Every Mod On My V6 Chrysler 300S | Interior | Engine | Exterior | Exhaust
Vložit
- čas přidán 14. 03. 2022
- #V6 #chrysler #exhaust #modifications
This is the video a lot of you have indirectly asked for, everything I have done to my car so far with the links to them all and prices. I had to keep pushing this back because I wanted to be outside my garage for this and weather finally played along so let’s get into it.
List of Modifications
Interior:
Door Sill Protectors
ebay.us/OF2wur
Paddle Shifters
www.amazon.com/shop/mopar300s
Radio Knobs
www.amazon.com/shop/mopar300s
Interior Lighting
www.amazon.com/shop/mopar300s
Accent Camo Vinyl
www.amazon.com/shop/mopar300s
Red Floor Mats
www.diamondcarmats.com/produc...
Subwoofers
www.memphiscaraudio.com
Engine:
Cold Air Intake
AF Dynamic Air Filter intake... www.amazon.com/dp/B01LE56MQ0?...
Crankcase/Engine Breather Filter
www.amazon.com/shop/mopar300s
Throttle Body Spacer
ebay.us/GILmgj
80mm Ported Throttle Body by MMX
www.modernmusclextreme.com/c-...
Red MSD Coil Packs
www.holley.com/products/ignit...
NGK Iridium Spark Plugs
www.autozone.com/external-eng...
Ripp Mods Oil Catch Can
rippmods.com/collections/chry...
Ripp Supercharger
rippmods.com/collections/chry...
Exterior:
Brakes/Rotors
www.r1concepts.com/detail_cat...
Underglow
www.amazon.com/shop/mopar300s...
Tail Light Tint
VViViD Air-Tint Extra-Wide... www.amazon.com/dp/B01KGKIG54?...
EZ Lip - The Original Universal Fit 1-Inch Lip Spoiler www.amazon.com/dp/B009F10S3Y/...
Spoiler
Trunk Spoiler Compatible With 2011-2021 Chrysler 300, Factory Style Unpainted ABS Car Exterior Trunk Spoiler Rear Wing Tail Roof Top Lid by IKON MOTOR www.amazon.com/dp/B00QA4HPEO/...
New Wicker Bill
ebay.us/2KtShV
SRT Rear Valance
ebay.us/jX5n6u
LED Side Marker Lights (Rear)
www.amazon.com/shop/mopar300s...
LED Side Marker Lights (Front)
www.amazon.com/shop/mopar300s...
Aftermarket Headlights
lightingtrendz.com/collection...
Wheels & Tires
MoparSteel345 💪💪 - Auta a dopravní prostředky
There’s nothing to dislike about the video……unless you’re just a hater and love negativity. Don’t be that guy/gal.
You’re super charging a penta star V6 bro it deserves some hate 😂
Bro where did u get the door panel decor I want something like please answer
@@nickgivens6378I mean some of us are brokies and can only afford a V6 sadly
Just got my 2019 Chrysler 300s today, already loving it and can’t wait until I start the mods!!! 🙏
Once you start you can’t stop 🤣🤣 That’s the downfall of modding but it’s so enjoyable
The music in the background, perfect volume. Flows good with the video brother.
Hey man, love all your mods, still working on some things for my 2019 300S. Recently got the OPT7 interior lights, definitely gotta do that under glow, got some weathertech floor mats as well recently, super clean. Keep up the videos man, cant wait to see that supercharger!
Yessir! You already know!
Some nice mods. Nothing bad about making it look the way YOU like it.
buying my 300 tmr and already thinking about some mods you had , you interior looks fire 🔥🔥
You're absolutely right bro. If people don't like the mods, they are most definitely hating. Great video. Love all the mods.
I do love my Chrysler 300s. I have a 2005 bought it 6 years ago and still runs great. I think for a luxury car they look mean and stalky. And I really do like the interiors of them. Looking forward to buying another one in the near future probably a V8 all-wheel drive. Keep doing videos on these Chryslers they deserve it. God bless
Let’s fucking Go!!!! Big list of things you’ve done. But bigger than that is the imprint in the V6 community my man!!! 😤😤😤
💪💪💪
Very cool. I love my v6 awd 300. So much fun in the snow
I'm looking forward to purchasing one soon. This video is right on time
Great videos man definitely an inspiration for the 300 community 🙌
I’m aiming to help the V6 community in general one video at a time. Wish more people would do videos and show what they’ve done outside of the things that are already known
And thank you Bro!! I’m trying hard lol.
Only thing I’m mad at is u didn’t display all your mods. I wanted to see what that foot lighting looked like and what the headlights look like turned on at night.
First of beautiful 300 I'm a new subscriber and digging your 300 👍🏼not many CZcamsrs with chrysler 300 content so I'm definitely sticking around I'm fellow chrysler owner with beautiful 2012 Awd with a 5.7 liter hemi & 2016 300c fully loaded with the 3.6 pentastar
Hell Yeah!!! 300 Gang! The Hemi is a underrated one
Thnx bru!!! Inspiration 4 us 300 lovers.
I'm still deciding on mods. I'm just starting, but your channel is giving me lots of good ideas
Definitely adding some of these to my 300s but ima change up the style of course thank you for putting me on some accessories
My 300 is in the body shop rite now, can’t wait till that beauty’s finished
Gotta 2016 sport. Just paid it off. Now I'm go do all mods since God has blessed me to own it
At present, I have a 2011 Chrysler 300C with the 5.7 liter Hemi V8 engine, 5-speed transmission, and rear-wheel drive. Recently, I ordered a 2024 Chrysler 300 Touring L with all-wheel, 3.6 liter V6, and the 8-speed transmission. So, your video episode is really good for me. May God bless you 🙏 always in your life journey.
If you have a C it’s AWD fam
You said excuse the dirt I drive my car 😂 I love it
Cars can’t be showroom clean 24/7 lol. It’s impossible
your car tuff asf🤝🏾
I just purchased a 300S waiting on delivery and I’ve watched almost all your videos I love your set up and I have definitely took notes ✊🏾💯
Same here g lmfaooo, I been waiting for 2 months now😭😭
@@David-js6sl you been waiting 2 months for your 300?
@@rambobambino26 yeah bro it’s getting fixed across the border (Nuevo Laredo, Mexico) I live in a border city (Laredo) so it’s way cheaper for me to fix across, but there’s been a lot of violence and other issues recently so the process has been delayed. I bought mine off an auction for like 6k (2018)
@@David-js6sl oh ok i see we’ll I hope you get it soon bruh Frfr mine should be here next week
@@rambobambino26 thanks bro🙏🏼 likewise man, can’t wait🤩
Hey man! I have an 2018 300S and I have pit in an Edelbrock 2650 Supercharger, Hellcat headers and exhaust, lowered and got some sweet 20" Stance FX6 bronze rims with Nitto tires 305/35 on the rear and 275/40 on the front. Putting in a 13.3" Nav/ stereo. Still got more planned!Cheers! Good videos! Waiting to see you Ripp Supercharger installed
Mungo!
So you definitely got the 5.7 or 6.4. Lol. Good shit!!! Sounds like a badass setup to me man.
Oh yeah, got a shop to do the install and tuning. Ripp said early May it’s getting shipped
Yes 5.7 Hemi 520whp
Definitely subscribing.
Mopar or nocar.
Good old trick I learned for rust.... Zinc anodes are added to marine engines in order to prevent rust, they work akin if you attach them to car frames. Virtually your entire car will be safe from rust. Can get them from pretty much any local marina, or even Amazon.
You done a good job
Nice car, my brother.
Dream car 🙏🏽
Love it
Bought my paint from G2usa it's great 4 years and still great and color holds up in ohio winters
That intro making me look bad out here had my phone up 😂
I get alot of good comments mines a V6 but everyone loves it it is stunning
Very Beautiful Ride
Appreciate it homie 💪💪
I have a 2016 300s in white as well brother and I love it
Nice whip I have the same is that car I have black wing on the rear I have everything but a sunroof
Bro all the mods are sick I got a 2013 I want mines to be as nice as yours
I have a 2013 also. I want to change the front grill
Ayeoo the begging tho🤣
you have to get the rear led lights over the tail pipe holes the rear reflectors you change those out and make them led lights there sequential also. I have them on mine about 40 bucks about hour of your time
Yooo I’m interested in what you’re talking about can you explain where you got those from and how they work
looks nic ei have 2019 s and i wish i could do a few upgrades
Whats going on man. I've enjoyed your videos, and decide to comment on this one to ask a couple questions
1. Your RGB headlights are from lighting trends, but are they smoked?
2. Have you ever considered upgrading to the 4 or 6 piston brembo brakes from the hellcats?
3. Have you installed the supercharger?
4. Where did you get your rotors? Rockauto has a set that are relatively cheap. I just need more info on how to upgrade to 4 or 6 piston, which is why I asked question 2.
5. Do you know where I could get the paddle shifters (not the clip ons, the actual steering wheel) and do you know how I could hook it up to work? I don't have a 300S.
Looking forward to a response. Perhaps you go 4 or 6 piston upgrade and can fill us in. Same with the supercharger
My favorite mod was the exhaust set up
💪💪
Back in my day we used
shaving cream to get rid of rust.
Slide off like butter.
Looks like my rental 300S I currently have. Video with a review coming out soon. There is good and bad as with every car. I don’t hate any vehicle.
nice car
Bro you should try out a Pedal Commander it does wicked things with the ripp supercharger when you get it all done. It’s even fun with out the supercharger
Have you used one without the supercharger? Been thinking about getting one for my 300
I would like to get one of those 3-d pop out grills like a rolls Royce.
My opinion on mods...ESPECIALLY.....on popular cars.......is to make the car to suit YOUR personality and separate yourself from all the other similar looking rides.Love what you did to your car and if you smile when you look at your car.....then you've accomplished what you were trying to achieve.Remember do it for you....if others like/ love it....peace and love to them....all others?......who cares.I like the engine mods because everyone always focus on the outside, but if your engine is clean and matching with the rest of the car, its similar to wearing clean matching underwear.
Tell me more about the exhaust I love the way it sounds
Not sure if I just didn't hear it but what other upgrades besides a throttle body cold air Intake and spark plugs I'm thinking about doing some of this to my 300 but just want to hear your thoughts
Bought mine before my stoke got to let it go but I love my 300
That’s what I’m doing I have a v6 300s 2019 I’m dropping a 6.4 in it
You can prep it and paint it with Rust-Oleum
With all the mods, I'm kinda surprised you didn't get the pedal covers for approx $20 @ most. Also, the door handle covers that can be done in Black.
And for your intake if don’t want it u can slide it over here for the low
did you change your dash lights? I just picked up a 2019 300 Touring, and want to make it my own, the one thing i hate is the blue back light on the dash, and want to change the color, but have not been able to find anything on it anywhere
Nice car... Can u explain why u got a catch can if it's not turbo'd? Just wonderin
I wanna know how much hp you have. Cause i literally have majority of the same bolt on mods but they didn’t give as much power as i wanted. Lucky for me i managed to find someone who tunes V6 300s and i went from 292 to about 350hp & 300 torque. I’ve heard that bolt ons don’t really work unless you get them tuned. So my question for u is what’s your HP before and after all bolt ons? And do u have a tune why or why not and would u get one before the super charger. Promise if u get a tune you’ll notice a big difference
I'm buying a 2018 limited AWD tomorrow am I have 2022 300 rwd wheels for it they aren't staggered they are brand new 245/45/20 so much questions is did you have to run a little spacer on the front? I've had a few AWD Magnums an ran 255/45 20 all the around with no issues but those are much older so I'm not 100% sure about how these new 300s are this is my 1st AWD 300.
How much was that muffler delete bro? And where do you recommend? I’m out in Colorado Springs.
What did you use to cap off the air intake when you added the small breather filter?
The 🌽 hub music is crazy 😂😂😂
I have exact same 300s in white 2016
The beginning of the video 😂😂😂😂
I like all the mods but i need to know how to change the high beam head lights, mine suck!!!!
Its a nice car im not knocking the fact uf u like it u like it kinda thi g but there are some ricy aspects to ur car like dont paint ur rotor hubs bro . The wrap isnt terrible but on the fuse box cover is kinda gotty idk just my opinion otherwise its a nice car bro
I don't know what your talking about as far a audio goes bro, because my 300 2018 awd v6 has an 509 watt 7 speaker alpine from the factory. I guess you should have got the big man setup
Did you have to use a spacer to get those wheels on there?
😍😍😍
Is your spoiler bolted or taped?! Want to do the wicker bill but my 300s has no spoiler
What about you doing a supercharger. I would love to see how much horsepower you get.
What's the best security system/ programmer to use?
The MSD coilovers and iridium spark plugs… did you see a huge difference after installing? And do you recommend these over RIPP coilovers or vice versa?
More juice when I hit the gas. That was instantly noticed. As far as Ripp goes, Ive seen too many forums about them misfiring or going bad so I can only go based off of the reviews.
But, to answer your question, I'd recommend Ripp ones due to the power gained from them. Just hit or miss if they keep running as designed.
My Chrysler doesn’t come with side markers , can I ask the shop to install them ?
Keep it man and do a engine swap
What do you think about the MMX hemi throttle body adapter kit ? Is it the same ? Or a difference from ported to normal 80
From everything I’ve seen it’s the same as the ported 80mm Throttle Body they offer.
Except it’s not ported. It’s just a 80mm which you can’t really go wrong with either way you look at it
@@Mopar300S what made a bigger difference coils with plugs or throttle body.?
he just had to pick that soundtrack for the intro lol
Is it okay to add a oil catch can
@Mopar300s did the intake cause a check engine light to come on
No, went right on and ran better. The sensor not being positioned correctly may cause that but I haven’t seen it happen
Don't know if you check your messages. I live in Lone Tree Colorado and did know that you could really help me out with some of the parts that you've been. Usi bought a 2000 sthen Christ said 300 S and I would love to do some work on mine. It's white, pure white.
Hello i got the 300c 2013 and i need help building it up
Where did you order the cherry bombs for your exhaust
And what you do with that cold air intake
How can I modify my 2021 300 3.6
I definitely wanna trade my charger in for a 300
Your experience with Ripp is what I am using to make my final decision of 6.4 swap or this. 🙏🏾
Soon brother. Soon. So far it’s good. They customer service is top notch
I actually went with ripp based off of Boosted Lucky. But I’m hoping to bring some fire content with it but I’m gonna be 100% honest about it all.
But on the 6.4 note, I’m good with a guy that just completed his swap. He should be introducing it to CZcams here soon. Car is all the way swapped. It’s nice as hell
What exhaust did you use
Cosmticscosmetics cosmetics!!!!
Where at in co are you ? I’m in Denver Lakewood
so you put 20in tires on your factory rims
Bruh I got blue carbon fiber in my 2017 300s..I tried to share a picture on here but it won't let me
I need a harness for my fog lights someone point me in the right direction please
What size are ur wheel spacers???
I’m actually not running any spacers brother.
How much you paid?? For the car
Hey bro love the channel just got my 300s didn’t come with the beats sub tho I’ll be more then happy to take it off your hands
I would let it go, I want to figure out a way to run it with the system. I’d get on eBay for one if you’re serious about getting one though
Can u get lowering springs ? Would you
I can. The kit cost 299 for the springs for my car. Would I do it? Yeah. Just the issue of CV joints going bad a lot quicker with it. Still on my radar for a mod though lol
Nice
I asked soMeone that works for dodge they said those springs wouldn’t fit on AWD
@@victorrosales530 there’s specific ones for the AWD model 300’s. fasthemis.com/i-23893616-hr-sport-lowering-springs-chrysler-300-dodge-charger-3-6l-v6-rwd-awd-2011-2022.html?ref=category:1204071
@@Mopar300S there is none for mopar ? Beans
Have you put that sexy machine on a dyno yet?
Not yet. But it will go on once it’s sent to the shop for the SC install/tune.
I’d love to say I’m sitting around 320-330HP though. Based on numbers each thing adds according to the sites that’s a safe bet
yo bro my humble request please change intro BGM 🙏🙏🤦
put a 5.7 in it
🍚
The brake caliper paint is not good
Gone cost but everything costs