Replica surefire IR Illuminator
Vložit
- čas přidán 5. 07. 2024
- Comparison between a real Surefire white light/IR Illuminator and a replica Surefire white light/IR Illuminator.
Music: On Top
Site: icons8.com/music/
US $51.79 30％ Off | IR Light M600V-IR Infrared Fashlight Scout Light White Light and IR Output 20mm Picatinny Rail with Pressure Switch Hunting
a.aliexpress.com/_mrVUI8G
Instant sub. Love the no frills no bs review. 52 bucks for a decent light with that capability is just great
Dead spot is from how they tried to fit the IR led chip next to the Led chip in the bulb on the light. They tried to center the led Chip more and pushed the IR chip to the side so that’s why you see a dark spot. The real version is made with a lot better quality so you don’t get this affect
the deadspot is due to how the visible/IR LEDs are placed next to each other. The deadspot you are seeing is the visible LED - the real surefire gets around this by rotating whatever LED is being used to the very center
Negative. The ding dong attached a can between comparison shots. That’s the source of the shadow.
@@LUXINK I encourage you to put the clone and real light next to each other. The poorly centered/oriented LEDs on the clone produce some pretty clear pattern differences
Maybe i missed it. Does the Chinese light have a red glow when on IR mode?
You got a link for the light? And do they make then with the pivoting pro style mount?
Somogear PEQ-15 + WADSN M600V is what Delta uses now I heard.
But you have to spray paint it with krylon or rustoleum. That how you know you're a real operator.
Mine has the same deadspot. It also holds up fine to 5.56 and doesn't flicker under recoil. I have an elbit WP thin filmed 2163 FOM pvs-14 and have found I only need the IR function for inside structures and this does that just fine. Longer distances are for the designator imo. I've got enough rounds on it to say I'd trust my life with it.
Can the sotac one get focused in?
Can the clone be focused in?
What monocular are you running (gen 2/3? FOM? Purchase Link?) It looks good outside even with all those street lights.
This was an envis gen 3 with unknown FOM. You can find this particular monocular on eBay for around $1850
Additionally these housings are known to be somewhat cheap. The battery door on mine is cracked. Highly suggest getting a PVS14 or a NI Tanto
Modern gen2+ like Photonis 4G+ is way better than this.
The tube in the video has a average fom of 1800 FOM. That's not bad and you definitely need nothing more.
But you would immediately see the difference when you looking at a Filmless 4G/ECHO+ photonis tube.
How well would your pvs 14 work in that garage without any ir illumination?
Pretty good actually.
Have you tried this illuminator on a shooting range? I'm just curios about it's ability to work with real guns, cuz it looks pretty solid
I have not tried it yet. However, I may give it a go. I will let you know how it works
@@offthex2519 So, have you tried it with real shooting .223 ?
I got an aliexpress vampire light on a swivel mount for my helmet as a task light/umbrella light, wouldnt trust this on my rifle but tbh has been pretty good on my helmet and its more than bright enough
That’s rad man, I’ve been considering this same option for my lid
I have had an old m600 I got years ago that was a clone that has been on a rifle with 5000k rounds in the Texas heat. Just remember that China makes about 99.999% of leds
@@JohnKrieger that’s a pretty good point!
Rifles need a sling, light, and glass or irons. I would rather get a ok light and use that extra for good irons and a quality sling
A surefire is not potted electronics. A makkoff or elzetta is. On a clone the housing is super similar and you could epoxy the electronics on a cone making is somewhat superior. The downside is of course quality standards on the electronic components. I know a ton of LE that have had a surefire “go bad” and many more who have had zero issues. For me one failing ever for that price point is unacceptable. I bought and extra clone as a redundancy that is not NV for 33$ on Amazon overnight shipped. Search: Tactical Flashlights, Black Rifle Weapon Light,Pressure Switch Included
As far as i can tell legit Surefire Scout bezels dont fit onto the Chinese copies. The tailcaps are interchangeable as well as mounts. I cant say that its impossible for say, a KM2 or KX2C head, to fit onto ANY Chinese copy because theres probably more than one facility making them so there could be discrepancies. However the M-series copies arent limited in that way. A legit LU60/Z32 combo will fit just fine into a Chinese M951 clone, Malkoff E-to-M adapters fit Chinese MH90 light body clones and therefor all Scout heads (minus duel fuel) can fit onto any Chinese M951/M961 style of weapon light. There are lots of different methods a Surefire can be cobbled together. Just lame that Scout head threads werent used for most, if not all of the Chinese M600 copies. As for M340 and M640, i cant say.
The ir head will fit onto the Amazon NON IR clones bodies. But not the other way around. I’d bet the real surefire heads would also fit. 🤷🏻♂️
You wouldn't trust that peq clone on your real rifle? It might be worth trying. Passive shooting through the eotech is nice but it's way easier using the laser under NODs.
I have a separate IR laser that I use on my real rifles. Heard a few people having issues with the Somo gear on real rifles
Definitely not. Go for LASERSPEED! For real Steele.
Big issue with flood is the dead spot is shadowing of your rifle, I sold my Zenitco klesch because of the issue, I'd buy a surefire vampire m952v or v1 b for my personal use, I don't like that at all about flood of the Chinese led knock offs.
lmao, 108 subs ...no biggy, girl walks in & this is all completely normal, Sr Cheeseburger 🍔is larping again alone in the garage, Why do i get the feeling the same reaction was giving when she waked in finding him wearing her pantys & bra with helmet on ..Keep up the good work bro bro.. I'm out!