An Update on the Ender 3 Pro Upgrades - Part 2
Vložit
- čas přidán 1. 06. 2024
- Part 1 - • First 24 Upgrades for ...
Part 3 - • 15 More Upgrades for m...
Part 4 - • 10 More Upgrades for m...
My Shop: www.scottyujan.com
All music by Cameron Luck: tinyurl.com/camluckyoutube
My Instagram: / scottyujan
If you decide to buy an Ender 3 Pro or other products from Creality, please consider using my affiliate link to help support my channel:
Official Creality (usually cheaper) - bit.ly/3kcSKz0
Amazon - amzn.to/3tkOzpk
♥ Support my Channel ♥
• My Shop: www.scottyujan.com
• Paypal - rotf.lol/paypalme
• Coffee - rotf.lol/coffeeme
Some links below are affiliate links. It doesn't cost you extra to buy through those and I just get a tiny commission. Thank you!
⚙ Tools and Stuff ⚙
My favorite tools of 2022 breakdown - • 42 Tools That Made The...
Bolts and Nuts used - amzn.to/3lHip4j
White PLA: amzn.to/3rNCxE1
Black PLA: amzn.to/30F0Mbu
White PETG: amzn.to/2Niz29F
00:00 - Intro
00:45 - Updates
1️⃣ Raspberry pi 4*** heat sinks ebay.us/TSl5pc
2️⃣ LED light update amzn.to/3vr0HWU
STL: tinyurl.com/p2led
3️⃣ Bed knobs tinyurl.com/p2wheels
Nuts: amzn.to/3iV8BSP
4️⃣ Unbranded glass bed amzn.to/3qR2Szv
Q&A
04:00 - Q&A Disclaimer
04:31 - Why I Chose the Ender 3?
05:46 - Why I Chose the Ender 3 PRO?
06:03 - Why Upgrade This Printer Instead of Just Buying a Better Printer?
07:20 - Why I Chose the Glass Bed?
07:59 - What are my Print Settings?
08:40 - Bye!
🎥 Featured videos 🎥
Alex Kenis' "BFTB design: Z axis wobble, lead screws and bearing blocks"
• BFTB design: Z axis wo...
CHEP's "Direct Drive on Creality Ender 3 for under $30"
- • Direct Drive on Creali...
Teaching Tech's "Ender 3 coreXY conversion kit from Kay3D"
- • Ender 3 coreXY convers...
Teaching Tech's "Ender 3 conversion to 400x400 with the Ender Extender kit"
- • Ender 3 conversion to ...
ModBot's "How To Print With Nylon On The Creality Ender 3 3D Printer"
- • How To Print With Nylo...
RCLifeOn's "3D Printer Makes the Perfect Chocolate Layer"
- • 3D Printer Makes the P...
ruiraptor's "CAKEWALK3D - Printing Food With a Creality ENDER 3"
- • CAKEWALK3D - Printing ...
froh42's "Keeping the pizza dough in a warm placen to let it raise."
- bit.ly/38BuAtW
Thomas Sanladerer's "WhamBam Mutant: A Quick-Change Toolhead Upgrade for any 3D Printer! (NOT on Kickstarter)"
- • WhamBam Mutant: A Quic...
3D Printing Hary's "3D printer Creality Ender 3 to CNC"
- • 3D printer Creality En...
Creality's "Laser kit installation and setup"
- • Crealtiy 3D Printer La...
IndoorGeek's "Draw with your 3D Printer | Plotter"
- • Draw with your 3D Prin...
The 3D Print General's "Automate Your Ender 3!"
- • Video
Proper Printing's "Foldable Ender 3 pro"
- • Foldable Ender 3 pro
#Ender3 #3Dprinting #Creality - Jak na to + styl
Part 1 - czcams.com/video/kG_YKeJDaX8/video.html
Part 3 - czcams.com/video/4jk6kZIwsQA/video.html
Part 4 - czcams.com/video/EQJfDLENYnU/video.html
Get this 3D printer for $189 with this affiliate link: bit.ly/3kcSKz0 and discount code: RP3ROMP10
What time? Also, cheers for the videos, you inspired me to start 3D printing, I now have an Ender 5 and a CR-10!
Cool. Cracking viddy again. Friday sounds good :-)
Scott! Can you link or include a tutorial to your light/Pi power setup so I can do the same and save some outlets?!
@Ayush Patel I did! It's part of why I bought a printer! I'd like to see the schematics or a wiring diagram as to what to connect the wires to a little better!
Cool video, Scott! I need your opinion, which printer do you think is better: Creality Ender 3 v2 or FLSUN Delta QQ-S- PRO? (looking at price-quality ratio)
I wanna buy my first printer and I am thinking between these 2 printers. I mainly want to print detailed figurines.
The "snack for later" continuity was an insanely nice touch lol
But it looked like a different flavor pringle...
@@gearcheck101 The bed just heated it up which baked it a little more :D
Fax
InSaNeLy 🤪
How stale was that Pringle after being near the hot bed and raspberry pi for months
Honestly, an Ender 3 is like having a tuner car. Sure, it works out of the box, but part of the experience is tinkering and making it your own. Which makes it an excellent machine to learn the hobby on.
couldn't agree more. that's a great way of putting it!
Adding on to this, an ender 3 is the Miata of printers. Huge community, cheap but nice, great little thing
The air duster trick blew my mind
Really
I am a subscriber of your chenal
But I like tamatos.
I think you can use cold tomatoes also.
Seems like a bit of an extreme reaction.
The man himself! Tomatoes also help cool off prints :P
Dayum that red to white part swap montage :O
the sound was what done it for me
2:20 I fell like this might be a bad idea since that liquid can cool things down to -40 deg which would introduce a huge amount of stress on a heated glass panel and it might shatter. Also, given what we know about tempered glass, it would just become a million pieces and be extremely annoying to clean up.
For me, I just flipped the glass bed over and used the side without the coating. It would cause bed adhesion problem but I get away by setting the bed temp higher.
This part.
For PLA I just set my bed to 60-65 on the smooth glass surface and it sticks just fine 🤷🏽♂️
Please post a part 4 update when the air duster trick thermal shocks your bed into shattering.
Lol, really though; it's a great tip! Glad to see this update. And you said exactly my own reasons for buying an Ender 3, even better than I could have!
Or some warping.
I like how the chip still crunches,
nice storage!
My man you produce high quality content for having a low sub count I suspect you have experience with photography and video editing but very good job!
Honestly the shot with the replacing red parts with white parts was so damn crisp (especially with the smooth camera movement) you deserve this sub.
Yeeees I've waited soo loooong and he's finally back!!
same!!!
Same haha
Dude I'm digging your videos and vibe. Your thoughts on modifying it regardless or the initial pricepoint is something I share as well, modding your stuff is just way too much fun and makes whatever you buy just that much more special. Looking forward to the new upgrades video!
Thx for taking the time to share your idea's and mod ideas!
This Quality always blows my Mind! Love you and everything about your Channel!
Just want to say I love your work. It's inspiring, looks good, you're a great presenter. Nice work! Makes me want to print more!
Your video descriptions are profoundly well made. Every link you could want is listed and proper credits to others. Thank you for being a responsible youtuber and setting an example to others. I know it's time consuming but we appreciate it. SUBBED n' recommended!
That edit at 3:00 blew my mind. Man I don’t think I’ve ever seen an editing style more satisfying then yours.
I love your editing and shooting clips with true colors of yourself.
Editing still top notch! Love these videos, inspired me to go into the realm of modding printers, even though I own a prusa :)
You have a legit cool vibe and I like your approach to your tools!
I really like your videos man that's an insane quality for your number of subscriber. You deserve your milions of views Keep it up
Your video and editing style is amazing I love the clean cuts and satisfying clicks that you really make pop in the audio.
Again best damn editing I've seen from anyone involved in 3d printing. You take the cake.
Got my Ender 3 last week and followed your first video. Super happy that you're back with new videos! And them edits, bro. Nice.
For nylon, I love using the flex plate, I have a blank whambam flexplate - and I adhere a thin sheet of garolite to it. I use that for nylon, -- just use glue stick, and 90c, and works great. For everything else, swap to the PEI coated flex plate. The magnetic surface makes swapping print surfaces super easy.
your edits and/or beats are great! tysm for your vids
That's a nice video with good info and some slick editing. I bought mine Ender 3 simple version 2 years ago and just today I assembled it. Gonna make few mods to it for sure
i love the glass bed! i use it myself on my ender 3 pro and it works like a charm.
So hyped, I watched the ender 3 upgrade video at least a 20 times. Just to see how I can improve my printer.
same here man
"Just to see how I can improve my printer"
No need to state that. Since that's what that video is all about.
Awesome video Scott! Glad to see you continuing this series :) Looking fwd to seeing Part 3
great content and great video quality. thanks man.
Thanks! Useful & cool-looking video again!
Love your videos man keep it up
Discovered your channel with the Ender 3 Pro video. Loving it!
Love the videos, your upgrades video hooked me on getting this printer.
Cooling the print using spray is an ingenious idea. I tried it & it works like a charm. Thanks :)
Just picked up that Led light. It's zip tied right now but I'm printing your parts to hook it up! Thank you. Best Ender upgrade videos!
Awesome work as usual! Love these vids
Was blown away by that "Dust Off" hack.
Your "24 Upgrades" video helped push me into the "Rabbit Hole" along with the Ender 3 Pro. Feel the same as you about modifying for one's needs and not buying something with all the bells and whistles already attached. Salute hermano
Great vid dude! I watched part 1 a bunch of times because i have an ender 3 but prob also because it was just a fun, well made vid with a great flow. keep it up dude, looking forward to part 3!
Thanks again Scotty - love you man
Thanks for the upload!, always looking forward to your videos :)
Great update. Looking forward to part 3.
Bro you earned every view with your sick editing skills and your attention to detail with your mods!!
Frankly built turned me on to the ender 3.. your first mod video is what had me buy and ender 3.. cannot wait for your next video.. thanks for posting them.
Great job editing.
Dude, your amazing! Really like your video and i‘m ready for Part 3.
Amazing?
I WAITED SO LOOOONG THANKS
Great video man love the uploads keep it up
the editing and music choice is next level. love it
dude your content is so clean , fucking love the effort !
If you need to print smooth flat surfaces use a glass bed, but turn it over with the smooth side up. I also use hair spray for good adhesion to the surface. I print small plastic panels for audio enclosures and the smooth side of the glass bed makes for a very nice and smooth appearance. I use the Creality branded one.
your videos are just so nice to watch
Fantastic video as always, keep it up!
Wow... idk wut to say! I love these videos and the way that you edit them! btw the air duster blower thing Is brilliant! Thank you!
okay, the chip you had from last time got you a new subscriber :D
Dude love your vid there so clean and well made great job man
I’m upgrading my printer rn cause I’ve been having trouble with extrusion and things like that so thanks a lot!!!!!!!!!
Great content glad to see videos again
Hey man! Good video work!
Hello from across the river in PDX!
Breaking the 4th wall into the editing scene transitions are amazing, I’ve never seen that before
I’ve been waiting for this Part 2!
Same
Haha... the editing is over the top. Well done dude!
i'm homeschooled and decided to get the Ender 3 Pro mainly for modding. I have had it for a few months and i've learnt loads
Thank you for the Amazing videos
Dude you are my fave 3d printing youtuber. Can't wait to see what else you do
Filmas muy bien, tus ediciones son de lujo, todo eso con tus explicaciones y se ve que hiciste la tarea y estudiaste sobre lo que hablas. Hacen de tu canal algo totalmente profesional. Tendrías que dedicarte de lleno a esto. Felicitaciones.
I love your videos. They are much better than those pros yakking without any cool stuff. Its nice to have someone who understands what the viewers want.
Hey Scott Thank you so much for these vids I watch your part 1 vid before I even got my Printer. Your vids are very helpful for me as to what Upgrades I want. PS. Your Printer is nice and Clean looking but I must say I preferred the Red to the white. Take care and keep safe from Me in Ireland.
Ive been waiting for this video for a long time
Subbed purely for the transition from desk to video. God thats slick.
New video about 3D print? Didn't expect that. Nice! Happy to see you again!
You didn't expect a video about 3D printing, from a 3D printing channel?
Really?
@@dangerous8333 bruh, he made a video about how to make a camera monitor for $30. Did he use in this video 3D printer?
Keep up the good work Legend
He's done it! Nice video Scott.
Don’t be surprised. You’re editing and video style is amazing and easy to watch. As long as you put out videos at this quality, you’ll get views
WOW THE AIRCANISTER !
you are the best keep going!
Ender 3 is king. The advantage is the fact that it is so widespread. Lots of info and parts available.
your editing skill is great!
Amazing editing part 2
I used to have an ender 3 but it broke and got a better one and the new printer has not even come yet and ngl I already miss the community and the upgrades and this video made me a little sad that i don't have a ender anymore good video keep it up
Yes! waited so long!
I really like your video footage and editing.
So hyped for this vid
I love your videos, keep doing please!
Rapidly cooling hot glass might cause that bed to shatter... just a warning. Although at 60-70 degrees it might not be an issue. The Ender 3 is like the Honda Civic of 3d Printers. FYI PETG parts seem to last longer also print orientation really matters.
You should make an upgrade video for the Ender 3 v2! I just got it and it is currently printing my first print (the benchy). I loved how you upgraded the Ender 3 pro and the and v2 seems even better. I watched your video on upgrading the Ender 3 pro but a lot of the old Ender 3 pro printed parts don't work with the v2. I would love to see you make an Ender 3 v2 version. Just a thought.
I randomly freaking found you - and just realized this video was only a couple days ago. Thanks for the videos! I'm thinking of buying a ender 3
also, you called it a pi3; I am fairly certain you have a pi4 in there.
I've been able to print polycarbonate and nylon filament with my creality PEI bed. Seems to work well and goes up to 100C!
So funny, I just watched part one last night.
New Scott yu-jan upload 🗣🗣🗣
Always the best
Omgosh I just saw part 3 first and asked about the Z axis stabilizer lol.... I didn't realize I missed part 2!
I love your videos!!!
We waited so long for part 2. Glad he's back.
Also I'm having a problem with the glass bed that PLA is not sticking at all to it. Needed to use 3DLac (spray adhesion) for it to work. Is my glass bed defective? Just changed to PEI spring steel bed recently and I've got some decent print on it.
I got an ender 3 pro cause of your vids thanks .
Can't wait for part 3!
Bro its obvious why your video got 1.5 mil views with 12 substribers... HIGH QUALITY CONTENT BRUH you are sooooo good literally no words to describe how clear and great these videos are. Thanks homie
I've been telling people this air duster/freeze spray trick for years, especially for resin prints that can stick super hard to the build surface, but you are the first youtuber I've ever seen mention it.
Also FYI for anyone with a resin printer: If you have a very large, flat bottom of your print you can also stick the whole thing in the freezer and then once its cold hold the platform and dip just the print in some hot water and it will pop off of the build platform. No more need to fear putting large flat areas on your build plate, and you can get much better adhesion while printing because of it.
good to see you agin
I have a Pi3B as well and I find that OctoPrint was always ~50% CPU utilization and I wasn't even using any fancy plugins. I made the switch to KIAUH/MailSail and I love it. My Pi is a lot happier, too :)