Video

Not the smallest.

Can I add Samsung Frame TV to Switchbot?

Gods work. Thanks man!

Do you use any mmWave sensors in your smart home? Let me know which ones below!

I have 4 cats I don’t think this is a good idea for multiple cats

Thank you so much for this great information! I just ordered, used your link, and let LR know that I heard about all of their cleaning products from you.

I found accelerated hydrogen peroxide wipes to work great

Really could use some help, there is no call to service in the automation . Can add speaker but no text to speak entry.

i had mine for 5 months now out of no where its not connecting and asking for a password to connect to the unit?

yes it is.

No way mine is this clean! 😅

This thing sucks Soo bad. I had it and it keep going in my my music. And it's terrible

Added to my "Useful" playlist.

Note : using HAOS(not docker) installed in X86 pc with cloudflared and a cheap domain , in api and tokan port is not required if added its not able to connect

im using samsung S23Ultra to download google home when i add device test home assistant successful to add device and also in home assistant press the sync also working well but after awhile cannot use in google home then i try to reconnect the test home assistant was shown could not reach test home assistant, in home assistant also cannot sync anymore when i press the google assistant sync

Exelente video

Thanks! What I've been looking for! I want to make physical button trigger my goodnight rutine in Google Home. Using a switch it works but it's not ideal since it can also be triggered from within Google Home. Can't see it's possible to use a door sensor in google home - Alexa support that but I've discontinued use of Alexa as I got tired of it not removing dead devices automatically and it became really cluttered - as well as it's not supported in my native language.

just a great video

I Think if you simplify and explain custom url and how to get it, that will be awesome, because that is a missing piece for some of us i guess.

I added a new device in bond and its not showing up in smartthings how do I get it to show up?

What if the ma 1 doesn't blink like you described? How do you reset a ma 1 that was previously working then stopped? How do I know if it's broken?

work with 350mhz fans?

Which desk are you using?

I'm stuck on being able to have a HA automation where if I say "Hey Google, the king has entered" to my Nest Mini, it will perform the automation and turn on the lights. Do you have a video on how to set up a voice command in HA assistant to be said to Nest Mini and the automation is performed?

are you still checking this video?? Can't get past the "activate Roomba" (I have the S9+). I press the home/spot buttons simultaneously and nothing happens. Advice?

Look into Petkit Litter Robot has an SEO positive name, but frankly they are designed poorly. the metal rusts rapidly and there are WAY too many nooks and crannys for dust, gunk and litter to accumulate. Having any litter robot is nice, but this robot is not worth the $700 they charge. Find other brands . The one pro is the size, but it's also worse at letting stink out (worse than petkit)

Does it need to connect via Wi-Fi too or just Bluetooth? I am looking for one that is just Bluetooth because the one I have has to use both and it kill my phone battery quickly. Also, does this one disconnect from your phone randomly?

how to make HA access via HTTPS but not via HTTP? fucking HA

Stay away from Honeywell/Lyric/Resideo Water sensors. They constantly lose connectivity to the network, they eat batteries and their customer service and support is non-existent. Incredibly dissatisfied with them...

Thanks very much easy and helpful

Great video. Thanks dude.

Love the looks of that vaccume cleaner!!! Can you provide info on it? Thanks! Also great video!

I have followed this to the letter the only difference is that I entered instead of which is how my HA is served ATM. all seems well on the google API side but obviously home app not seeing this. How do I change this to https without NABU CASA? I ready you need duck DNS etc etc the mind boggles...

Excellent video! Thank you oh so much! 😺

Stuck. Devie says looking for android auto

Nice video. I've been thinking about getting one for a while now. What would the drainage on the phone be? As not connected to the car, for example a 3-hour drive using maps, Spotify, etc?

Do i need to have enable BT on my phone after ive configured connection with motorola?

OK, so I purchased one of these indoor cameras and the little black silicone unit for attaching it to my window. I inserted an SD card when it the instructions asked for it. I recorded 24 seven onto my SD card. Then it says out of data. Well, I had no clue what data was. But the camera wouldn’t record. So fooling around in the settings, I found a spot that says format the SD card and so I clicked on it and then deleted the previous days 24 seven recordings. Then I went to another spot under in the setting, and it showed how much there was a little chart that showed how much was on the SD card and it was showing that it was about a third full. So how do I erase that where it shows there’s nothing on it any longer?? And also, I don’t understand what is a format of the SD card? What do I format it to or of? My SD card and camera just look out over my backyard or in my front window towards the road if I place it there. So I go back and I look at. I skim through all the recordings to see if there’s anything useful and if not, then I delete them all , but it’s hard to believe on the lowest setting in my camera that an SD card could fill up in 24 hours! When I first installed my SD card when I first purchased my camera, it took days to fill it up! 24 hours and it says out of data😮 I believe my SD card is somewhere around 258, not the 64. So should my SD card be filling up in 24 hours?? The recording quality is on the lowest so why would it be filling up in 24 hours? Can I purchase bigger SDKs that hold 56 times as much so it doesn’t run out in 24 hours? I just don’t understand it all. it’s so confusing and I don’t have anyone to help me. 😵‍💫 yes you probably guessed, I’m over 60 and I don’t understand all this technology! Thank you for any help you can give😊

may I ask you what kind of car do you have????...I have a 2023 Hyundai Sonata...

What smart watch are you using?

What are your thoughts on the latest smart lock from SwitchBot? Let me know in the comments below!

This was a great tutorial. One issue though, how could i enable the google asssistant on home assistant to access personal information. Like my calendar or name. Whenever i try it says i need to enable it but it never works when i try. Ive followed the official guides on HA but nothings worked. Any tips?

This was super helpful, straight to the point, and easy to follow! It made cleaning the robot seems much easier than I thought it would be. Thanks!

I’ve tried several times but I’m getting no supported files when I plug it in my van is the correct port. The files are mostly TAR files, is that correct ?

First of all, you don’t need to wait to dry when you just clean with wet cloth, you just dry with kitchen paper , After I come here to see how to open for clean, and you don’t show, you teacher how to wash, for real? .. who don’t know how to wash anything dirty? 😊

Off course with my luck it failed to install. Sent a ticket to manufacturer but don’t know what to do now.

it doesn't work, no matter what you do. What's funny though, is to go to a Kia dealership and have them try and do it. Then laugh and tell them that you want your money back for a service that doesn't work and has never worked. Paying $199 for a service that doesn't do what it's supposed to do is just plain stupid. If they can't update the Navigation System at a Kia dealership, what the fuck????????????????????????

Ty. Great video. Is there motion detector and a way that they notify you that the cat is approaching the feeder? Is the notification through sound, to alert me that my cat is approaching the feeder, or through a written message? I need a feeder that will notify me by a sound or voice message when the cat is approaching, not written message. This would be helpful when I'm away.

FLINGS THINGS OUT My LR4 flings things out as it cycles. This has happened multiple times - - where I've found an incident or literally watched it happen. Its not my cat pushing things out, but the lr sending something flying as it is cycling. There needs to be an update asap that makes the clean cycle run slower. Anyone else have this issue? I've tried with the guard. Without the guard. Even tilting the robot back a bit. Commenting this everywhere so i can get a fix faster.

I wonder if there are limitations to the send text command because when I try to put the text command "play sex and the City on Netflix," it doesn't work. Same thing when I try the text command "turn off ambient EQ." A command like turn on the light worked but I don't need Google to control my devices cuz that's what my home assistant is for. I want Google to do what Google does using an automatic command from home Assistant That way I don't have to use my voice. Anyone have any insight?