HOW TO USE STICK - the world's stickiest powder coating potion

Sdílet
Vložit
  • čas přidán 23. 08. 2024
  • Stick is a seriously sticky potion designed to powder coat just about anything. You can use it with all our pigments and glitters!
    if you'd like some you can grab it here:
    www.culturehus...
    Thanks so much for your support and I hope you enjoy playing with this stuff!
    Love
    Stuart x

Komentáře • 40

  • @Nasreenart
    @Nasreenart Před 5 lety +41

    A glue that dries tacky is invaluable to so many crafters. Most glues dries too quickly to get anything done and some glues are too starchy and and thick and wrinkles your paperwork. Stick would be amazing for decopague, doll house miniatures, papercrafts, collage and so manyo ther crafts to name a few.

    • @StuartSempleArt
      @StuartSempleArt  Před 5 lety +7

      Absolutely! Yeah I think it's more useful than it at first seems ;P I'm hoping it will open a lot of creativity up to the community!

  • @biolabsaudiovisual
    @biolabsaudiovisual Před 5 lety +24

    You put the mask on before applying Stick, and took it off to do the powder???

    • @StuartSempleArt
      @StuartSempleArt  Před 5 lety +30

      Yup! I know... my bad. I was finding it difficult to talk and it was getting in the way. Don;t be like me! Wear your mask!

    • @CMThota
      @CMThota Před 2 lety +2

      @@StuartSempleArt This advice aged well

  • @SundogTamaskan
    @SundogTamaskan Před 3 lety +6

    Ok, so I got this but I'm looking for videos and additional info and I just can't find anything. So is there a way to clean the soft brush we use to apply stick or is it a loss after use?

  • @BrendanReagan
    @BrendanReagan Před 4 lety +2

    Stick was new to me, even though I thought I knew all your products. Thanks for the video.

  • @elvisburton6199
    @elvisburton6199 Před rokem

    Thanks for the video! I wasn't sure what "stick" was. I love ALL of your products and if I find myself in a "stick"-y situation, I know where to go. THANK YOU!!

  • @cj4200
    @cj4200 Před 3 lety +1

    Will this work with black2, and woul it be durable enough to use outside. On my car actually.

  • @thetimetravellingtailor6323

    Is stick flexible? Like, if I were to put it on fabric would it cause the fabric to become very stiff and would it start flaking off quickly from something flexible?

    • @StuartSempleArt
      @StuartSempleArt  Před 5 lety +6

      It's pretty flexible - it won;t crumble off or anything, the issues you will have will be with whatever pigments or powders you use, the finder the pigment the less likely it will be to crumple. In most cases you should be fine :)

  • @cypherglitch
    @cypherglitch Před 5 lety +8

    How well does "LIT" work with "Stick"? I was going to get "Stick" for "LIT" but I would like to know if it works, and how well, before I buy it. How well would/does it work if I put "Stick" on "Black 3,0" to apply "LIT" on it? I thought it may be brighter than mixing it with "Super Base"
    Thanks

  • @dericflairmultiverse4952
    @dericflairmultiverse4952 Před 3 lety +2

    is it compatible with even diamond dust?

  • @user-vi9vd5lt8t
    @user-vi9vd5lt8t Před 11 měsíci

    I'm thinking about the following: I want to coat the membrane of my subwoofer. It should be as black as possible. Nobody will ever touch the membrane with their bare fingers afterward 😁 The material must remain just a little bit flexible without splintering. Does that speak for stick with the Black 1.0 powder? Or would you prefer Black 3.0?

  • @HmmmmmLemmeThinkNo
    @HmmmmmLemmeThinkNo Před 5 lety +3

    Should we still put a protective coat over pieces using stick and a powder?

    • @StuartSempleArt
      @StuartSempleArt  Před 5 lety

      Only if you want to. There's not really any need it's pretty durable but if you were using it outside or you were handling it a lot then you'd need it.

  • @Sylocat
    @Sylocat Před 5 lety +2

    Can you powder coat something with Phaze?

  • @larrystrayer8336
    @larrystrayer8336 Před 3 lety

    My question is; after the powder coat transfer to the sticky can to be heated to powder temp 200°c

  • @ABM261-zi2gl
    @ABM261-zi2gl Před 5 lety +2

    Can you use your glow powder (LIT) in epoxy resin?

  • @theresepankey9978
    @theresepankey9978 Před rokem

    Will this and the glow in the dark work under epoxy?

  • @missartist123
    @missartist123 Před 5 lety +1

    It looks like a great glue for gold leafing

    • @StuartSempleArt
      @StuartSempleArt  Před 5 lety +9

      Weirdly - it's not so great for gold leaf, its a bit too sticky! There are plenty of good products out there specifically for gold leaf that would be way better. x x

    • @Fukurokujo
      @Fukurokujo Před rokem

      @@StuartSempleArt why is too sticky a problem? and do you have a recommendation for use for gold leafing?

  • @chefgregg4966
    @chefgregg4966 Před 3 lety

    is there a way to revive stick if it arrives unusable?

  • @acanthus9643
    @acanthus9643 Před 3 lety

    Can i use this on top of photopaper? Im doin some scrap booking

  • @Uji_Metal
    @Uji_Metal Před 4 lety

    Hi Stuart, can this be used in the same way yves Klein made his international Klein blue? Basically I have experimented with adhesives and powder pigments but the object always leaves pigment on my fingers after touching it. Does your product solve this? Would love to order.

  • @JayRamzy
    @JayRamzy Před 3 lety

    Will this wear off with friction? Thinking about using it on a guitar neck

  • @rebb4352
    @rebb4352 Před 5 lety

    Can you use your pigments to dye yarn

  • @ashleyflores9457
    @ashleyflores9457 Před 4 lety

    I was wondering if i use stick with lit if it would still work

  • @Mrjoker622
    @Mrjoker622 Před 4 lety

    Hi do you have an email so I could get hold of you have something to share with you thanks

  • @Fatass_
    @Fatass_ Před 5 lety

    Neeed coooaat

  • @johnathangillespie2075

    I keep getting this feeling ive met you at one of my student exhibitions year's ago XD

  • @zair8265
    @zair8265 Před 4 lety

    Is this skin safe?

    • @Goontender
      @Goontender Před 2 lety +1

      For use on skin No,
      If you do get it on skin, it probably won't hurt ya

  • @miggs80
    @miggs80 Před rokem +1

    I’m just here to watch conspiracy dorks pretend pretend space isn’t real despite them being experts at nothing.

  • @spacepope2108
    @spacepope2108 Před 3 lety

    So... Elmer's glue and glitter.

    • @aliceinchainsaw111
      @aliceinchainsaw111 Před 3 lety +1

      Yes this is "elmer's glue and glitter" in the same way that hamburger helper is a concise culinary concoction with specific purpose.

  • @boom_fishfish4987
    @boom_fishfish4987 Před 3 lety +1

    Hello I know this is nun of my business and I don’t wana be mean but I have to be honest and this is just to help you CUT YOUR HAIR 💇 and plus it comes on your face and again I am not trying to hurt your feelings or again I am not trying to be mean . Sorry if I hurt your feelings