using MS41.1 FW, it will pickup false misfires and have you chasing your tail! Upgrade to MS41.2!
Ran across your channel after the Volvo video got posted to Reddit. You are a certified wizard. I’d bring a car to you and I’m on the west coast if I ever needed something like this done
I got 302hp/6200rpm and 400nm/4600rpm with 7psi boost from m52b25, ms41.2 and my own street tune. We just measured low boost because I needed that dyno sheet to get the car road legal 😃
Stock maf?
Seeing all these 36 tuning videos just makes me super jealous haha
This could be you if you want your finances ruined
You think the tuner was getting a false lamba reading? The sensor seems really far down the exhaust
Ms41 ecu with PMAS HPX MAF
Where you located, I'm ready to turbo my 98' M3.
Where are you located need my 328 turbo tuned
Dude ill pay you to help me tune my m52 with similar setup
Can I get away with running stock head gasket and bolts on m50b25tu with 8 psi?
Absolutely I wouldn’t hesitate
@@spankranchgarage thanks for the quick reply. I appreciate it. It's cool you have a Dyno.
Can you put ms41.2 firmware on the ms41.0? Also running front mount crank sensor on a euro engine
I don’t know for sure. Take a look around the web I know that’s been asked many times. I don’t want to mislead you
Yes, it can be done on ms41
It s a drift car
What's the part number on that wideband.
These are the sensors I have the most luck with. 17212 amzn.to/3RcxWZB
@@spankranchgarage thank you
Where r u located ?
How to contact you
this is m52
It’s a m50 block/rotating assembly. No crank sensor hole
@@spankranchgarage Could You send me rom from this ms41?
Brooo im rebuild his my m52 and im going to need your help! Do you you have an Instagram?
How do you run ms41 on m50?
With a standard front mount crank sensor and MS41.2 firmware it works well
MAF placed before turbo inlet?
After. Blow through configuration
@@spankranchgarage thank you!
Hi, I m trying to finish my first m50b25 build, with Turbo GARRETT GT3076R, forged pistons/rods, 440 cc/min Deatschwerks injectors, Turbosmart external wastegate, FPR, ATHENA hg etc... but my tune is a shit. Can you send me your email so we agree on a remote tuning paid service pleasssse ?
still need tuned?