Power Window Kit | 1965-1968 Mustang
Vložit
- čas přidán 7. 10. 2013
- Product Link: www.cjponyparts.com/power-wind...
In this video, Bill & the crew at CJ's will show you how to install this Power Window Kit with Crank Handle Switches on your 1967 Coupe or Convertible Mustang from the comfort of your own shop or garage!
With one of these power window kits, you can transform your windows yet maintain the factory look and feel!
The kits come with everything you need to convert to a custom power window setup, including new power regulators, AC Delco motors, power crank handle switches for original window cranks, a complete and labeled wiring harness, as well as conduit to protect the wires traveling through the doors.
With Bill's instructions, you can now install this window kit yourself! The new power window regulators are designed to bolt directly into the original mounting holes with little to no modifications and will use the original glass channels. The original window cranks mount directly on to the new power crank handle switches the same way they would mount on to the factory manual window regulators.
Make sure you follow the steps in our installation video closely, and expect the project to take up to three hours.
Check out more Mustang Restomod Interior parts from CJ's here:
www.cjponyparts.com/mustang-re...
Subscribe to CJ Pony Parts on CZcams here:
czcams.com/users/subscription_c... - Auta a dopravní prostředky
These guys make it easy to want to spend money on my car when it isn’t even running yet
i would never try this if it wasnt for this video, thanks!
CoolRaul did you do it?
Nice upgrade for sure.
That is bad ass. Great idea
I'm happy I have a fastback, no playing with back seat/ interior panel parts. :)
Wow you made it look easy! well as easy as it can be. i have a fastback so its only half as hard
2/3ds you mean ;-)
To be honest, getting the vent window EXACTLY right is 50% of the chore since it lines everything else up. I have replaced regulators in two body-styles (coupe and FB) I am now working on a convertible. That is easily the hardest since there's no roof to line up with, or rather the roof needs to be adjusted WITH the glass to get it right...sigh.
Do you have a kit to create some factory looking buttons to control all the windows from driver side
Nice vid! I think the power quarter windows might be overkill, but do know of a way to have control of the passenger side window from the driver side?
My kit didn't come with the rubber door loom for the wiring. Where can this be purchased? (Can't seem to find them individually)
I have a 1971 Torino wondering if this kit would work? Or if you provide one.
I need this kit for a 1988 Monte Carlo SS G/body. Do you know who carries it?
Hello
I enjoyed video the only guestion I'm putting in a complete intieror it's a deluxe pony
I would rather have the switch,the toggle type that the factory' put in to operate the window
Just don't like the old handle look is there a upgrade Thanks Bob
will this window kit fit a 1971 maverick ?
After you have the motor installed and you wanted to check to make sure it worked before wiring it, what wires did you connect to run a test? Thanks for any help.
Do they make this kit for a 67 ford galaxie?
would this work in a 73 k10
so i love that system using the original cranks as the switch, but i very seriously dough they make it for my car, is the switch available as a stand alone piece
They are made by Nu Relic and they do offer the switch alone and they are splined for certain handles.
So in my 66 Coupe I'm having a hard time finding the first screw that you pointed out around 2:59. Any tips?
I hope u found the solution
Would this work the same for a mercury cougar?
They make kits for all 65-73 mustangs. If you just want the front windows you can order the fastback kit and it will just come with the two fronts. I have seen someone use this kit with a toggle switch. If the switch is up the drivers side crank works the drivers side window, flip the switch and it works the passenger. I have not done this but ti is possible.
Really good video! Just some questions: how did you connect the cables on the passenger side and both of the quarter windows and where did you connect the green cable from the relay? And by the looks of it, you don't connect the orange cable at all if i'm right?
all the power leads were ran together and connected to the relay under the dash. The green is switched, we used a wire we had run to the radio and no you do not need the orange wire.
Bill Tumas Thanks a lot! One day, I'll have my own mustang and most certainly install this upgrade! Keep making good videos!
btw, can you make a video on how to install A/C if possible?
Alex Crystos That is something we have considered and may do in the future
Nice, hope you'll demonstrate it ! :)
Do you need to use a relay per side or will one relay work for both on a fastback?
Cheryl Clemmer One will be fine for both windows
Can the driver control all 4 windows?
how can you do this on a ford f250 crew cab on all four windows??? do they sell kits for these trucks too or these can kits could be use on these trucks too??
These kits aren't going to work on an F250.
how do I allow my seat bar to go back farther with out changing my factory 1965 pony seat?..plzzz help C.J..cjw...thks.
+Cedric Williams Unfortunately there is no easy way to do this. The seats bolt through the seat platform so the best way to move the seat back is to cut the welds and move the entire platform back which is not an easy process.
My 67 fastback mustang has the speakers in the doors. Will the speakers get in the way of the window motor?
I haven't installed one yet in a car with factory door speakers. The motor sits back and the speaker is rather shallow so I think it would work but I have never tried.
I just want to know kind of grease you used on those window channels?
Osvaldo Garcia I use synthetic grease from Napa.
What is the name this color ? Looks great
Can you please tell me how to install beauty marks on the quarter panels on side please help me
Is a 65 convertible Mustang Pistons in being away and you help me please
Will a Crown Vic front suspension fit on a 64 Mustang Coupe will you please get back to me
I have never heard of anyone doing that swap, the CV stuff is usually used on classic trucks.
@C.J..re..cjw..seat bar..1965 pony...Long Leg's...plzzz?
Do they make this kit for an 83 Mustang?
They offer universal kits but nothing specific to that year.
hey do you have them for a 65-66
Cut out part of the inner quarter panel? Ouch, butchering the car, no thanks. Also, if you can't operate all the windows from one location, not really much improvement over hand cranks.
Hi Al, Autoworks Parts offers a true bolt-in power window solution for 64-70 Mustangs, as well as an assortment of switches that you can configure however you'd like.
1220 dollars good lord
Why??? They didn't even come with them when they were new. How dumb.