Making a titanium framelock: Knifemaking, Part 1
Vložit
- čas přidán 25. 07. 2024
- Part one of my build series featuring me making a titanium framelock in my knifemaking workshop in Australia. The knife design is called the Primus and its a design I have been producing since 2015. Cpms35vn is the blade steel and the frames are made from grade 5, 6al4v Titanium. If your interested in more of my work please check out my online store and my social media. Thanks
-Dom
Online store:
dbblades.bigcartel.com/
Patreon:
/ dbblades
Instagram: db__blades
db__blades?hl=en
Facebook: DB Blades
DB-Blades-1483155085239739/
Tictock: DB Blades - Jak na to + styl
Events like corona, when you cant get consumable products as you do usually, make you question if you should really replace something already. (As you did with your abrasives)
I had to grind a bunch metal clean for welding today and thought I ran out of a special type of angle grinder disc, since the shops are all closed.
Instead of stopping, I tried to squeeze the last bit of life out of the discs that i would usually have tossed in the bin already and was surprised that they held up for quite a lot longer than I anticipated.
In the end it took just a few minutes longer, but I probably saved myself 30 bucks in abrasives on a 1 hour job.
Loved this one dom.
fascinating!
I am going to tackle a folder soon! This video helps a lot! Great work along the way and incredibly informative man! Thank you for sharing the realities of knifemaking.
Glad it was helpful!
Sweet video, I just tried my 1st framelock, the little details were kinda what i expected, but for the most part I'm kicking myself for not trying it earlier. I think it got to the point where I just siked myself out... Definitely got a few pointers, looking forward to the next part. Hope you're staying safe, take it easy.
Glad I could help
You are a weapon on the hand tools!! Good to see the learnings that you made along the way... I didn’t realize bearings were needed but that sounds super smooth
they aren't really needed, washers work also. But bearings will give that glassy smooth action
DB Blades excellent I’m going to try a washer or 2 in a knife and see how it goes
Great vid as always. Appreciate the work mate. You inspire beginner knife makers like me to make knives.
thanks mate
Possibly the most nonchalant machining I've seen on CZcams! Regardless you're getting the desired results so good on you mate. I look forward to part two.
Pretty much. Most of what I did in this video was all non critical machining with stuff all tolerance requirements
Awesome vid. Even if it ain't smooth sailing all the way.
We learn as we go. Keep it coming.
Thanks, will do!
Love that you document the good and the bad.
Would you ever do a Primus flipper?
Probably not, there isn't any space in the design for it
Hermoso trabajo quisiera una navaja así
Great videos lately, Dom!
Love the "hobo knifemaking" haha.
Thanks! 👍
Great video mate!!👍Stay Safe!!😄
Thanks 👍
Awesome video dom. I was always having the leaking problem with my stainless foil wraps. I have alot better luck folding it 3 times on each side instead of 2
That's a good idea!
Nice Dom. Do a review on the paragon for us please!
sure
Great videos brother. I dont know how you do it man i would be so frustrated and would be breaking shit and throwing shit around the shop.
"I use them both just to fu** with people" this is what I come to CZcams for
Was one of those mine 😁
unfortunately yes
Hey DB, I'm trying to figure out this titanium question... So I have titanium scales that I'm going to drop in etch solution to remove the ano. The question I have is when I sand paper the titanium, the titanium then looks shiny (pretty much the same as steel)...How can I get the darker titanium color, kinda like you have in your thumbnail pic?
It's not like steel where I can just drop in etch solution and darken it obviously. And I don't really want DLC either. Anyway I hope my question makes sense. Thank you
Thank you for making the mistakes I would surely have made! Now to not actually copy you exactly! :)
What’s that model on the bench when you are telling us what went wrong.. it’s that long slender one in front of you????
thats secret stuff
In the case of a customer moaning about the stop pin out of tolerance thing on this knife ... what do you say?
Once the bigger stop pin is in its in tolerance
How does the American hardware being imperial match your holes and stuff in metric?? I’m having that issue now! Bought pivots and hardened pins all are Americans measurements.... but obviously all my drills and stuff are in mm..!!! New drill bits time?
New bits man. everything on my knives is imperial
Fuggin Math!
i know right
At what point will you just hate titanium so much you make a brass or copper frame lock;)
i could try hey