How To: Onewheel GT Bearing Change
Vložit
- čas přidán 9. 07. 2024
- Join Kyle in the shop as he changes his Onewheel GT bearings!
#Onewheel #bearing #howto
Tools Used in this video
Gyroscopic screwdriver:
amzn.to/3aElT6f
Torx Plus TP25 bit: (main screw size)
amzn.to/3PbRxHC
Torx Plus TP45 bit: (axel bolt size)
amzn.to/3OFUfW6
Swivel-Head Ratchet:
amzn.to/3GQxj4x
Digital Torque Tool:
amzn.to/3XFwKk0
Threadlocker:
amzn.to/3GZledk
Bead Breaker:
amzn.to/3z2ZMQs
Tire Lever:
1wheelparts.com/products/pry-...
Valve core Removal tool:
amzn.to/3ay3ojW
Tire Strap:
1wheelparts.com/products/tire...
Thanks for Watching!
This was sooooo helpful thank you!!! I messed up almost every piece of information you gave but still was able to get it replaced and running again
Bro you got this down. Really good use of the PVC and your press.
Very concise straight forward video. No bullshit music, no theatrics. Great explanation . Wheres your shop?
Just did my very first bearing change thanks to this video (plus some pointers from other videos) and holy crap, what a difference upgraded bearings make.
Thanks for checking it out! Glad we could help. Nothing better than the first smooth ride after riding on crunchy bearings!
I like the PVC protecting the magnets
Such a brilliantly explained video, this will definitely help anyone looking to change their bearings or even do a tire swap. Excellent work Carve Creative.
Thank you! We appreciate you checking it out!
great video! Definitely keeping this bookmarked for the future bearing change.
Thanks for checking it out!
Could y'all make a tire change video in prep for the Enduro that's coming?🙏🏻
Sure!!
Superior video as usual, ty brother! 🙏🏻🤙🏼🐉
Thank you sir!
Next level as always
Thanks Matt! Would love to ride with you this summer sometime!
Solid video!! Not a lot of bearing change videos out there.. I have a milled out XR hub on the way! Can’t wait to get back on a 6 inch hub! GTR time baby!
Thanks Mathew! Let us know how you like your conversion!
Where did you get your milled out XR hub?
Dayum y’all… Freaking killed this!
Thanks homie
Great video, thank you. Were you going to link the tools you used?
What a great video!!!!
Thanks Craig!
Excellent video!
Thanks DJ!
You da man Kyle!!
Mike crushed it with the camera skills!
Well done 🔧
Thanks Rick!
Nice vid....any word on where to get replacement o-rings or the size of the o-rings needs???
Hello. Thank you for the lovely info. Where can I buy that press and the tool you are using with it?
What diameter size and length of pvc pipe did you use to avoid magnets from gravitating towards the press? Also, will a 35mm diameter piece of metal work for pressing the old bearings out of the hub or can one use between 35mm-55mm diameter metal object?
3” coupling!
Where did you get your Ribe M8? Great video by the way!!!
Great video, looking to change to the grizzly bearings TFL has
Cool!
Have you needed to replace the Stator o-ring on the GT ? How big is that?
Well made
Great video. Wish I had seen this before I started breaking down my GT. Do you know if there is a way to replace the stator motor cable? The small plastic tooth inside broke off and now the cable won’t reconnect. Have not heard anything back from FM yet and just trying to see if there are options outside of buying a whole new motor assembly.
Unfortunately those are proprietary parts. You would need to find someone selling a GT stator to splice in a new connector..
Are one of the keys, not to disconnect the battery from the controller?
Have you tried swapping the XR hub onto the GT yet? I've noticed a few other people have done it and think that would be a cool video
Hoping to do that soon!
Great video Kyle, super useful! What size (diameter and length) is the white PVC pipe you're using to protect the magnets?
Thank you! That’s a 3” coupling in there
@@carvecreative Awesome - Thank you!! I'm going to attempt my first bearing swap soon.
Great Video! Where could I find a 55mm metal die to press the new bearing?
I bought this kit and it had the die…OrionMotorTech 23-Piece FWD Front... www.amazon.com/dp/B01FLVOAZI?ref=ppx_pop_mob_ap_share
@@carvecreative what's the size of the metal die you used to press in the bearing?
Hey there. I am wondering what torx bits the GT uses? I wanted to grab a set so I can use my drill. Thanks :)
Tp25 is the main size. Hub bolts are Ribe #8
Hahahahaha love it. How to de-FM your board is in full effect yet again hahaha
😬
@@carvecreative I absolutely love it. Huge innovation straight out the traps! Onewheel is in safe hands imo
What's that DeWalt screwdriver called? Haven't seen that unit yet and I like the idea of not having to change to forward and reverse all the time..
DEWALT 8V MAX Cordless Screwdriver Kit, Gyroscopic, 1 Battery, Electric (DCF682N1), Black www.amazon.com/dp/B011WRUODC/ref=cm_sw_r_cp_api_i_0A8KX875Z0X67FD118ZM
what was that torque setting at the end and why was it set to that?
18.5 ft/lbs.
hi, how did the locking ring on the motor plug feel? mine feels a Little lose but it still clicks in. I am trying to see if this is an issue
It wasn’t very loose for me. It was pretty standard and comparable to the pint motor plug
Update I’m setting my board back to FM. thank you for responding. Mine was so loose that I can’t even feel a click at all. But I compared it to my pint and my pint felt normal
So you said your GT feels like the pint. If so when I get it back from FM I will compare it to the pint again. 😄😄😄
What type of bearings came stock on the GT? My OG 4206 XR has stock FAG bearings.
Really?! That’s awesome! C&U is stock now. Nowhere near as good
Anyone know what size bit you use on the XR deck screws?
You mean the main screws? The ones that the footpads are?
For the arbor press what size is it exactly so I make sure I get one big enough.
3 ton 🤘🏻
@@carvecreative 🙇🏿♂️
Do u have a link or info to Exactly what Arbor press u got?
It’s not available anymore but it’s a 3 ton arbor press
Can you explain why I’m dumb and didn’t get the hub side seated correctly? I need to machine down the seating ring now, any suggestions?
You need to be very careful when pressing them and make sure you’re even by applying pressure
I wouldn’t machine that down unless you’re absolutely positive it’s not even
What type of bits are you using in the dewalt?
www.acmetools.com/shockwave-35-in-t25-impact-driver-bits-5pk-48-32-4579/045242548026.html
What lbs tq did u set the axle bolts to?
18.5 ft lbs
Yo, I would love to get some fresh bearings on my GT! Where you guys located?!
West Bend,WI
What did you torque the hub bolts to?
18.5 ft lbs
Is it necessary to remove the rail? Couldn’t you just remove the fender and front bumper, unplug, remove hub bolts and done?
That’s one way to do it. Removing the rail makes it easier to properly unplug/plug in the connectors. Many people ruined pint stators not plugging it in correctly. With the rail off you can make sure it’s right.
Hey b I’m wondering if I can use the same size pvc, and process for the XR bearing change
Also what bearing do you recommend best for 250lb rider
Thanks for the video
Yeah you sure can. That’s a 3” coupling
The FAG Shaeffler bearings are my favorite. You can get them at www.bobsstokeshop.com/product-page/schaeffler-fag-deep-groove-stainless-bearings
@@carvecreative thanks pimp you rule🤙🏾
@@carvecreativeyo b I just looked those up and they are 150$…. That’s a lot
Can you tell me the name of the stainless precision bearings and the ceramic
If the stainless last much longer that might be enough reason to get them
Did you do a range test before changing the bearings? Would be cool to see if there is a difference in mileage.
Not yet! This was 2 days ago and yesterday it was snowing. Planning to take it out tonight and tomorrow!
I was thinking the same thing! Would be awesome to know how much extra mileage
Varies with FM bearings. You only need one bad one in two sets and its dogshit early. Other times you can get daft miles on stock bearings. Like everything it's like a roulette table to a good board or not with FM always
@@redboyjan I remember on my XR after changing my bearings and breaking them in I had about 1 extra mile than my average. The stock ones weren’t bad either. I’m interested to see if it’s any better this time around.
Sorry I read that wrong yes we did do a range test! Onewheel GT Range Test/Sensor pad PSA!
czcams.com/video/dZ7ljK9xfuw/video.html
Hey Kyle , for the arbor press. I currently have a one ton , do you recommend a 2 ton?
I recommend a 3 ton. That’s what most shops are using with no issues
@@carvecreative thank you , I appreciate the response 👍🏻
@@carvecreative great video. It’s given me the confidence to tackle a bearing change myself. You linked a lot of stuff, some of which I’ve purchased already. I’d love to get that same arbor press but you didn’t provide a link for it. Any chance you have one?
Do you know what size the PVC coupling is?
3”
@@carvecreative Thank you, do you know a good cheap arbor press to purchase?
14:40 what torque values are you using?
18.5 ft/lbs !
@@carvecreative Immediately after watching this video, I drove to a Home Depot a half hour away to buy the only one of that DeWalt screwdriver I could find 😂
Hey guys, could you let me know which bearings specifically you used in this video? My GT bearings are 'gritty' need to replace them before they cause issues...
www.owmob.shop/product-page/premium-schaeffler-fag-bearings-for-onewheel
These are my favorite! I’ve never had one fail on me! Just make sure you get them installed with a proper arbor press!
@@carvecreative Thank you! I'm looking at a Klutch 2-ton Arbor press, I'll have to compare its dimensions with the wheel depth when I get a sec. Any drawback to using an H-Frame press instead?
@@FirstWeRide if you can find a 3 ton that’s ideal for onewheel hubs. The 2 should work but it’s a little bit small!
@@FirstWeRide yeah an h frame press is a lot easier to make a mistake with. You can build up so much pressure with those. That’s what I started with and it was ok but I was told I was very lucky I didn’t damage any bearings because of the hydraulic cylinder. It’s so much easier with an arbor style press. Goes in smoothly every time!
Is that a 2 or 3 ton press?
3 ton.
Does this void your warranty? or does just taking one screw out void it :-)
Nope!
@@carvecreative great!!
why doesn’t this void but large hills will?
👍🏾🤙🏾
🥰
I thought when you Take the Plug out.
Your Board will be locked 🔒 (Only Future Motion Can Unlock the Board)
He only took off the footpad and the hub motor plugs. He didn’t disconnect the battery
Yeah that only happens when you disconnect the battery from the BMS. Motor plug is all goooooood
Oh I see.
Thanks.
Of course when you try this on a old onewheel XR it does not really work, I can't get that engine plate of by rocking it at all. Cool vid still but most cases will be changing on old onewheel with all real problems you might encounter, not so realistic.
There’s some tricks to remedy that. You can get some bearing pullers to slowly get that cover off safely. If you do this be sure to be mindful of the PCB on the stator. You don’t want the clamps from the pullers to damage the PCB
Nice Billy Strings hat…
Thanks man! He’s awesome
The rib M8 didn't age well.
Focus depth is very shallow in many of your video shots. Not a good effect when trying to film content like this.
Thanks for the tip!