Adding Z-Wave To Home Assistant (Including Home Assistant Yellow) 2023
Vložit
- čas přidán 30. 06. 2024
- In this video we'll be going over how to install and set up Z-Wave Plus within Home Assistant. Installation will go over installing the Zooz 800 Series Z-Wave Long Range GPIO Module ZAC93 LR in a Home Assistant Yellow but these steps can also be used for Home Assistant installations outside of Home Assistant Yellow and the Zooz ZAC93 GPIO Module, including USB Dongles.
Steps include:
🏘️ How To Install Zooz Z-Wave GPIO Module Into Home Assistant Yellow
🏘️ How To Setup The Z-Wave JS Driver In Home Assistant
🏘️ How To Add a New Z-Wave Device To Home Assistant
🏘️ How to Exclude a Z-Wave Device From Home Assistant
Looking To Buy?
Zooz 800 Series Z-Wave Long Range GPIO Module ZAC93 LR: amzn.to/3NORP9f
Zooz 800 Series Z-Wave Long Range S2 USB Stick ZST39 LR: amzn.to/3B31Vfl
Aeotec Z-Stick 7 Plus, Zwave Plus USB: amzn.to/41gzt3W
Additional Links:
Home Assistant Z-Wave: www.home-assistant.io/integra...
Additional Supported Z-Wave Controllers: www.home-assistant.io/docs/z-...
-------------------------------------------------------------------------
To disable Bluetooth on RPI3 (thanks @1234bennyd for the tip!) :
login
vi mnt/boot/config.txt
Added the line:
dtoverlay=disable-bt
Save file, restart and you should be good to go
-------------------------------------------------------------------------
Join this channel to get access to perks:
/ @beardedtechguy
🔔 Subscribe to the channel: bit.ly/SubscribeToTBTG
Looking for more videos?
► Check out my newest video: bit.ly/NewFromTBTG
► Check out my most popular video: bit.ly/MostPopularTBTG
► Have a lot of free time? bit.ly/BingeWatchTBTG
Looking to support the channel?
Tip through Paypal: bit.ly/PayPalDonateBTG
Check out my Amazon shop here: bit.ly/TBTG-AMZN
Sign up for a Channel Membership: / @beardedtechguy
Want to see other great tech content? Follow me on other platforms!
Twitter: / beardedtechdude
Facebook: / thebeardedtechguy
Instagram: / thebeardedtechguy
Pinterest: / thebeardedtechguy
Website: thebeardedtechguy.com
Discord: / discord
Looking to grow your channel? Check out TubeBuddy! A great tool to help keep an eye on how your channel is doing: www.tubebuddy.com/TheBeardedT...
Chapters:
0:00 - Upgrading Home Assistant With The Zooz Z-Wave 800 Series GPIO Module
0:27 - Z-Wave 500 Vs Z-Wave 700, Vs Z_Wave 800 .... Wait, what about Z-Wave 600??
1:00 - A Warning About The Zooz 800 Series Z-Wave Long Range GPIO Module ZAC93 LR
1:17 - How To Install Zooz 800 Series Z-Wave Long Range GPIO Module ZAC93 LR Into Home Assistant Yellow
3:15 - How to Setup Z-Wave On Home Assistant
4:48 - How To Exclude A Z-Wave Device From Home Assistant
5:28 - How To Add A Z-Wave Device To Home Assistant
#homeassistant #homeautomation #z-wave
The products shown is this video were purchased with my own money and all opinions about them are of my own without any outside influence.
🔥 🔥 🔥 Do NOT click this: bit.ly/DNTCLICKME 🔥 🔥 🔥
Links in this description and in the comments section may be Affiliate links. These links help support the channel and are free for you to use. When you buy something on the linked sites, a small percentage is paid to the channel. This helps me reinvest in new hardware and equipment to keep making more high quality videos. - Věda a technologie
What are some of your favorite automations that you run in your Smart Home? Let everyone know below!
I love your dry sense of humor :)
I just wanted to say that I followed your video everything worked perfectly! Thank you :)
I'm glad you found the video helpful!!
Great video!
thank you!
Thanks for the video!
I was able to turn off bluetooth from the ha console (Rasp Pi 3)
# login
# vi mnt/boot/config.txt
Added the line:
dtoverlay=disable-bt
Save file, restart and you should be good to go
I'm glad you liked the video and thank you for the tip on disabling Bluetooth! I added it to the video description in case anyone is looking for that information
thanks. please make a total noob video on everything unraid.. with SMB explained also how to use torrent and prowlarr with openvpn. how to setup plex with hardware transcoding
So I have a home assistant yellow that should be here in a couple days and I ordered this z wave device before hand. Would I be able to install it onto the yellow before i boot it for the first time?
Great video. Have you backed up and restored NVM? I tried and bricked my 2nd ZST39. Has this happened to you? How do you fix it?
Glad you liked the video!
I have not tried to backup or restore NVM. It seems like it might be broken for the 800 series based on this: github.com/zwave-js/node-zwave-js/issues/5257
Off course with my luck it failed to install. Sent a ticket to manufacturer but don’t know what to do now.
Hello I have an old veralite with about 25-30 zwave devices attached to it and several scenes that get used daily. Here lately it’s been real bugging and seems that Vera sold out and is not supporting it anymore. Can the home assistant with a zwave card handle this many devices and scenes? Thanks.
Thanks for the video. I'm a little confused by the disabling bluetooth part. If I'm using the onboard bluetooth of my raspberry pi with Home Assistant I won't be able to use it when using this card? I have to choose Z-wave or Bluetooth?
The installation instructions for the GPIO module have the following "NOTE: You will need to disable Bluetooth when using this module and install it on pins 1-10 (including the 5V pins). Please keep that in mind when planning your hardware installation."
I believe this is in reference to onboard BT and would not matter if you have a USB dongle for BT. Likewise, there is an 800 series USB dongle Zooz has that could be used instead of the GPIO module and does not have the warning about having to disable Bluetooth.
Here is a discussion I found on moving UART around on the RPI4: forums.raspberrypi.com/viewtopic.php?t=340412 . Not sure if helpful for your usecase.
Just a note - with the HA Yellow Bluetooth is dependent on the Raspberry Pi CM installed (the one that comes with the "complete kit" does not have Bluetooth onboard).
@@BeardedTechGuy Thanks BTG. I liked how the GPIO module would be compact and discreet and remove the need for another dongle. I'm already using a zigbee dongle and a z-wave series 500 dongle, so this was appealing. I'd hate to trade Bluetooth for it. (even though my z-wave devices outnumber Bluetooth 35 to 1. :) )
I haven't found a use case for Bluetooth yet (probably because I've had Home Assistant for a few weeks only now lol) but I think if I end up needing Bluetooth I might look into doing Bluetooth proxy. Seems kind of neat and removes the need for a dongle :)
Out of curiosity, what are you using Bluetooth with Home Assistant for?
I have read that ZWave JS doesn't support Long range yet... Is that still true?
I saw that a while ago but I can't find anything on it being supported or not supported now. I don't see anything in HA that indicates anything, and I only have the controller that's 800 series so I can't really test it out either.