COMPLETE PAINT JOB with the SPRAYIT R500 LVLP spray gun and a small compressor
Vložit
- čas přidán 5. 05. 2021
- In today’s video I do a complete paint job using the SprayIT R500 low volume low pressure gravity feed spray gun and my small 21 gallon compressor on a 2012 Chevy Tahoe and show you that it is very possible to paint your vehicle using a LVLP spray gun and a small compressor at home in your garage.
SprayIT SP-33000 LVLP spray gun kit: amzn.to/3N0DofT
R500 lvlp spray gun: amzn.to/3MMNLnN - Auta a dopravní prostředky
Thanks for showing me that I don't need to invest $800.00 in a compressor to spray a car. I now have the confidence to paint my Civic!
You’re welcome and I appreciate you for checking out the video!
shit old civic can paint brush and have better than new civic. no matter how paint have only big shit civic.
@@UndergroundPaintKing
Hey brother where did you get that color mixed up at and how much??
@@ibanezsrbass1759 I got it mixed at my local paint supplier but I don’t remember how much I paid for it
@@UndergroundPaintKing
Ok thank you bro!
The algorithm sent me this gem of a channel. No bullshit, straight to the point, not some sponsored infomercial shill
I’m definitely not sponsored I just do this for the people really trying to gain some skills…I really appreciate you checking out the channel and liking the content!
Dude had me with the intro; lol.
I love the ingenuity that went behind making this work with a small compressor. The results are outstanding!
Thank you and I appreciate you checking out the video and hope it helps if you intend on doing this for a project of yours!
Great demonstration and results! Thanks again for the review on the Spectrum Paint System. Picked up a "starter" set and both adapters and am pleased with both value and quality level. Keep up the great work!!!
I’m glad the videos are of some help and are pleased with the paint system and adapters…I appreciate you checking out the videos
That is an awesome and outstanding job that you did. I also enjoyed the instructorship. Salute my dawg 💪🏾💯
Thanks I appreciate you checking out the video 💯
Man that looks so good. And yes I love my SprayItt 33000 on my 33gal Craftsman 💪🏽💯
Great to hear success stories on the SprayIT spray gun…I appreciate you and thanks for checking out the video!
That's what I'm talking about most of us that watch these videos don't have expensive equipment we do it for the love of it
And that my friend is why I make these videos for the people that love to do it and don’t have the shop setting that makes things easier…I want to show people that it still can be done and done nicely!…I appreciate you taking time to check out the video!
Fantastic video man! I've always wondered about this but didn't know enough. Thank you for proving that it can be done!!
You’re welcome and now at least you know it can be done so I hope this helps or motivates you to do your own project!…I appreciate you checking out the video!
So good, and thanks for taking on a real challenge for that setup with that big truck. I've got a similar size compressor with plans to paint a '91 Land Cruiser. Was looking at 4-stage HVLP turbines but with careful planning this is totally doable at about 1/10 the cost! Thank you!
You’re welcome and you can definitely do it without having to spend 1000s on equipment…I appreciate you checking out the video!
Hands down the best videos I’ve seen in a hot minute
Thanks I appreciate that and appreciate you checking out the videos!
Just the kind of real world review I was looking for, that Tahoe looks amazing!
Thanks John I appreciate you checking out the video!
Excellent job UPK, You have to be happy with the way that job turned out. As always keep up the good work and looking forward to the next video. Thanks again
I am definitely happy with this job and I appreciate you checking out the video and supporting the channel!
Thank you for putting this out, i couldnt find anything anywhere that told me i didnt have to invest thousands into tools for what is likely a 1 time project. Great content man.
Thanks I appreciate you checking out the video and I hope the video is helpful!
Looks great! Just shows what you can do with a little planning, the right equipment and a lot of talent! For a while Harbor Freight sold automatic air tank drains that would cycle every time the pump cycled on and off but cracking the valve on the bottom is a great tip and simple solution.
Thank you sir I appreciate you watching the video!
Awesome seriously awesome. This should give some DIY people hope! Thanks so much for doing this and putting it up!
Thank you and it was my pleasure to give my DIY people hope! You can definitely do it!
Thank you so much for this. I'm just a home guy and didn't want to commit to a overspending on a compressor to paint a car. You earned my sub. Can't wait to see more.
You’re welcome and I appreciate you for subscribing to the channel!…I’m doing my best to show people that you can accomplish nice work without the big shop setup and the expensive tools
That grey looks awesome on her! Beautiful job, and excellent job at showing that we don't need high end equipment for DIY projects!
Thanks I appreciate you checking out the video and you’re right that you can get those projects done and don’t have to have big shop equipment to do it
I love the spirit of entrepreneurship exhibited on your channel, straight-forward information with no chaser. I love detailing but appreciate the painting process as well. All the success in the universe is what I desire for your and your audience here on youtube!!!!
Thanks I greatly appreciate that and appreciate you…All the success to you as well my friend!!!
Nice job, it's because people like you I'll be painting my truck soon... Thank you so much.
Thank you and you’re welcome…I’m glad to hear that you’re going to be doing your truck soon and I hope it turns out just how you want it bro!
I'm getting ready to paint a '97 honda crv with a similar setup because of this video. Props to you UGK! I'm not a painter but have a overall idea of how it needs to look. Thanks for the video!
You’re welcome and I hope it turns out nice for you!
I gotta say, UPK is inspirational. I do small stuff, mostly guitars and bicycles and I’m trying to move on from rattle cans, but get scared away when I hear about needing to get 5 HP, 3 phase, 60 gallon compressor. Seeing UPK paint up a monster Chevy Tahoe with a 21 gallon compressor and a LVLP gun is mighty impressive.
I appreciate you Sean and you definitely can do it and not need all the big equipment to pull it off…I hope the channel is helpful to you!
UPK in the building........Damn son you put that myth to bed. Awesome job it came out really nice. Thanks for showing us it can be done.
Yessir! #MythBuster…I appreciate you checking out the video!
I have done the same with my 3M Accuspray and twinning 2 5 gallon contractor compressors together. You did great on your video and paint job!
Thanks I appreciate you and it’s always good to hear about people having success with small setups!
I just received my sprayit 33000 can’t wait to try it out with the exact compressor, thanks UPK.
Good to hear Victor, let me know what you think about it!
Bruh!! You're my new hero. As soon as my buddy puts the exhaust on my racecar I'll be using the same setup. I will be telling everyone about your channel. Thanks again bruh.
Appreciate you bro and you’re welcome…I do this for my people!!!
Damn bruh, I'm glad I found your channel. I've learned more watching you and sprayway customs in the past month, than all the big shots channels in years. My hat's off to you brother, I wish you all the success in the world.
I love this video more
Thank you I appreciate that
Thanks bro I’m glad that I could be of any assistance in the work that you are doing and I appreciate you checking out the videos!
This is THE most accurate comment for real. I feel exactly the same
SprayWray is awesome and so is UPK. Pharraway is great too. Also check out True Gritt. Not really a 'how to' channel, but he does some crazy pearl combinations that are great inspiration.
Hey King I thank you so much for the outstanding and Great videos!!! I just bought the Spectrum HTE and now I will order this paint gun as well to paint my 07 Chevy Tahoe!!! Please keep up the great work and GOD BLESS YOU brother!!!
Thanks I really appreciate you for this comment it really helps to keep going and creating more content and I hope that the videos are helpful…God Bless You!!!
Enough talk, UPK you sold me with this great video! A lot of us appreciate your, info, hard work and dedication to this craft...
Thanks Ziggy that means a lot to me and I appreciate you checking out the videos!
Just getting into spraying and I have a small compressor. Thank you for the time sir
You’re welcome and I appreciate you checking out the video
Looks great. A big part of it is how smooth and consistent you are with your spray speed. Great job
Thanks I appreciate that and appreciate you checking out the video!
Exactly my thoughts he gots a consistent stroke ... That's a big part of spraying
Excellent video! It was just what I was looking for. I've been looking into lvlp guns for a while but I wasn't able to find any information about painting an entire car. It looks like the paint laid down perfectly with no orange peel. You did some excellent work Sir.
Thanks Jamie I appreciate you checking out the video and you will be happy with a lvlp spray gun if you get yourself one!
Awsome video, I have a 21 gal compressor and was going to buy a new 30 gal to paint my '77 truck. great job, the Tahoe looked fantastic. Thanks for posting.
Thanks I appreciate you and glad to hear you plan on putting in the work yourself!!!
Nice job as usual UPK - have a good weekend.
Thanks Jerry I appreciate you as always and enjoy your weekend as well!
WOW...Proof it can be done with no BS. Love your approach to this. I bought the gun and am practicing panels first. Now I know if it doesn't work, it's me. Thank you.
You’re welcome and it’ll definitely work for you !
Thanks for doing a full car with this set up. It looks great!
You’re welcome and I appreciate you checking out the video!
Came out like a champ! The tricks worked! Good job.
Thanks bro I appreciate you checking out the video!
I do spray wraps and people have been telling me for YEARS, you cant do a car with LVLP. Im up in NYC, we dont have room for large compressors. I am glad someone did a video showing it can be done. Shout out to the king
Appreciate you Kraiden and I’m glad the channel was helpful! You definitely can do your vehicles with a small compressor setup 💯
Have you done wraps with lvlp? I’m curious if it can be done. Specifically Raail spherical or auto flex?
And that is how you do that, excilent job UPK
Thanks Pharraway I appreciate you checking out the video bro!
Giving credit where it's do. The person makes a difference too. Like video don't let no one tell you you can't . lovin it
Yes sir !…I appreciate you checking out the video
Nice job 🤠
In México we use that gun, it works so good and its a very usefull tool.
Thank you and it’s great to hear others having success with it💪🏾💯👍🏾 I appreciate you checking out the video
Love the drain tip, Tahoe looks great, thumbs up👍!
Thanks I appreciate you checking out the video and glad you liked the tip💯🤛🏾
@@UndergroundPaintKing is the drain partially open while spraying?
@@luisdiaz9142 yes it is,you just want it open enough to drain the water while spraying but not allowing to drain all your air from the tank
@@UndergroundPaintKingThanks for the reply!!
@@luisdiaz9142 you’re welcome!
So far your the only one who explains everything very well. And yr not in a hurry to explain. You have definitely encouraged me to start painting, I’m just a beginner, thanks for taking yr time to make these videos…God Bless you !
I’m glad to hear the videos were encouraging to you and I know you’ll do great Israel!
You have no idea how much money and time you saved me. I was about to go out and buy a 60 gallon to paint my car but not anymore! Many thanks!
You’re welcome and I’m glad I could help in any way…I appreciate you checking out the video!
Knock that boy on out, didn't you King 👑 👍🏾🔥🔥👍🏾
Yessir! I appreciate you checking out the video Sprayway!
Played it down with ease, I'm ready to gone use mine now lol got me hyped
And sprayway in tuned in. Yea lemme catch up on some of these vlogs.
@@412AutoCare i said the same shit
Tko
Looks good I like the red emblems
Yeah the little touches with the emblems and letters helped bring the paint job together…I appreciate you checking out the video!
Great video I bought a 3300 come with 3 different spray tips primer sealer base coat and clear coat doing a vw bug you took all the doubts away
Great color! YOU ROCK
Thanks I appreciate you checking out the video…I need to get that kit so I can have the other tips as well and I’m glad the video helped in any way possible!
Maaan i cant tell you how much you blessed me just now with this info, im in college and been tryna figure out a way to get my car painted without emptying my pockets. i was getting real discouraged from the info from other youtubers and forums saying i gotta drop a grand on a giant ass compressor alone😂. U a life saver for sho
Glad I could help out Breezy, you definitely don’t have to break the bank to paint your car 💯💪🏾
This was a very outstanding video , great results on the Tahoe , sub earned
Thanks FNG83 I appreciate you checking out the video and subscribing to the channel!
The folks that say it can't be done either don't know enough, or charge big dollars for a paint job. Excellent video.
I'll be doing my 93 Z24 soon with an 8gal compressor, some water/oil filters, and some single stage. Two tone is also a good option for a small compressor setup as you can split up the spray time.
There is plenty videos on people doing paint jobs with small compressors so we can put that myth to rest…what color are you doing your Z24?
i remember the good old days hanging out in a garage working and painting cars with a couple old buds looks good, keep up the good work
Thanks Lisa I appreciate that and appreciate you checking out the video…it would be nice to have more good old days!!!
Came out great UPK!! Wow it came out sweet and love the color!
Thanks bro and I think it came out nice as well better than I thought it would actually
I’ve never seen this channel before and I’ve been watching CZcams and auto body vids for more years than I can count.
This gentleman is humble, not a loudmouth and spitting facts.
I have different compressors, but for mid size jobs I use a 20 gallon husky from Home Depot. I spray clear in the mid 30’s for PSI with my 1.3 Iwata and I can hold the gun wide open nonstop and it and I never lose air pressure. It builds enough pressure that it’ll still shut off from building enough air.
Honestly
, you could use a ten gallon compressor to paint a hood, or a few panels at a time.
The only things I’d say is run the 1/2 inch air hose keep the hose as short as possible use the bigger fittings, make sure you get a compressor that takes oil, make sure you use a moisture trap before the gun…….. always make sure you open the bleed valve on the compressor when your done using it.
Most of the guys on CZcams even the diy guys make a lot of this stuff sound wayyy more complicated and confusing than it really is. Spraying is the easy part. The bodywork and prep is the hard part.
You’re spitting all facts and I appreciate you leaving this comment 🙏🏽💯
I have owned a Sprayit 3300. It was a great gun BUT after four paint jobs the inner teflon bushing for the needle started leaking and I was unable to get any parts for it. I would definitely recommend this gun to anyone. Just be aware of issue after a couple of uses.
Did you use it doing 4 complete jobs when it started leaking? I myself have used it 3 times now and definitely will keep this in mind and appreciate you letting me know about this
@@UndergroundPaintKing yes unfortunately it did. But it was definitely a good gun. Not sure if the 3300 has better parts. I do play to purchase another one for small jobs. I used a Tekna copper now GREAT GUN!!
Amazing job love this channel.
Thanks General, I appreciate you checking out the videos 🙏🏽💯
Brother this is utterly amazing what you did!!!!
Thanks bro I really appreciate that…thanks for checking out the video!
For what you had to paint that it looks great nice job 👏
Thanks Charlie I appreciate you checking out the video 💯🤛🏾
I've been binge watching your videos. After watching another painters' channel. He's got a million dollar booth and arsenal of paint guns that cost more than my cars. You just get it done! I've been using the old Harbor freight pro gun for projects for 10 years. I normally shoot single stage urethane and it does a great job. But I'm on the fence now to get that Spectrum or Get the Astro. I see these other guys with booths and fancy climate controls and $800 guns they have orange peel, fisheyes, and dirt nibs everywhere. You spray in your little garage and it looks like glass. I did the roof of my 63 GMC panel truck in my driveway under a canopy. Great channel! You are the U.P. King!
Thanks I really appreciate you for this comment because I really try to show people that you can have quality work done by you yourself and not have to have all the fancy equipment that others say you have to have…again I appreciate you checking out the videos and I hope they help in any way possible!!!
Thanks for the video will definitely grab an LVLP.
You’re welcome and I appreciate you checking out the video!
Ima do this Elco single stage. I was thinking of doin this exact set up. You just made up my mind. Good work n great video!
Thanks I appreciate you checking out the video and glad it could help in anyway!
I love my people's 👋👋👋👋👋👋👋👋👋. I can feel the humble spirit👍. Great job king.
Thank you I really appreciate that and appreciate you checking out the video!!!
i watched ya last vid ordered this gun opened it on my channel couple days ago live after seeing this i wanna have me another one on deck lol and the money i would spend on a larger compressor i can buy some paint :-)
Definitely can go that route and save you some money and put it towards your paint
No complaints...Good job UPK!
Thanks I appreciate you checking out the video!
I can't upgrade the electrical in my house enough to run a bigger compressor. I have the same compressor. It's good to see you don't have to stop every time the compressor kicks on. Great video.
Definitely keeps consistent air flow so you can definitely get the job done with a small set up!
UPK back at it.! 🔥🔥🔥🔥Showing you a real painter compensates no matter the gun or set up to get that same good result! Props man. Those Tahoes are a lot bigger in person.
Bro them Tahoes really are big in real life…I appreciate you bro as always 💪🏾💯
Looks good. But why on earth would you paint over the emblem glue? Just asking.
Painting over the emblem glue doesn’t effect anything an shows you where exactly the emblem placement is…I appreciate you checking out the video!
Looking real nice I painted a 1964 Impala those low volume gravity-fed guns are good it does the work real nice just like your Tahoe it came out real good.
Glad to hear you had a great experience with a lvlp spray gun Manuel 💯
Big props!! Unbelievable finish looks amazing
Thanks bro I appreciate that and appreciate you checking it out!
You my friend got a new subscriber!.. 👏🏽👍🏽 looks good now I need help finding out the measurements on how much reducer and paint and clear coat to use I would I appreciate that’s where I need the help of you have video of that already please link it on my conversation thank you
I appreciate you subscribing to the channel and I do have a video that may help you
czcams.com/video/GU1XFq6SWDY/video.html
How you mix your paint and clear depends on the brand that you go with and their mix ratio for their products so just check the label of the products or get tech sheets with the information on how to mix
No sé inglés pero es "awesome"
Gracias, te agradezco que hayas comprobado el vídeo!
Peeps telling me I need a 60 gallon tank. You the man great info. I like alternatives. I am motivated now.
Glad the video helps Killa Bee, you can definitely get it done with a small setup!
Love your vids King. I use the same compressor and have done cargo vans with high top roofs that came out perfect. The trick with the drain is great. I didnt think of that, but i did use the towel taped to the end. Customer was happy tho, paint job came out clean. Keep working bro!
Thanks Jamie it always good to hear people getting great results with a small setup…I appreciate you checking out the videos!
Nice job painting that beast with the LVLP and a HF compressor!
Thank you sir! I appreciate you checking out the video!
Absolutely amazing work
Thanks I appreciate you checking it out!
Awesome man! You’re giving the confidence to give my little car a shot at a new life!😎🤙🏋️♀️
Go ahead and give it new life Bunt💯 you can definitely do it 💪🏾
Great job , so informative, your help with understanding how to paint is very appropriated , thank you.
You’re welcome and I’m glad the video was helpful!
That's an excellent job there. It looks like the only difference between a big set up and a small one is it will take longer to paid t, that's all. What a fantastic job you did there!
Thank you sir I appreciate that and yes it may take a little longer but you want to take your time painting and not rush through it! I appreciate you checking out the video
That little thing did the job now I know I won't have a problem with my el camino especially since imma be painting it in sections
Nice to hear that you had great results with it💪🏾💯
What results did you get? I’m trying to paint mine too
Couple months ago you talked about the spectrum HVLP, Harbor Frieght had a sale for 100 dollars I took your advice and bought it, tried it out clearing a front bumper the other day and it did a excellent job. Also took your tip about using microfiber clouth to wipe down base coat before spraying clear. Thanks so much for helping out with your vidios.
Nice!…I’m glad I could help out 💪🏾
I’ve been waiting for this video! Thank you sir.
You’re welcome and I appreciate you checking it out!
I think you are a pro and made it look easy. Awesome 👍😎
Thanks I appreciate that and appreciate you checking out out the video 💯🤛🏾
Great video! I've watched other videos on that sprayit that made the claim of the sprayit not having enough volume to do a full paint job (they had the p.s.i. way too low to begin with.) You just proved them wrong 👍
Thank you I appreciate you checking out the video and glad this helps to prove otherwise!
Just the video I needed to see. Appreciate it homie! ✊🏿
You’re welcome and I appreciate you checking out the video!
Just stumbled upon youre chanel OG. Love that you straight to the point. i was just about to go buy a 60 gallon compressor this weekend to get my side hustle started until i saw this video.keep up the good work god bless
I’m glad you came across the channel J and I hope it’s helpful to you on your side hustle 💯💪🏾
That was crazy man! It should be noted that you are obviously a talented painter. I’m shocked how well that came out without a dryer, but I guess credit the drain drip tip. Your technique looked great!
Thanks I appreciate that and appreciate you checking out the video…I’ve always liked letting my clear air dry rather than forced dry just seems to allow the clear to flow out better in my opinion
Bro I'm blown away, Nicely done!
Thanks I appreciate that and appreciate you checking out the video!
Just got one of these guns in after your initial review. it's nice to see it being used on something that large. Love your videos and the information you provide. Keep up the good work.
Thanks I appreciate you checking out the videos and I hope they help in anyway possible!
@@UndergroundPaintKing at what PSI do you have your compressor at???
@@luisurrutia7344 90 psi
@@UndergroundPaintKing I think at 150 psi..
@@luisurrutia7344 your compressor is 150?
Got me movatied to pick up my 1st spray gun nice job need to check out the videos again for part# I remember you saying 1 was heavier than other definitely been watching 👀✌🏽
That’s what I like to hear…the first video was on the Campbell Hausfeld spray gun which I need to do another video on but both will work good for you!…I appreciate you checking out the videos 💯
Super paint job upk looks great. I use that tip too on the compressor too for my air tools it works good. Great video upk
Yeah it’s a great tip and can save your tools in the long run…Thanks James I appreciate you checking out the video!
Thanks for sharing this knowledge. I thought I needed a 60 gallon $compressor $ but 30 will do. I am going to spray a 2015 Dodge Challenger rear quarter panel with my 30 gallon compressor. No excuses gotta get my project done. I have hope now 🙏 thanks
You’re welcome Jeremy and your 30 gallon will be plenty for knocking out that quarter panel 💯
Been waiting for this one for a long time, you bring lots of inspiration for the little guy, good job brother.
Thanks I appreciate you and hope I can bring more inspiration to others!
@@UndergroundPaintKing just found your channel and subscribe.
@@MegaWatching thanks I appreciate you subscribing to the channel!
Awesome video. Good to see LVLP getting some love as other channels don't cover it enough for the guy at home on a small budget. I started off with a cheap HVLP set over 10 years ago, then moved to an Astro Evo LVLP shortly after. It's a learning process, but knocked out a 1991 S10 Blazer with it. Seen the Sprayit guns years ago but didn't know they were still available. Will definitely check them out.
Thanks brotha!
Thanks I appreciate you checking out the video and like so many other people I started with a small compressor years ago and I do my best to shop people that they can do it even with a small budget…again I appreciate you!
ASTRO Evo is a good gun
@@mitchellferre1652 yes, it's still spraying well even after all these years. It's a shame they discontinued it, but I've read somewhere that it shares parts with one of the older Iwata guns and another brand. That makes it repairable and upgradeable.
Thanks guy for another great video👏🏼👏🏼👏🏼
Thanks I appreciate you and appreciate you checking out the video 💯
That is awesome. One of my fav colors as well.
Thanks I appreciate you Ken!…a lot of people love this color
New that little gun would knock it out of the park before I even pressed play. Nice to see you gave it a little more PSI on the clear.
It definitely knocked it out the park!
Paint looked good! Just ordered the R500 and ALL THE TIPS(4)
Thanks Hogman22 I appreciate you and you’re going to like the SprayIT 💯
Bro. Thanks for this video!! Thanks for providing that.
You’re welcome Miguel!
Thanks again man, just got the summit gun with this exact compressor, all under 200 bucks!
Nice!…I hope the videos are helpful!
Just watched your video. Great info. Now I have subscribed to your channel so I don't miss any more and can go back and watch your others. Keep up the good work 👍
Thanks I appreciate you checking out the video and subscribing to the channel and I hope the videos help out!
Thank you my G!!! I have an 04 Denali I want to paint and this video answers everything I wanted to know... Peace and Blessings 🙌🏾 🙏🏾
You’re welcome and I’m glad the video was helpful 💯💪🏾
Came out super nice 👍🏻👍🏻
Thanks I appreciate you checking it out 🤛🏾💯