Scuba Regulator Service | First Stage Apeks FSR XTX200 | ASMR | Ep. 2 : Reassembly.

This is the 2nd Video in a series on Scuba Regulator Servicing. It focuses on Reassembly of the 1st Stage after Disassembly and cleaning.
See 1st Stage Disassembly Ep. 1: • Scuba Regulator Servic...
See 1st Stage Testing and Tuning Ep. 3: • Scuba Regulator Servic...
While the Regulator in this video is the Apeks XTX 200 FSR, the basics apply to other balanced diaphragm regulators in general.
Like, Subscribe and get Notified for other helpful Scuba Diving videos weekly.
If you are in the Philippines (Anilao or Bauan Batangas) and would like to learn how to Scuba Dive, take a Refresher course, fun dive or expand your skills with Advanced / Technical Diving courses, send me a message at:
[e-mail].
Warning: This video is a quick demo/overview of Scuba regulator servicing. This is not an instructional video. It does not contain all of the necessary elements and knowledge required to properly service a regulator.
You should receive formal training before servicing a scuba regulator.
Improper maintenance of a scuba regulator could lead to serious injury or death.
~-~~-~~~-~~-~
Please watch: "How To Fix A Leaking SPG for $4 | Easy Scuba Fixes"
• How To Fix A Leaking S...
~-~~-~~~-~~-~

[@race890]

Thanks for your great videos on reg dissembly and reassemble. I will check out your other video.

[@marklaverick3690]

Also much easier if you slide the HP Valve into the Turret Bolt
assembly, prior to installing into the main body, this is held in place by the turret bolt o'ring, also you need to torque this only too 5Nm (3.69
ft.lb)

[@godiveph1287]

Videos on the first stage Apeks XTX200 FSR maintenance:
Ep. 1 Disassembly is here: czcams.com/video/nLOQAD0yC1I/video.html
Ep. 3 Testing and Tuning is here: czcams.com/video/9Dp13sonDq8/video.html
For other helpful videos check out this playlist: czcams.com/play/PLoGCEaOoX2kdoibcXXsAW79YQcq7T02oh.html
Hope you guys enjoyed it. Thumbs if you liked it, Subs if you loved it. Click the bell to get notified when new useful videos are posted.

[@godiveph1287]

Hi, I use Biox O2 liquid to clean the parts in an Ultrasonic cleaner. Then, I use Steramine to disinfect the regulator. Biox O2 is expensive but the best ultrasonic cleaner in my experience. It’s non toxic, non hazardous, non flammable and used by NATO and military establishments in Europe to clean scuba, oxygenated breathing systems and hyperbaric equipment. Steramine contains Quaternary Ammonium, the active agent used against COVID viruses. Steramine is non toxic, non corrosive and is also used by major food establishments to sanitize food processing equipment, food utensils, silverware, etc.

[@marklaverick3690]

What solution do you use in the ultrasonic bath?

[@marklaverick3690]

What about setting tightening the
Diaphragm Clamp to
30Nm (22.1 ft/lb) and 25 Nm
(18.4 ft/lb) of torque for the handwheel connector?

[@bjsvquasarm-1167]

Mark Laverick hey Mark how about saying thank you to somebody showing you something that's rarely shown , don't see your how to videos ? Not showing torque settings is probably his way of saying this is how it's done but still take your life support gear to a qualified tech for servicing ! ......douchebag

[@marklaverick3690]

@@bjsvquasarm-1167
So you're calling me a douchebag for pointing out a critical safety point that was not highlighted nor mentioned at any point during the video, and for your information ℹ am a trained technician and have seen what the DIYers do to there kit, and following this video could cost someone their life or a buddy in an emergency situation.
And you don't see my video's as I don't record and publish my work.
Knobhead 😂🤣😂🤣😂🤣

[@kadirerdemir8826]

Merhaba arkadaşlar İstanbul dan yazıyorum xtx200 regülatör bakım kiti nereden alabilirim teşekkürler

[@ozanakcan1223]

Ogs marine istanbul karaköy ayrıca internet sitesi üzerinden iletişim kurabilirsiniz yalnız int veya din bakım kiti farklıdır belirtiniz sipariş verirken