Thank you for your beautiful videos I have a question I have the same problem The dealer told me to replace the BCM And I would like to tell you what I am thinking, causing problem I have water leaking on the third brake lights Also, I put LED lights highbeam, low beam, foggy light and I put off-road light connected to the battery Do you think this is the causing problems that thing that killed the bem? Or it's another thing I just want to be careful before, but the new bom Thank you so much for your time Hopefully I get answer
I have a 2016 F150 The BCM was flooded with water. All the instruments display, radio and AC not working. I bought a used BCM..how can I transfer from the old BCM to the used BCM. The car cranks but does not start. Please advise
I just put a used bcm,"sjb", in a 07 explorer sport trac straight from pick n pull to see if all lights would at least work and everything works, started up and hooked code reader to it and still shows right vin and mileage. Why would it still need to be programmed
Need a little help here, dealer is say they can not program bcm unless I have my tire sensors replaced first,, what,, they got it going but they could not program it completely till they change these sensors it will not complete the.programming. really people! Need some in put here
Hello I have a 2017 F150. And start having some problems with the Horn, headlamps, hazard lights and radio stays on sometimes. Door locks keep clicking. Can this be a problem with BCM?
Who can I go to besides the dealer for this. I called a few places and they do. ot want to deal with this. I need to reprogram a used bmc or i can buy one programmed to my vin but need to program the primary key. The dealer wants to charge me over $1000 to replace install and program also diagnosed the car
Great work keep it up
Thanks boss
Good job bro
Ok boss
Thank you for your beautiful videos
I have a question
I have the same problem The dealer told me to replace the BCM
And I would like to tell you what I am thinking, causing problem
I have water leaking on the third brake lights
Also, I put LED lights highbeam, low beam, foggy light and I put off-road light connected to the battery
Do you think this is the causing problems that thing that killed the bem?
Or it's another thing
I just want to be careful before, but the new bom
Thank you so much for your time Hopefully I get answer
It could cause it
Please while doing the perimeter reset with the auto, do u still need dealership authorisation or autel does it without license
No
Thanks master 🙏
You're welcome
I have a 2016 F150 The BCM was flooded with water. All the instruments display, radio and AC not working. I bought a used BCM..how can I transfer from the old BCM to the used BCM. The car cranks but does not start. Please advise
You will need a programmer to program the bcm
Do a parameter reset on BCM
I just put a used bcm,"sjb", in a 07 explorer sport trac straight from pick n pull to see if all lights would at least work and everything works, started up and hooked code reader to it and still shows right vin and mileage. Why would it still need to be programmed
You don't need to program it
This one works for 2018 f series? Is it required any license in order to do that?
No license
@@ADDAUTOMOBILESERVICES one more question, the eBay version is the same stuff than the one sold in official store? Thank you for respond.
@@Julicauto you will not get technical support from them will advice you to buy it from their official store
Need a little help here, dealer is say they can not program bcm unless I have my tire sensors replaced first,, what,, they got it going but they could not program it completely till they change these sensors it will not complete the.programming. really people! Need some in put here
You can do it without the tire sensor but you can calibrate it
Did you program the BCM to the vehicle before the keys?
No you need to program the key to the BCM and do parameter reset
Hello I have a 2017 F150. And start having some problems with the Horn, headlamps, hazard lights and radio stays on sometimes. Door locks keep clicking. Can this be a problem with BCM?
It can be the bcm bcos it controls all of the but please test the system first
@@ADDAUTOMOBILESERVICES hi do I need a im608pro to check the system? Or can It be something else
You need a diagnosis machine and a wiring diagram to check the system
@Jevon Wilson any scanner with active test will do
Yes
Who can I go to besides the dealer for this. I called a few places and they do. ot want to deal with this. I need to reprogram a used bmc or i can buy one programmed to my vin but need to program the primary key. The dealer wants to charge me over $1000 to replace install and program also diagnosed the car
You can go to any programmer with im608
I wish you can fix my angle sensor for honda civic 2015. In dubai
Whatsapp me
Do you know if the xtool d8 will do it reprogram bcm
No it can't
So With this model ill be able to program the used bcm and program key
Bro you should make a video w204 ESP coding using the Im608
Ooh ok soon
I think the abs light is on due to the vin mismatch.
👍
Is this a new bcm or is used one
No used one
Sweet I'm buying a autel ultra and I have to program a use bcm on a 2016 f150
You will need im608
@ADD AUTOMOBILE SERVICES thank u I will look in to that
@@YourAverageFNAF_Edits 👍
You’ve Ghana man? I be Ghana man too. Eti sen?
👍
Can I use im508 to program 2017 f150 Bcm?
Yes
@ADDAUTOMOBILESERVICES tanx
@ADDAUTOMOBILESERVICES but why this machine update is expensive?
@@emmanuelocran52 BCOS of the diagnosis side and most of the things other machines charge token for it is free on this tool
@ADDAUTOMOBILESERVICES but still the update is too expensive